Online User’s Guide
Dual Band/Tri-Mode
PCS Phone
Nokia Model 3585
Welcome to Sprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Introduction to This
Online User’s Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting Up Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Activating Your PCS Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Getting Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SECTION 2: Understanding Your Phone . . . . . . . . . . . . . . . . 11
Your PCS Phone: The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Front View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Viewing the Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Features of Your Nokia 3585 Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Switching Your Phone On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using the Battery and Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Displaying Your Phone Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1-Touch Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Missed Call Notification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Calling Emergency Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Dialing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
In-Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
End-of-Call Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Controlling Your Phone’s Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Customizing Profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Selecting a Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adjusting Volume Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Ringing Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Alert Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Customizing the Welcome Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Customizing the Display Banner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Adjusting the Screen Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Setting Your Phone’s Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Accessing the Security Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Locking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Unlocking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Changing the Lock Code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Calling in Lock Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Locking and Unlocking Your Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Restricting Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Removing Restrictions to Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using Allowed Numbers When Phone is Locked. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Restoring Factory Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Controlling Your Roaming Experience . . . . . . . . . . . . . . . . . . . . . . . . . 37
Understanding Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Setting Your Phone’s Roaming Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Controlling Roaming Charges Using
Call Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Navigating Through Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Menu Navigation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Reviewing Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Reviewing the Internal Phone Book Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Managing Call Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Viewing Call Logs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Call Logs Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Making a Call From Call Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Viewing the Time of a Call From Call Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Viewing a Number From Call Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Using a Number From Call Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Saving a Number From Call Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Adding a Number to a Pre-existing Name in Your Phone Book . . . . . . . . . . . . . . . . . . . . 58
Deleting a Number in Call Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Personal Organizer and Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Adding a Memo or Reminder to Your Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Entering Characters Using T9 Text Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Adding a Word to the T9 Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Calendar Alerts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Event Alert Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Viewing Events and Event Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Deleting a Day’s Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Going to Today’s Calendar Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Automatically Deleting Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Using the Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Playing Games. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Internal Phone Book Entry Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Selecting a Character Input Mode In Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Adding a New Internal Phone Book Entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Finding Internal Phone Book Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Adding a Phone Number to an Existing Internal Phone Book Entry . . . . . . . . . . . . . . . . 70
Editing an Internal Phone Book Entry’s
Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Editing an Internal Phone Book Entry Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Selecting a Ringing Tone for a Phone Book Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Dialing PCS Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Deleting Your Phone’s Internal Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Voice-Activated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Changing a Voice Tag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Deleting a Voice Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Recording Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Memo Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Deleting a Recorded Memo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
SECTION 3: Using PCS
Service Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
PCS Service Features: The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Using Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Voicemail Notification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
New Voicemail Message Alerts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Retrieving Your Voicemail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Voicemail Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Responding to Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Making a Three-Way Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Using Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Additional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Ringing Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Games. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
PCS Voice CommandSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Getting Started with PCS Voice Command: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Creating Your Own Address Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Making a Call With PCS Voice Command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
SECTION 4: Safety Guidelines and
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Getting the Most Out of Your Reception. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Maintaining Safe Use of and Access to
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Caring for the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Acknowledging Special Precautions and the FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . 103
Consumer Information on Wireless Phones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
User Guide Proprietary Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Welcome to Sprint
print built the largest all-PCS nationwide network with advanced
S
multimedia services and clear calls, reaching more than 230 million
people for clarity you can see and hear. We built our network to give you
what we believe you really want from a wireless phone, clear sound, private
conversations, and time-saving features.
But with Sprint, you can do something even more far-reaching—simplify
your life. Our advanced technology is designed to grow with your
communications needs so that one day you'll be able to rely entirely on your
PCS Phone to stay connected.
This guide will familiarize you with our technology and with your new
PCS Phone through simple, easy-to-follow instructions. If you have already
reviewed the Start Here Guide, which was packaged with your new phone,
then you're ready to explore the advanced features outlined in this guide.
If you have not read your Start Here Guide, go to Section One - Getting
Started. This section provides all the information you need to quickly
activate your phone, set up your voicemail, and much more. It also contains
information on how to contact Sprint, should you have questions about
service, want to purchase additional products or services, or just to check
your account balance.
Thank you for choosing Sprint.
1
2
Introduction to This
Online User’s Guide
his Online User’s Guide introduces you to PCS Service and all the
ᮣ
features of your new phone. It’s divided into four sections:
Section 1: Getting Started
ᮣ
Section 2: Understanding Your Phone
ᮣ
Section 3: Using PCS Service Features
ᮣ
Section 4: Safety Guidelines and Warranty Information
Throughout the guide, you'll find tips that highlight special shortcuts
and timely reminders to help you make the most of your new phone and
service. The Table of Contents and Index will help you locate specific
information quickly.
You'll get the most out of your phone if you read each section. However, if you'd
like to get right to a specific feature, simply turn to that page. Follow the
instructions in that section and you'll be ready to use your phone in no time.
Tip: You can print out this guide to keep on hand. When viewing it online,
simply click on a topic in the Table of Contents or on any page reference
within a section to go directly to that topic.
Tip: The phone must be switched on to use most of the phone's features. Do
not switch on the phone when the use of a wireless phone is prohibited or
when it may cause interference or danger.
3
4
6
1A
Setting Up Service
In This Section
ᮣ
ᮣ
ᮣ
Activating Your PCS Service
Setting Up Your Voicemail
Getting Help
his section walks you through the basics of setting up service for
your PCS Phone, including unlocking and activating your phone,
setting up your voicemail, and how to contact Sprint for assistance with
your PCS Service.
Section 1: Getting Started
1A: Setting Up Service
7
Activating Your PCS Service
Determine if Your Phone Is Already Activated
If you received your phone in the mail or purchased it at a Sprint Store, it
probably has been activated. All you need to do is unlock your phone.
If your phone is not activated, please refer to the Start Here Guide
included with your phone.
Unlocking Your Phone
If your phone is locked, follow these steps to unlock your phone:
1. Press and hold the power button ( ) located at the top of your
phone to switch the phone On.
2. Press Menu, then enter your lock code. For security purposes, the
code is not visible as you type.
Note: Throughout this user guide, you will be instructed to press keys in a
particular sequence to activate functions. These keys are navigation (scroll) keys,
hard keys (numbers, letters) and soft (left/right selection) keys. Soft keys are
determined by the text above them on your display screen.
Tip: If you can’t recall your lock code, try using the last four digits of either
your Social Security number or PCS Phone Number or try 0000. If none of
these work, call PCS Customer Solutions at 1-888-211-4PCS (4727).
Activating Your Phone
To activate your phone, follow the directions in the Start Here Guide that
was included with your phone.
Section 1: Getting Started
1A: Setting Up Service
8
Setting Up Your Voicemail
All unanswered calls to your PCS Phone are automatically transferred to
voicemail, whether your phone is in use or turned Off. Therefore, you will
want to set up your voicemail and personal greeting as soon as your
PCS Phone is activated.
To set up voicemail:
1. Press and hold
for 2 seconds.
2. Follow the system prompts to create your pass code, record your
greeting, record your name announcement, and choose whether to
activate One-Touch Message Access (a feature that lets you press one
key to access messages and bypasses the need for you to enter your
pass code).
Note: The voicemail setup process may vary in certain Affiliate areas.
Getting Help
Visit Our Web Site
Stop by www.sprintpcs.com to get up-to-date information on PCS
Services, options, and more.
You can also:
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Review coverage maps
Learn how to use voicemail
Access your account information
Purchase accessories
Add additional options to your service plan
Check out frequently asked questions
And more
PCS Customer Solutions
Claire, your virtual service representative is also available to assist you
logging on and clicking on Claire’s Directory for Service Solutions.
Section 1: Getting Started
1A: Setting Up Service
9
Receiving Automated Invoicing Information
For your convenience, your phone gives you free access to invoicing
information on your PCS Account. This information includes balance
due, payment received, invoicing cycle, and the amount of minutes used
since your last invoicing cycle. Follow these steps to access this
information:
L
Press
Note: This service may not be available in all Affiliate markets.
PCS Directory Assistance
PCS Directory Assistance provides a variety of services, including
residential, business and government listings; assistance with local or
long-distance calls; movie listings; hotel, restaurant and shopping
information, and major local event information. There is a per-call
charge and you will be billed for airtime.
L
Press
.
PCS Operator Services
PCS Operator Services can provide assistance in placing collect calls or
calls billed to a local telephone calling card or to a third party.
L
Press
.
For more information, or to see the latest in products and services, visit
Note: PCS Operator Services may not be available in all
Affiliate markets.
Section 1: Getting Started
10 1A: Setting Up Service
12
Section 2A
Your PCS Phone: The Basics
In This Section
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Front View of Your Phone
Viewing the Display Screen
Features of Your Nokia 3585 Phone
Switching Your Phone On and Off
Using the Battery and Charger
Displaying Your Phone Number
Making and Answering Calls
our PCS Phone is packed with features that simplify your life and
expand your ability to stay connected to the people and information
that are important to you. This section will guide you through the basics of
your phone and you’ll be on your way to using it in no time.
Section 2: Understanding Your Phone
2A: Your PCS Phone # The Basics 13
Front View of Your Phone
1. Switch On/Off Button
15. Whip Antenna
14. Earpiece
2. Universal
Head Jack
3. Display Screen
4. Signal Indicator
13. Battery Strength
Indicator
5. Left/Right Selection Keys
6. Four-way
Navigation keys
7. Talk Key
12. End Call Key
8. Speaker Port
9. AC Adapter Plug
11. Nokia Pop-Port™
10. Microphone
Section 2: Understanding Your Phone
14 2A: Your PCS Phone # The Basics
1. Switch On/Off Button: Button located at the top of your phone that
switches your phone On or Off.
2. Universal Headset Jack: Provides connection for a headset and a TTY
device.
3. Display Screen: Large, high-resolution grey-scale display screen with
bright white backlighting allows you to easily read text and images.
4. Signal Indicator: Indicates signal strength.
5. Left/Right Selection Keys: Lets you select various prompts that appear
on the display screen above these keys.
6. Four-way Navigation keys: Lets you four-way scroll through menu
screens, highlight menu items, navigate through your calendar, and
read notifications in your inbox.
7. Talk Key: Dials outgoing calls and answers incoming calls.
8. Speaker Port: Lets you hear phone tones and ringing tones.
9. AC Adapter Plug: Connects phone to battery recharger.
10. Microphone: Transmits voice.
11. Nokia Pop-Port™ Accessory Connector: Provides connection to a car
kit and other accessories.
12. End Call Key: Ends calls and clears text from display screen.
13. Battery Strength Indicator: Indicates battery strength.
14. Earpiece: Allows you to listen to voice and prompts.
15. Whip Antenna: Extendable antenna increases reception in weak-
signal areas.
Section 2: Understanding Your Phone
2A: Your PCS Phone # The Basics 15
Viewing the Display Screen
This list identifies the symbols you’ll see on your display screen.
ᮣ
shows your current signal strength.
The more lines you have, the stronger your signal.
No service means your phone cannot find a signal.
tells you a call is in progress.
indicates you are roaming off the Sprint Nationwide PCS
Network.
