Technical data sheet for
ELECTRIC COOKTOPS 900mm
E516D-B, E516D-CB, E516D-LS, E516D-RB,
E516C-B, E516C-CB, E516C-LS, E516C-RB,
E516B-B, E516B-CB, E516B-LS, E516B-RB,
E516A-B, E516A-CB, E516A-LS, E516A-RB
Heavy-duty construction
2.4kW open radiant elements
Optional hot plate elements
300mm, 600mm and 600mm griddle
plate options
3 models of base unit
1 model of refrigerated base
Rear rollers
Stainless steel exterior
Easy clean
Easy service
Fully modular
E516D-LS
Refrigerated Base (supplied as –RB model)
• Self contained suite matched modular base
• Ventilated system with R134a refrigerant
• -2 to +8°C temperature (Tropical Climate rated)
• Two GN 1/1 drawers
Overall Construction
Cooktop
• Welded hob with 1.5mm 304 stainless steel bull nose
• Side panels 1.2mm 304 stainless steel
• Splashback 1.2mm 304 stainless steel
• Vitreous enamelled control panel
• 2.4kW open radiant elements in heavy-duty welded element frames
• Stainless steel spill trays
• Hot plate elements with machine finished 8mm steel plate
(optional extra)
• 12mm thick mild steel griddle plates
• 100mm deep pan capacity
• Heavy-duty European telescopic drawer guides
• Magnetic drawer gaskets (replaceable without tools)
• 50mm fully foamed CFC free insulation
• 304 stainless steel exterior and interior
• Anti-corrosion treated evaporator
• 2.5mm 304 stainless steel griddle splash guards
• Aluminised steel internal construction
Griddle sections are standard on RH side. Available on LH side or
centre to order.
• No condensate drain required
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
adjustable feet
• Condensing unit removable through front of unit for service
• Easy clean interior
Bench mount (supplied as –B model)
• Four 63mm dia. heavy-duty 1.2mm 304 stainless steel bench legs
with adjustable feet
• Adjustable height 80mm – 105mm
Controls
Cooktop
• Large easy use control knob - heat resistant reinforced
• Easy view control settings on knob
Cabinet Base (supplied as –CB model)
• Fully modular for match suite finish
• Double skin 0.9mm 304 stainless steel interior and exterior
• Optional GN 1/1 4 position racking kit
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two
adjustable feet at front and two rollers at rear
• Radiant elements with energy regulator controls
• Hot plate elements with energy regulator controls
• 50-320°C thermostat per 300mm griddle section
• Indicator lights for power and heating for each griddle control
• Power indicator light for each element control
Leg Stand (supplied as –LS model)
• Fully modular for matched suite finish
• Framed top for connection to Cooktop
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two
adjustable feet at front and two rollers at rear
• Fully modular framed stand shelf with 0.9mm 304 stainless
steel finish
• Quick assembly design
Refrigerated Base
• Digital control electronic thermostat
• Automatic defrost
• Automatic evaporation of defrost water
• -2 to +8°C temperature range
Cleaning and Servicing
• All models with easy clean stainless steel external finish
• Removable vitreous enamelled element module and hob spill trays
• Lift up element and griddle sections
• Access to all parts from front of unit
• Refrigerated Base condenser removable through front of unit
|