STICK
®
Excalibur 11018M MR™
Basic, Low Hydrogen, Low Alloy Steel SMAW Electrode
(AWS E11018M-H4R)
Excalibur® 11018M MR™ is designed primarily for joining high strength steel types in the as-
welded or stress relieved conditions with excellent low temperature impact properties and
robust welding procedures. All-position welding, except vertical down.
Welding Positions
Advantage Lincoln
Integrated Silicate Technology™
Increased moisture resistance and decreased coating fragility.
1G
4G
2G
2F
3F
3G
1F
Easy Strike™ Tip
Consistent, smooth arc starts.
Square Burn-Off
4F
5G
6G
Focused arc for hard to access welds.
X-Ray Quality
Conformance
Demanding applications.
AWS A5.5/A5.5M:2006
ASME SFA 5.5:1996
CSA W48-01:
E11018M-H4R / E7618M-H4R
E11018M-H4R
E7618-M-H4
Hermetically Sealed Packaging – Easy Open Cans
Delivers quality product, performance reliability and
consistent results.
ISO 9001 and 14001 Certified
Manufactured to standards for environmental and quality
management systems.
Typical Applications
• Certain Weldable Quenched & Tempered Steels, such as
- T1, A514, A517 and A709
• General Fabrication Requiring E11018-G or E11018M
Electrode Classification.
DIAMETERS / LENGTH / PACKAGING
TYPICAL OPERATING PROCEDURES
Polarity
Current Range (Amps)
Diameter
in. (mm)
Length
in. (mm)
10 Lb. (4.5 kg)
Easy Open Can
50 Lb. (22.7 kg)
Easy Open Can
3/32 in.
(2.4 mm)
1/8 in.
5/32 in.
(4.0 mm)
3/16 in.
(4.8 mm)
(3.2 mm)
3/32 (2.4)
1/8 (3.2)
5/32 (4.0)
3/16 (4.8)
14 (350)
14 (350)
14 (350)
14 (350)
ED031972
ED031973
ED031974
ED031975
ED031976
ED031977
ED031978
DC+
70-110
90-160
130-210
180-300
MECHANICAL PROPERTIES – As Required per AWS A5.5/A5.5M:2006
Charpy V-Notch
Diffusible
Tensile Strength
psi (MPa)
Yield Strength
psi (MPa)
Elongation
%
ft*lbf (Joules)
@-60°F (-50°C)
Hydrogen
ml/100g
Requirements
AWS E11018M-H4R
110 (760)
min.
98 - 110
20
20 (27)
≤4
(680 - 760)
Test Results
111 - 117
100 - 110
20-25
40 - 65
1-4
As-welded
(765 - 807)
(690 - 758)
(54 - 88)
DEPOSIT COMPOSITION – As required per AWS A5.5/A5.5M:2006
%C
%Mn
%Si
%P
%S
%Ni
%Cr
%Mo
%V
Requirements
AWS E11018M-H4R
0.10 max
1.30 - 1.80
1.55 - 1.80
0.6 max
0.030 max
0.030 max
1.25 - 2.50
1.90 - 2.50
0.40 max
0.25 - 0.50
0.05 max
Test Results
0.04 - 0.05
0.40 - 0.55
0.010 - 0.030
0.005 - 0.020
0.02 - 0.15
0.35 - 0.50 0.005 - 0.015
Publication C2.10.1 10/06
|