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
indicates you have voicemail messages waiting. Press and hold
to call your voicemail box.
indicates that your phone’s ringing tones or warning tones have
been silenced.
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
indicates that your Vibrating alert is activated.
indicates that Keyguard is activated.
indicates that the Alarm is set.
indicates that a headset is connected.
indicates that the phone is in a hands-free car kit.
indicates that Predictive text mode is activated.
Tip: Display indicators let you know when you’re off the Sprint Nationwide
PCS Network and whether you’re operating in digital or analog mode.
Section 2: Understanding Your Phone
16 2A: Your PCS Phone # The Basics
Features of Your Nokia 3585 Phone
is lightweight, easy-to-use, reliable, and offers many significant features
and service options:
ᮣ
Tri-mode capability provides access to other PCS digital and
analog networks where Sprint has implemented roaming
agreements.
ᮣ
PCS Voice CommandSM lets you dial phone numbers by speaking
someone’s name or the digits in their phone number (page 91).
Caller Identification (page 83).
ᮣ
ᮣ
Internal phone vibration silently alerts you of incoming calls
(page 27).
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Large, high-resolution grey-scale display screen with bright white
backlighting allows you to easily read text and images (page 14).
Recorder allows you to record and store up to 60 seconds of personal
notes to yourself (page 75).
New keypad design with large fonts and bright white backlighting for
easy location of keys under any lighting conditions (page 14).
Easy to operate keypad featuring Nokia’s 4-way scroll keys
(page 14).
Space for up to 500 Internal Phone Book entries with support for
multiple numbers and addresses in each entry (page 68).
PCS Tones & MoreSM provides 30 installed enhanced musical ringing
and game tones, and memory to download more (page 88).
Switching Your Phone On and Off
Switching Your Phone On
To switch your phone On, press the power button ( ) on top off your
phone for approximately two seconds.
Once your phone is On, it displays “Searching for Service” indicating
that your phone is searching for a signal. When your phone finds a
signal, it automatically enters Standby mode—the phone’s idle state. At
this point, you are ready to begin making and receiving calls, and
viewing your phone’s many different menus.
Section 2: Understanding Your Phone
2A: Your PCS Phone # The Basics 17
If your phone is unable to find a signal after 15 minutes of searching, a
Power Save feature is automatically activated. When a signal is found,
your phone automatically returns to Standby mode.
In Power Save mode, your phone searches for a signal periodically
without your intervention. You can also initiate a search for
PCS Service by pressing any key (when your phone is switched On).
Note: The Power Save feature helps to conserve your battery power when
you are in an area where there is no signal.
Switching Your Phone Off
Press for two seconds until you see “Goodbye!” on the display screen.
Your screen remains blank while your phone is Off (unless you are
charging the battery).
Using the Battery and Charger
Battery Capacity
Your PCS Phone is equipped with a Lithium Ion (Li-Ion) battery that is
rechargeable. The battery provides approximately 2.8 hours of
continuous digital talk time (up to one hour in analog mode) or
approximately 235 hours (almost 10 days) of continuous digital standby
time (up to one day in analog mode).
When the battery charge is getting low, the “Battery low. Please
recharge.” message is displayed on your screen, and the phone sounds a
warning tone. When the battery has become too weak to further operate
the phone, the message “Switching off. Please recharge.” is displayed on
your screen.
Note: Backlighting, searching for service, and vibrate mode use reduce
the battery’s talk and standby times.
Tip: Be sure to charge your phone’s battery, and watch your indicator to
ensure your levels are okay.
Section 2: Understanding Your Phone
18 2A: Your PCS Phone # The Basics
Installing the Battery
To install or replace the battery, or to access your phone’s ESN (electronic
serial number), you must first remove the phone’s back cover. To do so,
press the release button, press your thumb against the thumb grip, and
slide the entire back cover up and over the whip antenna.
Tip: Always make sure the power is off before removing the phone cover
Your PCS Phone comes with a Li-Ion battery. Follow these steps to
install it:
1. Insert the battery at a 45-degree angle with the label side facing up
into the cavity on the back of the phone. The metal contacts must be
aligned with and connected to the metal prongs.
2. Press down on the battery until it snaps into place.
Removing the Battery
To remove your battery, follow these easy steps:
1. Make sure the power is off so that you don’t lose any stored numbers
or messages.
2. Remove the back cover by pressing and holding the release button
and sliding the entire back cover up and over the whip antenna.
3. Pull upward on the lower end of the battery with your finger tip and
remove the battery from the phone at a 45-degree angle.
Section 2: Understanding Your Phone
2A: Your PCS Phone # The Basics 19
Charging the Battery
Your PCS Phone comes with a rechargeable battery. You should charge
the battery as soon as possible so you can begin using your phone.
Use only a Sprint/Nokia approved desktop charger, travel charger, or
vehicle power adapter to charge your battery.
Keeping track of your battery’s charge is important.
If your battery level becomes too low, your phone
automatically turns Off and you’ll lose everything
you were just working on and/or be disconnected
from an active call. For a quick check of your
battery’s strength level, glance at the battery strength
indicator located in the upper-right corner of your
phone’s display screen.
Warning! Using unauthorized accessories could cause damage to your
phone and invalidate your warranty.
Using the Charger
To use the charger:
1. Plug the cord of the AC adapter into the electrical wall outlet, then
plug the round end into the desk stand charger (or directly into your
phone’s AC adapter plug).
2. Place the phone in the desk stand charger. The screen briefly displays
a “Charging” notification (if the phone is On), followed
immediately by a continuous scrolling battery indicator. If the phone
is Off, only the scrolling indicator is displayed.
3. When the battery is fully charged, the screen displays a “Battery full”
notification, and the indicator stops scrolling. Unplug the phone
from the charger.
You can recharge the Li-Ion battery before it becomes completely run
down. A completely empty battery takes approximately 4 hours to fully
recharge.
20
Holding Your Phone Properly
Hold your phone by placing your index finger on the
finger grip on the back cover. This facilitates optimal
reception by preventing your hand from obstructing
the internal antenna.
Displaying Your Phone Number
Just in case you forget your phone number, your PCS Phone can
remind you.
To display your phone number:
1. Press Menu, scroll to Phone details, and press Select.
2. Scroll to Own number and press Select. Your phone’s number is
displayed.
3. Press
to return to Standby mode.
Making and Answering Calls
Making Calls
Your PCS Phone offers many different ways to make calls, including
direct dialing, PCS Voice CommandSM (page 91), One-touch Dialing,
from your Internal Phone Book, and from the Call logs menu.
To make a call by direct dialing:
1. Make sure your phone is On.
2. Enter a phone number. (If you make a mistake while dialing,
press Clear to delete one digit at a time, or press and hold Clear to
delete the entire number.
3. After entering your number, press
press
. When you’re finished,
or End Call.
Tip: To easily redial your most recently dialed number, press
twice.
Note: When making calls off the enhanced Sprint Nationwide PCS
Network, always dial using 11 digits (1 + area code + phone number).
Section 2: Understanding Your Phone
2A: Your PCS Phone # The Basics 21
1-Touch Dialing
1-touch dialing allows you to speed dial by simply pressing one
designated key and
. To use 1-touch dialing, you must first assign
a number to a particular key:
1. Press Names, scroll to 1-touch dialing, and press Select. Key
numbers 2–9 are displayed.
2. Scroll to the key number you wish to assign and press Assign.
3. Enter the number you wish to assign to this key, and press OK. If
1-touch dialing is not activated, your phone will ask you if you wish
to activate it now. Press Yes or No.
– or –
4. If the number already exists in your Internal Phone Book, press
Search to find it, and press Select.
To activate 1-touch dialing:
1. Press Menu, scroll to Settings, and press Select.
2. Scroll to Call settings and press Select.
3. Scroll to 1-touch dialing and press Select.
4. Highlight On and press Select.
To make a call using 1-touch dialing:
L
Press the key assigned to the number you wish to dial, and
press , or press and hold the assigned key for 2 seconds.
Voice Dialing
You can also make calls by voice-activated commands. (See "Voice-
Activated Dialing" on page 74.)
Answering Calls
1. Make sure your phone is On. If your phone is Off, incoming calls go
to voicemail.
2. When a call comes in, answer the call by pressing
. Depending
on your settings, your PCS Phone notifies you of incoming calls in
the following ways:
ᮣ
ᮣ
ᮣ
The phone rings and/or vibrates.
The backlight illuminates.
The screen displays an incoming call message.
Section 2: Understanding Your Phone
22 2A: Your PCS Phone # The Basics
ᮣ
ᮣ
If available, the phone number of the caller is displayed.
If the phone number is in your Internal Phone Book, the entry’s
name is displayed.
The following options are also available.
1. Press Answer to answer the call.
2. Press Silence or
to mute the ringing tone. If you do not
answer the call, it will be forwarded to your voicemail.
Depending on your settings, you may also answer incoming calls simply
by pressing any number key. (To answer a call when you are roaming
and Call Guard is enabled, you must press OK to answer the call.
(See “Controlling Roaming Charges Using Call Guard” on page 40.)
Note: If your phone is Off, incoming calls go to voicemail.
3. To disconnect the call, press
or End call.
Missed Call Notification
When the phone is turned on, and an incoming call is not answered, the
“Missed call” message is displayed on your screen.
To display the missed call:
L
Press List.
To dial the phone number after viewing it:
Press
L
.
Note: The “Missed call” message may not be displayed when roaming out of
network.
Calling Emergency Numbers
Your can place calls to 911, press
, then press
(even if your phone is locked or your account is restricted).
Dialing Options
Dialing options are available when you enter numbers in the Standby
mode.
L
To select an option, press Options, then press:
Section 2: Understanding Your Phone
2A: Your PCS Phone # The Basics 23
ᮣ
ᮣ
ᮣ
Save to save the phone number in your Internal Phone Book.
(See “Saving a Phone Number” on page 58.)
Add to name to add the number to an existing name in your
Internal Phone Book.
Call to dial the phone number. If you are roaming and have the Call
Guard feature activated, select OK. (See “To Turn the Call Guard
Feature On and Off” on page 40.)
In-Call Options
During a call, your phone displays menu options in addition to the
main menu.
To select an option, press Options, then scroll to your desired option and
press:
ᮣ
Mute to mute your phone’s microphone.
Unmute to reactivate the microphone if you had earlier
muted your phone.
ᮣ
ᮣ
ᮣ
Three-way call to call a third party.
End all calls to end all calls.
ᮣ
ᮣ
Touch tones to send a touch-tone string during a call.
My phone no. to display your number. This option is only available
during emergency (911) calls.
ᮣ
ᮣ
Names to open your Internal Phone Book menu options.
Menu to view options from your main menu.
End-of-Call Options
After making or receiving a call, the phone number you called or
received is temporarily saved in your Call logs menu. To view your
number and options:
1. Press Menu, scroll to Call logs, and press Select.
2. Scroll to Outgoing calls, Incoming calls, or Missed calls and press
Select. The most recent number your called appears at the top of the
list.
3. Press Options, scroll to your preferred option, and press Select.
After receiving a call from or making a call to a phone number that is in
your Internal Phone Book, the entry name, phone number, and the
duration of the call are displayed.
Section 2: Understanding Your Phone
24 2A: Your PCS Phone # The Basics
Section 2B
Controlling Your Phone’s Settings
In This Section
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Customizing Profiles
Selecting Profiles
Silent Mode
Adjusting Volume Settings
Ringing Tones
Customizing Ringing Options and Tones for Voice Calls
Selecting Ringing Tones for Messages
Alert Notification
Customizing the Welcome Note
Customizing the Display Banner
Adjusting the Screen Brightness
his section describes how you can change your phone’s settings to best
suit your requirements. Take a few moments to review these options
and add or adjust the settings that are right for you.
T
Your phone has five adjustable profiles, including Normal, Silent, Meeting,
Outdoor, and Pager. Which profile you select and how you have adjusted
each profile will determine the characteristics of your phone when you are in
that particular profile. Note, as well, that the menu structure and associated
options are identical for all five profiles, with the only exception being that
you cannot rename your Normal profile.
Section 2: Understanding Your Phone
2B: Controlling Your Phone’s Settings 25
Customizing Profiles
Your phone has five different profiles. Each profile can be customized to
your specifications. For example, you may wish to customize your Meeting
profile to accommodate your needs for taking calls during meetings.
To customize your Meeting profile:
1. Press Menu, scroll to Profiles, and press Select.
2. Scroll to Meeting and press Select.
3. Scroll to Customize and press Select.
4. Scroll through each option and make adjustments as desired.
5. Press Back, then press Exit.
Selecting a Profile
At any given time, you can select one of five phone profiles to suit your
immediate situation.
For example, to set your phone to Meeting profile:
1. Press Menu, scroll to Profiles, and press Select.
2. Scroll to Meeting and press Select, then press Select again.
Until you select a different profile, your phone will remain in Meeting
profile, and your phone’s characteristics will reflect this profile.
Silent Mode
There may be times when you need to silence your phone entirely without
turning your phone Off. The most efficient way to do this is to select your
Silent profile. You may, however, modify the settings to your specifications.
To modify and select your Silent profile:
1. Press Menu, scroll to Profiles, and press Select.
2. Scroll to Silent and press Select.
3. Scroll to Customize and press Select.
4. Scroll to Ringing options and press Select.
5. Scroll to Silent and press Select.
Tip: You can also activate the vibrating alert, and disable warning, alert,
and keypad tones.
Section 2: Understanding Your Phone
26 2B: Controlling Your Phone’s Settings
Adjusting Volume Settings
To adjust the ringing volume setting:
1. Press Menu.
2. Scroll to Profiles and press Select.
3. Scroll to the profile you wish to modify (Normal is the default) and
press Select.
4. Scroll to Customize and press Select.
5. Scroll to Ringing volume and press Select.
6. Scroll to your preferred level (Level 1–Level 5) and press Select.
Tip: You can adjust the earpiece volume during a call by using the right/left
scroll keys.
Ringing Tones
Ringing tones help you identify incoming calls and messages. You can
assign ringing tones to individual Internal Phone Book entries, types of
calls, and types of messages.
ᮣ
Pre-programmed ringing tones include a variety of standard
ringing tones and familiar music.
ᮣ
Vibrating alert silently alerts you to calls or messages.
Customizing Ringing Tones
To customize your ringing tones for any of your phone’s profiles:
1. Press Menu, scroll to Profiles, and press Select.
2. Scroll to the profile you wish to modify (Normal, Silent, etc.) and
press Select.
3. Scroll to Customize, and press Select.
4. Scroll to Ringing options and press Select.
5. Scroll to your preferred option and press Select.
6. Scroll to Ringing tone and press Select.
7. Scroll to your preferred tone and press Select.
Section 2: Understanding Your Phone
2B: Controlling Your Phone’s Settings 27
Selecting Ringing Tones for Messages
To select a ringing tone for messages:
1. Press Menu, scroll to Profiles, and press Select.
2. Scroll to the profile you wish to modify (Normal, Silent, etc.) and
press Select.
3. Scroll to Customize and press Select.
4. Scroll to Message alert tone and press Select.
5. Scroll to the preferred tone or option, and press Select.
Alert Notification
To select a ringing alert that allows you to identify the type of call:
1. Press Menu, scroll to Profiles, and press Select.
2. Scroll to the profile you wish to modify (Normal, Silent, etc.) and
press Select.
3. Scroll to Customize and press Select.
4. Scroll to Alert for and press Select.
5. Scroll to the group(s) you wish to select and press Mark, then press
Done.
To disable alert sounds:
1. Press Menu, scroll to Profiles, and press Select.
2. Scroll to the profile you which to modify (Normal, Silent, etc.) and
press Select.
3. Scroll to Customize and press Select.
4. Scroll to Alert for and press Select.
5. Scroll to each category that has been marked and press Unmark, then
press Done.
Note: Selecting the Silent profiles does not disable game sounds. Game
sounds must be switched Off from the Games’ Settings options
Section 2: Understanding Your Phone
28 2B: Controlling Your Phone’s Settings
Customizing the Welcome Note
Your new PCS Phone offers options for what you see on the display screen
while switching On.
To change your welcome note:
1. Press Menu, scroll to Settings, and press Select.
2. Scroll to Welcome note and press Select.
3. Key in your welcome note (up to 45 characters) and press Select.
Now, each time you switch On your phone, you will momentarily see
your personalized welcome note!
Customizing the Display Banner
The screen banner is displayed on your phone’s Standby screen.
To change your display banner:
1. Press Menu, scroll to Settings, and press Select.
2. Scroll to Phone settings and press Select.
3. Scroll to Display options and press Select.
4. Scroll to Banner and press Select.
5. Scroll to Customize and press Select.
6. Key in your banner message (up to 20 characters) and press Select.
Now, whenever your phone is in Standby mode, you will see your
personalized banner!
Adjusting the Screen Brightness
To adjust the screen brightness:
1. Press Menu, scroll to Settings, and press Select.
2. Scroll to Phone settings and press Select.
3. Scroll to Display options and press Select.
4. Scroll to Display brightness, adjust the brightness by pressing the
up/down scroll keys, then press Select.
Section 2: Understanding Your Phone
2B: Controlling Your Phone’s Settings 29
Section 2: Understanding Your Phone
30 2B: Controlling Your Phone’s Settings
Section 2C
Setting Your Phone’s Security
In This Section
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Accessing the Security Menu
Locking Your Phone
Unlocking Your Phone
Changing the Lock Code
Calling in Locked Mode
Locking and Unlocking Your Keypad
Restricting Calls
Removing Restrictions to Calls
Using Special Numbers
Restoring Factory Settings
y using the security setting on your PCS Phone, you receive peace of
mind without sacrificing flexibility. With several options available, you
can customize your phone to meet your personal needs.
B
Section 2: Understanding Your Phone
2C: Setting Your Phone’s Security 31
Accessing the Security Menu
You must enter your security code to view the Security menu.
To access the Security menu:
1. Press Menu, scroll to Settings, and press Select.
2. Scroll to Security settings and press Select.
3. Enter your security code and press Select.
Tip: If you can’t recall your security code, try using the last four digits of either
your Social Security number or PCS Phone Number or try 1234. If none of these
work, call PCS Customer Solutions at 1-888-211-4PCS (4727).
Locking Your Phone
When your phone is locked, you can only receive incoming calls or make
outgoing calls to 911, PCS Customer Solutions, or numbers that you
have designated.
To lock your phone:
1. Press Menu, scroll to Settings, and press Select.
2. Scroll to Security settings and press Select.
3. Enter your security code and press OK.
4. Scroll to Phone lock and press Select.
5. Scroll to your preferred setting (Off, On, On power-up), and press
Select. A brief message confirming your selection is displayed on the
screen.
Unlocking Your Phone
To unlock your phone:
1. From the Security settings menu, scroll to Phone lock and press
Select.
2. Scroll to Off and press Select.
Changing the Lock Code
To change your lock code (which we recommend):
1. From the Security settings menu, scroll to Change lock code and
press Select.
Section 2: Understanding Your Phone
32 2C: Setting Your Phone’s Security
2. Enter your new lock code and press OK. You will be asked to verify
your new lock code.
3. Re-enter your new lock code and press OK.
Calling in Locked Mode
You can call 911, PCS Customer Solutions, and designated numbers
when in lock mode.
To place these types of outgoing calls in lock mode:
L
Enter the number and press
are dialing until you press
. You will not see the number you
.
Note: You will not see the number you have entered until you press the talk key.
Note: There are no speed dial options associated with special numbers.
Locking and Unlocking Your Keypad
To prevent pressing keys inadvertently, you can easily lock and unlock
the keypad. This, however, is not a security feature. You do not need a
lock code to lock and unlock your keypad.
To lock and unlock your keypad:
ᮣ
Press
.
Depending on which mode your phone is in, Lock or Unlock will appear
over the left selection key.
Restricting Calls
You can restrict phone numbers that you can dial or from which you can
receive calls. (The Restrict Calls setting does not apply to 911 or
PCS Customer Solutions.)
To restrict calls:
1. Press Menu, scroll to Settings, and press Select.
2. Scroll to Security settings and press Select.
3. Enter your security code and press OK.
4. Scroll to Restrict incoming calls and press Select.
Section 2: Understanding Your Phone
2C: Setting Your Phone’s Security 33
5. To restrict all calls, scroll to Select, press Select, press Mark, press
Done, and press Yes to save changes.
6. To restrict particular calls, scroll to Add restriction, press Select, then
either enter the number you wish to restrict, or press Search to scroll
your Internal Phone Book.
7. Press OK.
Note: Restricted incoming calls are forwarded to voicemail.
Removing Restrictions to Calls
To remove restrictions to all calls:
1. Press Menu, scroll to Settings, and press Select.
2. Scroll to Security settings and press Select.
3. Enter your security code and press OK.
4. Scroll to Restrict incoming calls and press Select.
5. Scroll to Select, press Select, press Unmark, press Done, and press
Yes to save changes.
Using Allowed Numbers When Phone is
Locked
You can assign numbers, either entered manually or from your Internal
Phone Book, that you can call and receive even when your phone is
locked.
To assign a number:
1. Press Menu, scroll to Settings, and press Select.
2. Scroll to Security settings and press Select.
3. Enter your security code and press OK.
4. Scroll to Allowed numbers when phone is locked and
press Select.
5. Press Assign, enter the number you wish to allow, and press OK.
– or –
6. Press Assign, then press Find to access your Internal Phone Book.
Scroll to find the number you wish to allow and press OK, Select, and
OK once more.
Section 2: Understanding Your Phone
34 2C: Setting Your Phone’s Security
Restoring Factory Settings
Restoring all the factory defaults include the standard ringing tones and
display settings. The Internal Phone Book (Names), Call Log, Organizer
and Messaging settings are not affected.
To restore your phone’s factory settings:
1. Press Menu, scroll to Settings, and press Select.
2. Scroll to Phone settings and press Select.
3. Scroll to Restore factory settings and press Select.
4. Enter your security code and press OK.
Section 2: Understanding Your Phone
2C: Setting Your Phone’s Security 35
Section 2: Understanding Your Phone
36 2C: Setting Your Phone’s Security
Section 2D
Controlling Your Roaming
Experience
In This Section
ᮣ
ᮣ
ᮣ
Understanding Roaming
Setting Your Phone’s Roaming Mode
Controlling Roaming Charges Using Call Guard
oaming is the ability to make or receive calls while you’re off the
R
Sprint Nationwide PCS Network. Your new dual band/ tri-mode PCS
Phone works anywhere on the Sprint Nationwide PCS Network and allows
you to roam on analog and digital networks virtually anywhere in the U.S.
where compatible wireless service is available.
This section explains how roaming works and explores special features that
let you manage your roaming experience.
Section 2: Understanding Your Phone
2D: Controlling Your Roaming Experience 37
Understanding Roaming
Roaming Indicator on the Display Screen
The roaming indicator ( )on your display screen lets you know when
you’re off the Sprint Nationwide PCS Network. You can set your roaming
mode to Spint only, analog only, or automatic, which then allows your
phone to automatically select the roaming mode when Sprint service is
not available.
Tip: Remember, when you are using your phone off the Sprint Nationwide PCS
Network, always dial numbers using 11 digits (1 + area code + number).
Note: You will pay a higher per-minute rate for roaming calls.
Roaming on Other Digital Networks
When you’re roaming on other digital networks, your call quality and
security will be similar to the quality you receive when making calls
while on the Sprint Nationwide PCS Network. You may not be able to
access certain calling features, such as PSC Voice Command or call
waiting.
Roaming on Analog Networks
When you roam on analog networks, you will experience a similar
quality provided by other analog carriers today. Although some calling
features will be unavailable, you can still make and receive calls and
access voicemail. You will experience a few differences:
ᮣ
You are more likely to experience static, cross-talk, fade-out and
dropped calls.
ᮣ
Some calling features that are standard on the enhanced Sprint
Nationwide PCS Network, such as call waiting, and direct
international dialing, are unavailable.
ᮣ
Though callers can leave voicemail messages while you are
roaming, you will not receive notification until you return to the
Sprint Nationwide PCS Network. While roaming, you should
periodically check your voicemail box for new messages by dialing
Section 2: Understanding Your Phone
38 2D: Controlling Your Roaming Experience
1+area code+PCS Phone Number. Press
when you hear your
greeting and enter your pass code at the prompt.
There are security and privacy risks (eavesdropping and cloning)
that exist with conventional analog services today.
Your battery needs recharging sooner when you use your phone for
analog roaming.
ᮣ
ᮣ
Note: If you’re on a call when you leave the Sprint Nationwide PCS
Network and enter an area where roaming is available (whether digital or
analog), your call is dropped. If your call is dropped in an area where you
think PCS Service is available, turn your phone Off and On again to
reconnect to the Sprint Nationwide PCS Network.
Note: When using your phone in analog mode, the handset may feel warm.
This behavior is normal for analog operation.
Setting Your Phone’s Roaming Mode
Your PCS Phone allows you to control your ability to roam. By using the
system menu’s roaming options, you determine which signals your
phone accepts.
Set Mode
Choose from three different settings on your tri-mode phone to control
your roaming experience:
1. Press Menu, scroll to Settings, and press Select.
2. Scroll to Roaming and press Select.
3. Scroll to Set mode and press Select.
4. Scroll to your preferred mode and press Select.
ᮣ
ᮣ
ᮣ
Sprint: Lets you make and receive calls only on the Sprint
Nationwide PCS Network and prevents roaming.
Automatic: Searches for alternative wireless networks when PCS
Service is not available.
Analog only: After activating Analog only, your phone operates in
analog mode until you switch Off the phone. The phone defaults to
Automatic mode when switched On.
Section 2: Understanding Your Phone
2D: Controlling Your Roaming Experience 39
Controlling Roaming Charges Using
Call Guard
In addition to the roaming icon, Call Guard alerts you when roaming
charges apply. This feature makes it easy to manage your roaming
charges by reminding you when you make or receive roaming calls. It
also requires you to take additional steps before placing or answering a
roaming call. These additional steps are not required when you make or
receive calls while on the Sprint Nationwide PCS Network.
To Turn the Call Guard Feature On or Off:
1. Press Menu, scroll to Settings, and press Select.
2. Scroll to Roaming and press Select.
3. Scroll to Call Guard and press Select.
4. Highlight On or Off and press Select.
To Place Roaming Calls with Call Guard On:
1. Press Menu, scroll to Settings, and press Select.
2. Scroll to Roaming and press Select.
3. Scroll to Set mode and press Select.
4. Highlight Automatic and press Select. A message asking you to
confirm your choice will appear on the display screen.
5. Press OK to activate the mode you have chosen. Now, if you make
calls outside the Sprint service area, your phone will automatically
roam to a nearest service provider.
To Answer Incoming Roaming Calls With Call Guard On:
ᮣ
Press Menu, scroll to Answer, and press Select.
Remember if the Call Guard feature is set to On, you need to take extra
steps to make and receive roaming calls even if you have selected the
Analog setting.
Section 2: Understanding Your Phone
40 2D: Controlling Your Roaming Experience
Section 2E
Navigating Through Menus
In This Section
ᮣ
ᮣ
ᮣ
ᮣ
Menu Navigation
Menu Structure
Reviewing Main Menu
Reviewing Names Menu
his section is a road map to using your PCS Phone. Every function and
feature can be accessed through a menu. Take a few moments to learn
your way around. You’ll find that it makes your phone easier to use.
Section 2: Understanding Your Phone
2E: Navigating Through Menus 41
Menu Navigation
The four-way navigation keys on your PCS Phone allow you to scroll
through menus quickly and easily.
To navigate through a menu, simply press a navigation key in the
direction you wish to move.
Menu Structure
Selecting Menu Items
As you navigate through a menu, the options are displayed on your
screen. Select an option by scrolling to it and pressing Select.
For example, if you want to view your last incoming call:
1. From the Standby mode, press Menu, scroll to Call logs, and press
Select.
2. Press the up or down navigation key to display Incoming Calls, and
press Select. Received calls are displayed on the screen in the order
they were received, with the most recent being at the top of the list.
Backing Up Within a Menu
To go to previous screens already displayed:
ᮣ
Press Back.
To return to the Standby mode:
Press Exit or
ᮣ
.
Reviewing Main Menu
Menu Main Diagram
Menus let you view or change your phone settings. The following outline
shows your phone’s complete menu structure:
Call logs
Messaging
Organizer
Profiles
Phone details
Games
Keyguard
Settings
Section 2: Understanding Your Phone
42 2E: Navigating Through Menus
Here are your Main Menus and their associated sub-menus:
Call logs
Outgoing calls
Call time
View number
Use number
Save
Add to name
Delete
Call
Incoming
Missed calls
Delete logs
All
Missed
Incoming
Dialed
Messaging
Notifications
Inbox
Delete
Save message
Use number
Save address
Forward
Rename
Archive
My folders
Delete notifications
All read
Inbox
Archive
Notification settings
Notification font size
Small font
Large font
Overwrite notifications
Off
Inbox only
Voicemail
Call voicemail
Clear count
Voice mailbox
Organizer
Alarm clock
Select
On
Off
Calendar
Section 2: Understanding Your Phone
2E: Navigating Through Menus 43
Options
View day
View notes
Edit
Delete
Move
Repeat
Copy
Make a note
Meeting
No alarm
Silent
At event time
5 min before
10 min before
15 min before
30 min before
Other
With tone
At event time
5 min. before
10 min. before
15 min. before
30 min. before
Other
Call
Birthday
Memo
Reminder
Note: Call, Birthday, Memo, and Reminder have the same submenus as
Meeting.
Delete
Edit
Move
Repeat
Never
Every day
Every week
Every 2 weeks
Every month
Every year
Go to date
OK
Back
Settings
Set the date
Set the time
Date format
Date separator
Time format
Week starts
Section 2: Understanding Your Phone
44 2E: Navigating Through Menus
Auto delete
Voice recorder
Record
Stop
Recordings list
Playback
Edit title
Delete
Alarm/Add alarm
Calculator
Equals
Add
Subtract
Multiply
Divide
Square
Square root
Change sign
Stopwatch
Continue
Show last
Split timing
Start
Save
Reset
Lap timing
Start
Save
Reset
View times
Delete times
Delete times
One by one
All at once
Profiles
Normal
Select
Customize
Ringing options
Ringing
Ascending
Ring once
Beep once
Silent
Ringing tone
Type 1
Type 2
Personal Ringing Tone
Ringing volume
Level 1
Level 2
Level 3
Level 4
Section 2: Understanding Your Phone
2E: Navigating Through Menus 45
Level 5
Vibrating alert
On
Off
Message alert tone
Option
Off
No tone
Long and loud
Standard
Special
Beep once
Ascending
Personal
Keypad tones
Off
Level 1
Level 2
Level 3
Warning tones
On
Off
Alert for
All calls alert
Family
VIP
Friends
Business
Other
Profile name
Remove
Add new
Timed
Silent (Note: The following Profile menus have identical sub-menus.)l
Meeting
Outdoor
Pager
Settings
Voice commands
Profiles
Normal
Add command
Silent
Add command
Meeting
Add command
Outdoor
Add command
Pager
Add command
Voice mailbox
Add command
Playback
46
Change
Delete
Voice recorder
Add command
Playback
Change
Delete
Call log
Add command
Playback
Change
Delete
Call settings
Anykey answer
On
Off
Automatic redial
On
Off
1-touch dialing
On
Off
Automatic update of service
On
Off
Calling card
None
Card A
Select
Edit
Delete
Card B
Select
Edit
Delete
Card C
Select
Edit
Delete
Card D
Select
Edit
Delete
Phone settings
Language
English
Español
Touch tones
Manual\Touch tones
Continuous
Fixed
Off
Touch tone length
Short
Long
Section 2: Understanding Your Phone
2E: Navigating Through Menus 47
Welcome note
Help text activation
On
Off
Display options
Display brightness
Banner
Default
Customize
Time settings
Clock
Hide clock/Show clock
Set the time
Time format
24-hour
am/pm
Date
Hide date/Show date
Set the date
Date format
Auto update of date & time
On
Confirm first
Off
Tone settings
Ringing options
Ringing
Ascending
Ring once
Beep once
Silent
Ringing tone
Type 1
Type 2
Personal Ringing Tone
Ringing volume
Level 1
Level 2
Level 3
Level 4
Level 5
Vibrating alert
On
Off
Message alert tone
Off
Standard
Special
Beep once
Ascending
Personal
Keypad tones
Off
Level 1
Level 2
Section 2: Understanding Your Phone
48 2E: Navigating Through Menus
Level 3
Warning tones
On
Off
Exclusive caller groups
All calls alert
Family
VIP
Friends
Business
Other
Accessory settings
Handsfree
Accessory profile
Active profile
General
Silent
Meeting
Outdoor
Pager
Automatic answer
Automatic answer on
Automatic answer off
Lights
On
Automatic
Headset
Accessory profile
Active profile
General
Silent
Meeting
Outdoor
Pager
Automatic answer
Automatic answer on
Automatic answer off
Loopset
Use loopset
Yes
No
Accessory profile
Active profile
General
Silent
Meeting
Outdoor
Pager
Automatic answer
Automatic answer on
Automatic answer off
Security settings
Phone lock
Off
On
Section 2: Understanding Your Phone
2E: Navigating Through Menus 49
On power-up
Allowed phone numbers when locked
Change security code
Call restrictions
Restrict outgoing calls
Restrict incoming calls
Select
All calls
Mark/Unmark
Back
Add restriction
Edit
Delete
Roaming
Set mode
Sprint
Automatic
Analog only
Call guard
On
Off
Roaming ring tone
On
Off
Service Alert tones
On
Off
Network services
Voice privacy
On
Off
Call forwarding
Forward all calls
Activate
Cancel
Forward if busy
Activate
Cancel
Forward calls if not answered
Activate
Cancel
Forward calls if out of reach
Activate
Cancel
Cancel all call forwarding
Call waiting
Activate
Cancel
Send own caller ID when calling
Yes
No
Network feature setting
Section 2: Understanding Your Phone
50 2E: Navigating Through Menus
Own number selection
Restore factory settings
Phone details
Own number
SW version
Games
Select game
Snake II
Kart Racing
Space Impact II
Bumper
Settings
Game sounds
On
Off
Game lights
On
Off
Shakes
On
Off
Reviewing the Internal Phone Book Menu
Internal Phone Book Menu Diagram
The Internal Phone Book menu contains your Internal Phone Book
entries, and lets you add, delete, and customize entries according to your
personal preferences.The following outline shows your phone’s complete
Phone Book menu structure:
Search
Options
Add new
Edit name
Delete
1-touch dialing
Voice tags
Own numbers
Caller groups
Add number
Names
Search
List
Details
Options
Back
Back
Back
Section 2: Understanding Your Phone
2E: Navigating Through Menus 51
Add new
Select
OK
OK
Back
Options
Add voice tag
Select
Start
Back
Back
Edit number
Select
OK
Clear
Back
Delete number
Select
OK
Back
Back
View
Select
Back
Back
Change type
Select
General
Select
Back
Mobile
Home
Work
Fax
Back
As Primary no.
Add number
Add detail
Caller groups
Custom tone
1-touch dialing
Edit name
View name
Delete
Done
Back
Exit
Edit name
Select
Edit
OK
Clear
Back
Delete
Select
Section 2: Understanding Your Phone
52 2E: Navigating Through Menus
One by one
Select
Back
Delete all
OK
Back
Exit
Add number
Select
Add
General
Select
Back
Mobile
Home
Work
Fax
Back
Exit
Options
Select
Scrolling view
Select
Name list
Select
Back
Name+number
Select
Back
Memory status
Select
Back
Back
Exit
1-touch dialing
Select
Assign
Search
Back
Back
Back
Voice tags
Select
Back
Exit
Own numbers
Select
Back
Exit
Caller Groups
Select
Family
Rename group
Group ringing tone
Group logo
Section 2: Understanding Your Phone
2E: Navigating Through Menus 53
On
Off
View
Group members
Remove name
Add name
VIP (Note: The following groups have identical sub-menus.)
Friends
Business
Other
Exit
Section 2: Understanding Your Phone
54 2E: Navigating Through Menus
Section 2F
Managing Call Logs
In This Section
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Viewing Call Logs
Call Logs Options
Making a Call From Call Logs
Viewing the Time of a Call From Call Logs
Viewing a Number From Call Logs
Using a Number From Call Logs
Saving a Number From Call Logs
Adding a Number to a Pre-existing
Name in Your Phone Book
ᮣ
Deleting a Number in Call Logs
he Call logs feature helps you manage your time more effectively. It
keeps track of incoming calls, calls made from your PCS Phone, and
missed calls. This section guides you through accessing and making the
most of your Call logs.
Section 2: Understanding Your Phone
2F: Managing Call History 55
Viewing Call Logs
You’ll find your Call logs invaluable. It is a list of the last 20 phone
numbers or Internal Phone Book entries for calls you placed, accepted or
missed. Call logs makes redialing a number fast and easy. It is
continually updated as new numbers are added to the beginning of the
list and the oldest entries are removed from the bottom of the list.
Each entry contains the phone number (if it is available) and Internal
Phone Book entry name (if the phone number is in your Internal Phone
Book). Duplicate calls (same number and type of call) may only appear
once on the list.
To view an entry in Call logs:
1. Press Menu.
2. Scroll to Call logs, and press Select.
3. Scroll to Outgoing calls, Incoming calls, Missed calls, or Delete
call logs, and press Select.
Depending on the calls made and received, numbers will be listed in
chronological order.
Call Logs Options
For additional information and options on a particular call, scroll to an
entry and press Select. This feature gives you the following options for
each number you select:
ᮣ
ᮣ
ᮣ
ᮣ
Call time
View number
Use number
Save
ᮣ
ᮣ
Add to name
Delete
ᮣ
Call
Section 2: Understanding Your Phone
56 2F: Managing Call History
Making a Call From Call Logs
To place a call from Call logs:
1. Press Menu, scroll to Call logs, and press Select.
2. Scroll to and option (for example, Missed calls) and press Select.
3. Scroll to the number you wish to call and press
.
Tip: You can view your list of dialed numbers by pressing
. Scroll to the
number you wish to dial and press
again.
Viewing the Time of a Call From Call Logs
To view the approximate time of a call:
1. Press Menu, scroll to Call logs, and press Select.
2. Scroll to the category you wish to view (for example, Outgoing calls),
and press Select.
3. Scroll to the number you wish to view, and press Select.
4. Scroll to Call time, and press Select.
Viewing a Number From Call Logs
To view a number:
1. Press Menu, scroll to Call logs, and press Select.
2. Scroll to the category you wish to view (for example, Outgoing
calls), and press Select.
3. Scroll to the number you wish to view, and press Select.
4. Scroll to View number, and press Select.
Using a Number From Call Logs
To use a number:
1. Press Menu, scroll to Call logs, and press Select.
2. Scroll to the category you wish to view (for example, Outgoing calls),
and press Select.
3. Scroll to the number you wish to use, and press Options.
4. Scroll to Use number, and press Select.
5. Press Options to save, add to a name, or call the number, then
press OK.
Section 2: Understanding Your Phone
2F: Managing Call History 57
Note: You cannot make calls from Call logs to entries identified as No ID or
Restricted. Calls labeled Data or Fax can only be dialed through a personal
computer.
Saving a Number From Call Logs
Your PCS Phone can store up to 500 Internal Phone Book contacts, with
a total of up to 2,500 phone numbers.
To save a phone number from Call logs:
1. Press Menu, scroll to Call logs, and press Select.
2. Scroll to the category you wish to view (for example, Outgoing calls),
and press Select.
3. Scroll to the number you wish to save, and press Options.
4. Scroll to Save, and press Select.
5. Scroll to the name you wish to assign to this number to and press OK.
After you have saved the number, the new Internal Phone Book entry is
displayed.
Note: You cannot save phone numbers already in your Internal Phone
Book or from calls identified as No ID or Restricted.
Adding a Number to a Pre-existing Name in
Your Phone Book
To add a phone number to a pre-existing name in your Phone Book:
1. Press Menu, scroll to Call logs, and press Select.
2. Scroll to the category you wish to use (for example, Outgoing calls),
and press Options.
3. Scroll to Add to name, and press Select.
4. Scroll to the name you wish to append, and press Add.
5. Scroll to the category to which you wish to add the number, and
press Select.
Section 2: Understanding Your Phone
58 2F: Managing Call History
Deleting a Number in Call Logs
To delete a number in Call logs:
1. Press Menu, scroll to Call logs, and press Select.
2. Scroll to Delete call logs and press Select.
3. Scroll to the option you prefer (All, Missed, Incoming, or Outgoing)
and press Select.
Note: This action cannot be undone.
Section 2: Understanding Your Phone
2F: Managing Call History 59
Section 2: Understanding Your Phone
60 2F: Managing Call History
Section 2G
Using the Internal Phone Book
In This Section
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Internal Phone Book Entry Options
Selecting a Character Input Mode In Phone Book
Adding a New Internal Phone Book Entry
Finding Internal Phone Book Entries
Adding a Phone Number to an Existing Internal Phone Book Entry
Editing an Internal Phone Book Entry’s Phone Number
Editing an Internal Phone Book Entry Name
Selecting a Ringing Tone for a Phone Book Entry
Dialing PCS Services
Deleting Your Phone’s Internal Phone Book
ow you know the basics that help make it easier to stay in touch with
people and information. This section helps you make the most of your
contacts and use your time more efficiently when you are trying to connect
with the important people in your life.
Section 2: Understanding Your Phone
2G: Using the Internal Phone Book 67
Internal Phone Book Entry Options
When you display an Internal Phone Book entry, the following options
are displayed. Press Names and scroll through your options.
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Search lets your search for an existing entry.
Add new lets you add a new entry.
Edit name lets you edit an existing entry.
Delete lets you delete an existing entry.
Add number lets you add a number to an existing entry.
Options lets you adjust how you wish to view your entries, and lets
you see how much memory you have available.
1-touch dialing lets you assign 1-touch speed dialing to an entry.
Voice tags lets you view which entries have been assigned a voice
tag for voice calling.
ᮣ
ᮣ
ᮣ
ᮣ
Own number lets you view your own phone’s number.
Caller groups lets you view the names of groups that you have
assigned to entries.
Selecting a Character Input Mode In Phone
Book
Your PCS Phone provides convenient ways to enter words, letters,
punctuation and numbers whenever you are prompted to enter text (for
example, when adding an Internal Phone Book entry).
ᮣ
to enter characters in the title-case mode.
to enter characters in the uppercase mode.
ᮣ
To change the character input mode in Internal Phone Book:
1. Press Names, scroll to an option, and press Select.
2. When you display a screen where you can enter text, press
alternate between title-case and all uppercase.
to
Note: The default text entry mode is title case (
of a new word is capitalized.
) where the first letter
Entering Characters by Tapping the Keypad
To enter characters by tapping the keypad, you must be in a display
screen that allows for text entry. Press the corresponding key until the
Section 2: Understanding Your Phone
68 2G: Using the Internal Phone Book
desired character appears. By default, the first letter of a word is
capitalized and following letters are lowercase.
Characters scroll in the following order:
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
. , @ ‘ ? ! - 1
A B C 2
D E F 3
G H I 4
J K L 5
M N O 6
P Q R S 7
T U V 8
W X Y Z 9
Space 0
Shift
(to create a new line)
After a character is entered, the cursor automatically advances to the
next space after two seconds or when you enter a character not on the
same key.
Entering Symbols and Numbers
To enter symbols:
1. Press
.
2. Using the four-way scroll keys, highlight a symbol and press Insert.
To enter numbers, repeatedly press the key to the corresponding number
you wish to enter until the number appears.
Tip: Press and hold the desired number key for 2 seconds to enter the number.
Adding a New Internal Phone Book Entry
Your PCS Phone can store up to 500 Internal Phone Book entries with up
to five phone numbers each.
To add a new entry:
1. Press Names, scroll to Add new, and press Select.
2. Enter the name of the new entry and press OK.
Section 2: Understanding Your Phone
2G: Using the Internal Phone Book 69
3. Enter the number of the new entry, press OK, then, either press
Options to modify this entry, or press Done.
Finding Internal Phone Book Entries
Follow the steps outlined in the sections below to display entries from the
Internal Phone Book menu.
Finding Names
To find an existing entry:
1. Press Names, scroll to Search, and press Select.
2. Enter the first letter(s) or the entire name of the entry you seek and
press Search.
– or –
Press List and scroll up or down to find the entry you seek.
Shortcut: From the main menu, press the up or down navigation key to
display your list of entries.
Note: Pressing the key that corresponds to the first letter of the desired entry,
and then pressing Search brings you to that alphabetical spot in the list of
entries. For example, pressing
four times, then pressing Search displays
the first Internal Phone Book entry beginning with the letter “S.”
Finding Speed Dial Numbers
To find phone numbers you have stored in speed dial locations:
1. Press Names, scroll to 1-touch dialing, and press Select.
2. Scroll up or down to view names.
Finding Voice Dial Numbers
To find phone numbers you have stored in Voice Dial:
1. Press names, scroll to Voice tags, and press Select
2. Scroll to the number you wish to view and press Select.
Adding a Phone Number to an Existing
Internal Phone Book Entry
To add a phone number to an entry:
Section 2: Understanding Your Phone
70 2G: Using the Internal Phone Book
1. Press Names, scroll to Add number, and press Select.
2. Scroll to the name you wish to modify and press Add no.
3. Scroll to the category to which you wish to add a number, and
press Select.
4. Enter the number and press OK.
5. Press Options to view options for further modifying this entry, or
press Done.
Editing an Internal Phone Book Entry’s
Phone Number
To edit a phone number:
1. Press the down scroll key to view your Internal Phone Book entries,
scroll to the entry you wish to modify, and press Details.
2. Scroll to the number you wish to modify and press Options.
3. Scroll to Edit number and press Select.
4. Press Clear to delete digits, or press and hold Clear to completely
delete the number.
5. Enter the new number, and press OK.
Editing an Internal Phone Book Entry Name
To edit the name of an entry:
1. Press the down scroll key to view your Internal Phone Book list
2. Scroll to the name you wish to edit and press Details.
3. Press Options, scroll to Edit name, and press Select.
4. Press Clear to delete letters, or press and hold Clear to completely
delete the name.
5. Enter the new name, and press OK.
Selecting a Ringing Tone for a Phone Book
Entry
You can assign a ringing tone to an Internal Phone Book entry so you
can identify the caller by the ringing tone.
To assign a ringing tone to an entry:
1. Display an Internal Phone Book entry, then press Details.
Section 2: Understanding Your Phone
2G: Using the Internal Phone Book 71
2. Press Options, scroll to Custom tones, and press Select.
3. Scroll to the tone you prefer, and press Select, then press
return to the Standby mode.
to
Dialing PCS Services
You must be in digital mode to access PCS Services.
To dial a service:
ᮣ
Press
.
Deleting Your Phone’s Internal Phone Book
There may be a need for you to completely delete your Internal Phone
Book. To do so:
1. Press Names, scroll to Delete, and press Select.
2. Scroll to Delete all, and press Select. A message will appear on your
display screen asking if you are sure you wish to delete your Phone
Book. If you are sure, press OK.
3. Enter your security code and press OK.
Note: This action cannot be undone
Section 2: Understanding Your Phone
72 2G: Using the Internal Phone Book
Section 2H
Personal Organizer and Games
In This Section
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Adding a Memo or Reminder to Your Calendar
Entering Characters Using T9 Text Input
Adding a Word to the T9 Database
Calendar Alerts
Event Alert Options
Viewing Events and Event Options
Deleting a Day’s Events
Going to Today’s Calendar Menu
Automatically Deleting Events
Using the Calculator
Playing Games
our PCS Phone has been equipped with several personal information
management features to help you manage your busy lifestyle. These
features turn your phone into a time management planner that helps you
keep up with your contacts, schedules and commitments. It takes
productivity to a whole new level.
Section 2: Understanding Your Phone
2H: Personal Organizer 61
Adding a Memo or Reminder to Your Calendar
Your Calendar helps organize your time by allowing you to give yourself
memos.
To add a memo:
1. Press Menu, scroll to Organizer, and press Select.
2. Scroll to Calendar and press Select.
3. Press
to scroll right to choose a day in which you wish to enter
a note, and press Options.
4. Scroll down to Make a note and press Select.
5. Scroll to Memo or Reminder, and press Select.
6. Enter your memo or reminder note, press Options, then press OK.
Entering Characters Using T9 Text Input
T9 Text Input (predictive text) lets you enter text in your PCS Phone by
pressing keys just once per letter.
For example, to use T9 Text Input for writing a memo to yourself:
1. Press Menu, scroll to a Organizer, and press Select.
2. Scroll to Calendar, and press Select.
3. Press Options, scroll to Make a note, and press Select.
4. Scroll to Memo (or any other type of text you wish to input), and
press Select.
5. Press and hold Options until T9 prediction on is momentarily
displayed on your screen. T9 Text input remains active until you turn
it off).
6. Key in your message. If your word does not appear by default, press
to view other words associated with this key combination, and
press Options. The current date appears on your screen to ensure
that you wish to apply the note to this date.
7. To accept a word and continue keying in your message press
.
8. Press OK. The Alarm type menu is displayed.
9. Scroll to the type of alarm notification you wish to assign to this note
and press Select.
10. Scroll to an option for when you want to be notified and press
Select.
Section 2: Understanding Your Phone
62 2H: Personal Organizer
11. Use the four-way scroll keys to designate a notification time and
press OK.
12. Press
to return to the Standby mode.
T9 Text Input analyzes the combination of letters you enter using an
intuitive word database, and creates a suitable word after you have
pressed in sequence the appropriate keys that contain the letters you seek.
Note that the word may change as you type, so it is best not to read the
screen until after you have keyed in your sequence.
Adding a Word to the T9 Database
If a word you want to enter does not display as an option when you are
using T9 Text Input, you can add it to the database.
To add a word to the T9 Text Input database from the Calendar menu:
1. Enter your text as instructed in previous section. If the word you need
does not appear, press
in the database.
to scroll through alternative words stored
2. If the word you need still does not appear, press Spell.
3. Enter your word, and press Save. This brings you back to your text
entry screen to allow you to continue entering your memo using
predictive text.
For more information about T9 Text Input, visit their Web site at
Calendar Alerts
There are several ways your PCS Phone alerts you of scheduled events:
ᮣ
ᮣ
ᮣ
By playing an alert tone.
By illuminating the backlight.
By flashing a message on your phone’s display screen.
Event Alert Options
Whether your phone your phone is On or Off, if you have an event alarm
scheduled, your phone alerts you and displays the following options.
ᮣ
Press View Detail to display the event’s time, date, description,
alarm and repeating status.
Section 2: Understanding Your Phone
2H: Personal Organizer 63
ᮣ
Press Exit to clear the alarm and return to the Standby mode.
Viewing Events and Event Options
To view your scheduled events:
1. From the Organizer menu, scroll to Calendar and press Select.
2. Scroll to the day you wish to view and press Options.
3. Scroll to View day and press Select.
4. Press either Options to modify this note, or
to return to
Standby mode.
Deleting a Day’s Events
To delete a scheduled day’s events:
1. From the Organizer menu, scroll to Calendar and press Select.
2. Scroll to the day you wish to edit and press Options.
3. Scroll to Delete and press Select. A message asking you if you want
to delete this note will appear on your display screen.
4. Press OK.
Going to Today’s Calendar Menu
When you view Calendar, today’s date is automatically highlighted. To
view Calendar events for today:
ᮣ
From the Calendar menu, press Options, scroll to View day, and
press Select.
Automatically Deleting Events
To delete events scheduled before a specific time and date:
1. From the Calendar menu, press Options.
2. Scroll to Settings and press Select.
3. Select View day, highlight the note you wish to delete, then press
Options.
4. Scroll to Auto-delete and press Select.
5. Scroll to the option you prefer and press Select.
Section 2: Understanding Your Phone
64 2H: Personal Organizer
Using the Calculator
Your phone comes with a built-in calculator function. To use this
feature, follow these easy steps:
1. From the Organizer menu, scroll to Calculator and press Select.
2. Use keypad to enter numbers, and press
to enter a decimal
point.
3. Press
once to add, twice to subtract, three times to multiply,
and four times to divide.
4. Press Options, then scroll to Equals and press Select to compute your
calculations.
Note: This calculator has a limited accuracy and rounding errors may
occur, especially in long divisions.
Playing Games
To play a game on your PCS Phone:
1. Press Menu, scroll to Games, and press Select.
2. Scroll to Select game and press Select.
3. Scroll to your preferred game and press Select.
4. Scroll to Instructions (if this is your first time playing this game)
and press Select
5. Press More to scroll through your instructions, and press Back to
review a previous screen.
From this point, you can begin a new game, change game settings
(tones), and review high scores to previous games you have played.
Section 2: Understanding Your Phone
2H: Personal Organizer 65
Section 2: Understanding Your Phone
66 2H: Personal Organizer
Section 2I
Using Your Phone’s Voice
Services
In This Section
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Voice-Activated Dialing
Changing a Voice Tag
Deleting All Voice Tags
Recording Memos
Memo Options
Deleting a Recorded Memo
his section explains the features associated with your phone’s
Voice Services. The easy-to-follow instructions explain how to make
calls and record memos.
Section 2: Understanding Your Phone
2I: Using Your Phone’s Voice Services 73
Voice-Activated Dialing
In addition to PCS Voice CommandSM (see page 93), you can use a voice
command that you set in your phone’s memory to automatically dial an
existing phone number in your Internal Phone Book.
To use voice-activated dialing, you must first assign a voice command to
the number you wish to call.
Assigning a Voice Command to a Phone Number
To assign a voice command (voice tag) to a phone number:
1. Press the down scroll key (
) to display your current list of
Internal Phone Book entries.
2. Scroll to the entry to which you wish to assign a voice command and
press Details. The number associated to this entry is displayed.
3. Press Options, scroll to Add voice tag, and press Select.
4. Press Start, then speak the command clearly as though you were
speaking normally into the phone. The voice command indicator
(
) is displayed on your screen.
5. Press Options to assign other features to this entry, or press
to
return to Standby mode.
Note: Be sure to record your voice command in a quiet environment and
without the aid of accessories (handsfree device) to avoid capturing
unwanted sounds. Unwanted sounds may cause your phone not to recognize
your command when you attempt to use voice dialing.
Making a Call Using a Voice Command
To make a call using a voice command:
1. Press and hold Names for 2 seconds.“Please speak now” and the
voice command indicator (
followed by a short tone.
) are displayed on your screen,
2. Speak the voice command into your phone’s microphone as you
originally assigned it. When your phone recognizes the command, it
replays your command and automatically dials the number.
Section 2: Understanding Your Phone
74 2I: Using Your Phone’s Voice Services
Note: Always attempt use voice dialing in a quiet environment. Your phone
may not recognize your command if background noise is too pervasive.
Warning: Never attempt to use voice-activated dialing to place emergency
(911) calls. During an emergency, the tone of your voice may be affected and
unrecognizable by your phone.
Changing a Voice Tag
To change a voice tag for an Internal Phone Book entry:
1. Press Names, scroll to Voice tags, and press Select.
2. Scroll to an existing entry and press Options.
3. Scroll to Change and press Select.
4. Press Start and speak into the microphone.
Note: When you finished speaking your voice tag, do not press Quit or your
message will be deleted.
Deleting a Voice Tags
To delete a voice tag:
1. Press Names, scroll to Voice tags, and press Select.
2. Scroll to an existing entry and press Options.
3. Scroll to Delete and press Select.
4. Press OK to confirm your choice.
Recording Memos
To record a memo:
1. Press
, scroll to Record, and press Select.
2. Record your message, then press Stop.
3. Enter the title of your recording and press OK.
- or -
Section 2: Understanding Your Phone
2I: Using Your Phone’s Voice Services 75
1. Press Menu, scroll to Organizer, and press Select.
2. Scroll to Voice recorder and press Select.
3. Scroll to Record and press Select.
4. Record your message, then press Stop.
5. Enter the title of your recording and press OK.
Note: Your phone can store a total of 60 seconds of memos.
Memo Options
To play the voice memos you have recorded:
1. Press Menu, scroll to Organizer, and press Select.
2. Scroll to Voice recorder and press Select.
3. Scroll to Recordings list and press Select.
4. Scroll to the recording you wish to play and press Options.
5. Scroll to Play and press Select.
Deleting a Recorded Memo
To delete a recorded memo:
1. Press Menu, scroll to Organizer, and press Select.
2. Scroll to Voice recorder and press Select.
3. Scroll to Recordings list and press Select.
4. Scroll to Delete and press OK.
Note: When you delete your final memo, a message indicating that all your
recordings are deleted appears on your display screen.
76
78
Section 3A
PCS Service Features: The Basics
In This Section
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Using Voicemail
Setting Up Your Voicemail
Voicemail Notification
New Voicemail Message Alerts
Retrieving Your Voicemail Messages
Voicemail Options
Clearing the Voice Message Indicator
Using Caller ID
Responding to Call Waiting
Making a Three-Way Call
Using Call Forwarding
ow that you’ve mastered your phone’s fundamentals, it’s time to
explore the calling features that enhance your PCS Service.
Section 3: Using PCS Service Features
3A: The Basics 79
Using Voicemail
Setting Up Your Voicemail
All unanswered calls to your PCS Phone are automatically transferred to
voicemail, even if your phone is in use or turned off. Therefore, you will
want to set up your PCS Voicemail and personal greeting as soon as your
PCS Phone is activated.
To set up voicemail:
1. Press and hold
for 2 seconds.
2. Follow the system prompts to create your pass code, record your
greeting, record your name announcement and choose whether to
activate One-Touch Message Access (a feature that lets you press one
key to access messages and bypasses the need for you to enter your
pass code).
Note: The voicemail setup process may vary in certain Affiliate areas.
Voicemail Notification
There are several ways your PCS Phone alerts you:
ᮣ
ᮣ
ᮣ
By displaying a message on the screen.
By sounding the assigned alert tone.
By displaying
at the top of your screen.
New Voicemail Message Alerts
When you receive a new voicemail message, your phone alerts you and
prompts you to call your voicemail.
To call your voicemail:
1. Press and hold
.
2. As soon as your hear your own greeting message, press and hold
. You will be prompted to enter your pass code, then follow the
prompts.
Tip: You can also press Listen when you receive notification of new
voicemail messages.
Section 3: Using PCS Service Features
80 3A: The Basics
Important: When you are roaming off the Sprint Nationwide PCS Network,
you may not receive notification of new voicemail messages. It is
recommended that you periodically check your voicemail by dialing
1 + area code + your PCS Phone Number. When your voicemail answers,
press
and enter your pass code. You will be charged roaming rates
when accessing voicemail while roaming off the Sprint Nationwide
PCS Network.
Note: Your phone accepts messages even when it is turned off. However,
you are only notified of new messages when your phone is turned on and
you are in a PCS Service Area.
Retrieving Your Voicemail Messages
You can review your messages directly from your PCS Phone or from any
other touch-tone phone. To dial from your PCS Phone, you can either
speed dial your voicemail or use the menu keys.
Using 1-Touch Message Access:
ᮣ
Press and hold
for 2 seconds. Follow the system prompts.
Using the Menu Keys on Your PCS Phone to Access Your
Messages:
1. Press Menu, scroll to Messaging and press Select.
2. Scroll to Voice messages and press Select.
3. Scroll to Call voicemail and press Select.
Note: You are charged for airtime minutes when you are accessing your
voicemail from your PCS Phone.
Using a Phone Other Than Your PCS Phone to Access
Your Messages:
1. Dial your PCS Phone Number.
2. When your voicemail answers, press
.
3. Enter your pass code.
Voicemail Options
Your PCS Phone offers several options for organizing and accessing
your voicemail.
Section 3: Using PCS Service Features
3A: The Basics 81
Setting Up Group Distribution Lists
Create up to 20 separate group lists, each with up to 20 customers.
1. Press and hold
to access your voicemail.
2. Following the system prompts, press
to change your
Personal Options.
3. Press
4. Press
for Administrative Options.
for Group Distribution Lists.
5. Follow the voice prompts to create, edit, rename or delete group lists.
Return a Call
Return a call after listening to a message without disconnecting
from voicemail.
1. After listening to a message, press
.
2. Enter the phone number.
3. Once the call is complete, you’re returned to the voicemail
main menu.
Voicemail-to-Voicemail Message
Record and send a voice message to other PCS Voicemail customers.
1. From the main voicemail menu, press
to send a message.
2. Follow the voice prompts to enter the phone number.
3. Follow the voice prompts to record and send your voice message.
Voicemail-to-Voicemail Message Reply
Reply to a voice message received from any other PCS Voicemail
customer.
1. After listening to a voice message, press
.
2. Follow the voice prompts to record and send your reply.
Voicemail-to-Voicemail Message Forwarding
Forward a voice message, except those marked “Private,” to other
PCS Voicemail customers.
1. After listening to a message, press
.
2. Follow the voice prompts to enter the phone number.
3. Follow the voice prompts to record your introduction and forward the
voice message.
Section 3: Using PCS Service Features
82 3A: The Basics
Voicemail-to-Voicemail Receipt Request
Receive confirmation that your voice message has been listened to when
you send, forward or reply to a message to other PCS customers.
1. After you have recorded a message, press
to indicate you are
satisfied with the message you recorded.
2. Press
to mark receipt requested.
Continue Recording
ᮣ
Before pressing
you recorded, press
to indicate you are satisfied with the message
to continue recording.
Extended Absence Greeting
When your phone is turned off or you are off the Sprint Nationwide
PCS Network for an extended period, this greeting can be played instead
of your normal personal greeting.
1. From the main voicemail menu, press
for Personal Options.
2. Press
3. Press
for Greetings.
to record an Extended Absence Greeting.
Clearing the Voice Message Indicator
Your phone may temporarily continue to display the indicator after you
have checked your voice and text messages.
To clear the icon from the display screen:
1. Press Menu, scroll to Messaging and press Select.
2. Scroll to Voice messages and press Select.
3. Scroll to Clear new voicemail icon and press OK.
Using Caller ID
Caller ID lets you know who’s calling by displaying the number of the
person calling when your phone rings. Similarly, if you call someone
who has this feature, your phone number displays on their phone. If the
caller’s name and number are already stored in your Internal Phone
Book, the corresponding name appears with the number.
To block your phone number from being displayed for a specific
outgoing call:
1. Press
.
Section 3: Using PCS Service Features
3A: The Basics 83
2. Enter the number you want to call.
3. Press
.
To permanently block your number, call PCS Customer Solutions.
Responding to Call Waiting
Call Waiting alerts you to incoming calls while you’re on a call by
sounding two beeps. The display screen informs you that a call is coming
in and shows the caller’s phone number (if it is available and you are in
digital mode).
To respond to an incoming call while you’re on a call:
ᮣ
Press
. This puts the first caller on hold and answers the
second call.
ᮣ
To switch back to the first caller, press
again.
Tip: For those calls where you don’t want to be interrupted, you can temporarily
disable Call Waiting by pressing
before placing your call. Call
Waiting is automatically reactivated once you end the call.
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at the same time.
When using this feature, the normal airtime rates will be charged for
each of the two calls.
1. Enter a number you wish to call and press
.
2. Once you have established the connection, press Options, scroll to
Three-way call, and press Select.
3. Dial the second number you wish to call and press
4. When you’re connected to the second party, press
begin your three-way call.
.
again to
If one of the people you called hangs up during your call, you and the
remaining caller stay connected. If you initiated the call and are the first
to hang up, all three callers are disconnected.
Tip: You can also begin a three-way call by displaying a phone number stored in
your Internal Phone Book, Call logs or Messaging.
Section 3: Using PCS Service Features
84 3A: The Basics
Note: Call Waiting and Three-Way Calling are not available while roaming off the
Sprint Nationwide PCS Network.
Using Call Forwarding
Call Forwarding lets you forward all your incoming calls to another
phone number – even when your phone is turned off. You can continue
to make calls from your phone with Call Forwarding activated.
To Activate Call Forwarding
1. Press
.
2. Enter the area code and phone number to which your future calls
should be forwarded.
3. Press
. You will see a message and hear a tone to confirm the
activation of Call Forwarding.
To Deactivate Call Forwarding
1. Press
.
2. Press
. You will see a message and hear a tone to confirm
the deactivation.
Note: You are charged a higher rate for calls you have forwarded.
Section 3: Using PCS Service Features
3A: The Basics 85
Section 3: Using PCS Service Features
86 3A: The Basics
Ringing Tones
Purchasing Ringing Tones
To purchase a ringing tone for your phone:
1. Point your PC Web browser to www.sprintpcs.com.
2. If you have purchased a ringing tone before, proceed to Step 3. If you
have not previously purchased a ringing tone, you will be prompted
to enter your account password and create your purchasing profile.
3. After purchasing the ringing tone, your phone notifies you that a
new ringing tone has been received
4. Press Options.
5. Select Playback hear the ringing tone, Save to save the ringing
tone to one of the 10 available memory locations, or Discard to
discard the ringing tone.
Games
You can play a variety of entertaining and graphically-rich games on
your PCS Phone.
Customizing Settings for Games
To customize the settings for your games:
1. Press Menu, scroll Games, and press Select.
2. Scroll to Settings and press Select.
3. Scroll through Game sounds, Game lights, and Shakes, and
activate or deactivate these features.
Playing Games
To play a game on your PCS Phone:
1. Press Menu, scroll Games, and press Select.
2. Scroll to Select a game and press Select.
3. Scroll to a game and press Select.
Each game comes with instructions, score history, and other options.
Section 3: Using PCS Service Features
88 3B: PCS Vision
Section 3: Using PCS Service Features
3B: PCS Vision 89
Section 3: Using PCS Service Features
90 3B: PCS Vision
Section 3C
PCS Voice CommandSM
In This Section
ᮣ
ᮣ
ᮣ
Getting Started with PCS Voice Command
Creating Your Own Address Book
Making a Call With PCS Voice Command
ith Sprint, the first wireless provider to offer innovative
PCS Voice Command technology, reaching your friends, family,
co-workers and teammates has never been easier—especially when
you’re on the go. Your voice does it all with PCS Voice Command.
Section 3: Using PCS Service Features
3C: PCS Voice Command 91
Getting Started with PCS Voice Command:
ᮣ
ᮣ
ᮣ
You can store all your contact’s phone numbers, so you can simply
say the name of the person you want to call.
There’s no need to punch in a lot of numbers, memorize voicemail
passwords or try to dial while you’re driving.
You can call anyone in your address book – even if you don’t
remember their phone number.
It’s Easy to Get Started
Just dial
from your PCS Phone to activate the service and
listen to brief instructions directly from your phone. There is a monthly
charge for PCS Voice Command.
Creating Your Own Address Book
You can program up to 500 names into your personal address book, with
each name having up to five phone numbers. That’s 2,500 phone
numbers – and with the advanced technology of PCS Voice Command –
you can have instant access to all of them.
There are four ways to update your address book:
ᮣ
Use Voice Recordings: Simply dial
and say, “Add
name.” You will then be asked to say the name and number you
want to add to your personal address book. Your address book can
store up to 20 voice recorded names at once.
ᮣ
ᮣ
a fully functional Web-based address book to create and update your
contacts.
Use an Existing Address Book: Automatically merge address
books from desktop software applications with Sprint SyncSM Services
for no additional charge. Simply click on the “Click to synchronize”
button within your PCS Voice Command personal address book at
Section 3: Using PCS Service Features
92 3C: PCS Voice Command
ᮣ
Call Directory Assistance: If you don’t have a computer or
Internet access handy, you can have PCS Directory Assistance look up
phone numbers for you and automatically add them to your address
book. Just say, “Call operator,” and we’ll add two names and
numbers to your address book for our standard directory assistance
charge.
Making a Call With PCS Voice Command
1. Once you’ve signed up for PCS Voice Command and created your
address book, all you do is press
followed by the prompt “Ready.”
. You’ll hear a tone
2. After the “Ready” prompt, simply say, in a natural voice, “Call” and
the name of the person or the number you’d like to call. For
example, you can say, “Call Jane Smith at work,” “Call John Baker
on the mobile phone,” “Call 555-1234” or “Call Bob Miller.”
3. Your request will be repeated and you will be asked to verify. Say
“Yes” to call the number or person. Say “No” if you wish to cancel.
4. The number will automatically be dialed. Keep in mind that
PCS Voice Command recognizes not only your voice, but any voice, so
that others can experience the same convenience if they use your phone.
For more helpful hints on PCS Voice Command, including a list of
recognized commands and an interactive tutorial, visit
Section 3: Using PCS Service Features
3C: PCS Voice Command 93
94
96
16
Safety
In This Section
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Getting the Most Out of Your Reception
Maintaining Safe Use of and Access to Your Phone
Caring for the Battery
Acknowledging Special Precautions and the FCC Notice
Consumer Information on Wireless Phones
Owner’s Record
User Guide Proprietary Notice
art of getting the most out of your PCS Phone is knowing where and
how it works at optimum efficiency. This section outlines performance
and safety guidelines that ensure you experience the full quality that your
PCS Phone was designed to give you.
P
Section 4: Safety Guidelines and Warranty Information
4A: Safety 97
Getting the Most Out of Your Reception
Keeping Tabs on Signal Strength
The quality of each call you make or receive depends on the signal
strength in your area. Your phone informs you of the current signal
strength by displaying a number of bars next to the signal strength icon.
The more bars displayed, the stronger the signal. If you’re inside a
building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a
Power Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it yourself by
pressing any key. Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your phone returns to
Standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it’s turned
on, it receives and transmits radio frequency (RF) signals. When you use
your phone, the system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital mode.
Knowing Radio frequency Safety
The design of your PCS Phone complies with updated NCRP standards
described below.
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE)
and the American National Standards Institute (ANSI) joined in
updating ANSI’s 1982 standard for safety levels with respect to human
exposure to RF signals. More than 120 scientists, engineers and
physicians from universities, government health agencies and industries
developed this updated standard after reviewing the available body of
research. In 1993, the Federal Communications Commission (FCC)
adopted this updated standard in a regulation. In August 1996, the FCC
adopted hybrid standard consisting of the existing ANSI/IEEE standard
and the guidelines published by the National Council of Radiation
Protection and Measurements (NCRP).
Section 4: Safety Guidelines and Warranty Information
98 4A: Safety
Maintaining Your Phone’s Peak Performance
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
ᮣ
Hold the phone with the antenna raised, fully-extended and over
your shoulder.
ᮣ
ᮣ
ᮣ
ᮣ
Try not to hold, bend or twist the phone’s antenna.
Don’t use the phone if the antenna is damaged.
Speak directly into the mouthpiece.
Avoid exposing your phone and accessories to rain or liquid spills.
If your phone does get wet, immediately turn the power off and
remove the battery. If it’s inoperable, return it to a Sprint Store or
call PCS Customer Solutions for service.
Note: For the best care of your phone, only Sprint authorized personnel
should service your phone and accessories. Faulty service may void
the warranty.
Maintaining Safe Use of and Access to
Your Phone
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO
SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
Using Your Phone While Driving
Talking on your phone while driving (or operating the phone without a
hands-free device) is prohibited in some jurisdictions. Laws vary as to
specific restrictions. Remember that safety always comes first.
When using your phone in the car:
ᮣ
Get to know your phone and its features, such as speed dial
and redial.
ᮣ
ᮣ
ᮣ
When available, use a hands-free device.
Position your phone within easy reach.
Let the person you are speaking to know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions.
Do not take notes or look up phone numbers while driving.
ᮣ
Section 4: Safety Guidelines and Warranty Information
4A: Safety 99
ᮣ
ᮣ
Dial sensibly and assess the traffic; if possible, place calls when
stationary or before pulling into traffic.
Do not engage in stressful or emotional conversations that may
divert your attention from the road.
ᮣ
ᮣ
ᮣ
Dial to report serious emergencies. It’s free from your wireless phone.
Use your phone to help others in emergencies.
Call roadside assistance or a special non-emergency wireless number
when necessary.
Tip: Purchase an optional Hands-Free Car Kit.
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any special
regulations in a given area. Turn your phone off in areas where use is
forbidden or when it may cause interference or danger.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, RF signals from wireless phones may affect
inadequately shielded electronic equipment.
RF signals may affect improperly installed or inadequately shielded
electronic operating systems and/or entertainment systems in motor
vehicles. Check with the manufacturer or their representative to
determine if these systems are adequately shielded from external RF
signals. Also check with the manufacturer regarding any equipment that
has been added to your vehicle.
Consult the manufacturer of any personal medical devices, such as
pacemakers and hearing aids, to determine if they are adequately
shielded from external RF signals.
Pacemakers
Pacemaker manufacturers recommend a distance of 20 cm be
maintained between a hand-held wireless phone and a pacemaker to
avoid interference with the pacemaker. These recommendations are
consistent with independent research and recommendations of Wireless
Technology Research.
Section 4: Safety Guidelines and Warranty Information
100 4A: Safety
PERSONS WITH A PACEMAKER:
ᮣ
Should always keep the phone at least 20 cm from their pacemaker
when the phone is switched on.
ᮣ
ᮣ
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to minimize the potential
for interference.
ᮣ
Should switch off the phone immediately if there is any reason to
suspect that interference is taking place.
Note: Always turn off the phone in health care facilities and request
permission before using the phone near medical equipment.
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent possible
interference with aircraft systems, the U.S. Federal Aviation
Administration (FAA) regulations require you to have permission from a
crew member to use your phone while the plane is on the ground. To
prevent any risk of interference, FCC regulations prohibit using your
phone while the plane is in the air.
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn off your phone when
in a blasting area or in other areas with signs indicating that two-way
radios should be turned off. Construction crews often use remote-control
RF devices to set off explosives.
Turn off your phone when you’re in any area that has a potentially
explosive atmosphere. Although it’s rare, your phone or its accessories
could generate sparks. Sparks could cause an explosion or a fire resulting
in bodily injury or even death. These areas are often, but not always,
clearly marked. They include:
ᮣ
ᮣ
ᮣ
ᮣ
Fueling areas such as gas stations.
Below deck on boats.
Fuel or chemical transfer or storage facilities.
Areas where the air contains chemicals or particles such as grain,
just or metal powders.
Section 4: Safety Guidelines and Warranty Information
4A: Safety 101
ᮣ
Any other area where you would normally be advised to turn off your
vehicle’s engine.
Note: Never transport or store flammable gas, liquid or explosives in the
compartment of your vehicle that contains your phone or accessories.
Restricting Children’s Access to your Phone
Your PCS Phone is not a toy. Children should not be allowed to play with
it because they could hurt themselves and others, damage the phone or
make calls that increase your phone bill.
Section 4: Safety Guidelines and Warranty Information
102 4A: Safety
Caring for the Battery
Protecting Your Battery
The guidelines listed below help you get the most out of your
battery’s performance.
ᮣ
Use only Sprint-approved batteries and desktop chargers. These
chargers are designed to maximize battery life. Using other batteries
or chargers may void your warranty and may cause damage.
In order to avoid damage, charge the battery only in temperatures
that range from 32º F to 113º F (0º C to 45º C).
ᮣ
ᮣ
Don’t use the battery charger in direct sunlight or in high humidity
areas, such as the bathroom.
ᮣ
ᮣ
ᮣ
ᮣ
Never dispose of the battery by incineration.
Keep the metal contacts on top of the battery clean.
Don’t attempt to disassemble or short-circuit the battery.
The battery may need recharging if it has not been used for a long
period of time.
ᮣ
ᮣ
It’s best to replace the battery when it no longer provides acceptable
performance. It can be recharged hundreds of times before it needs
replacing.
Don’t store the battery in high temperature areas for long periods of
time. It’s best to follow these storage rules:
Less than one month:
4º F to 140º F (-20º C to 60º C)
More than one month:
4º F to 113º F (-20º C to 45º C)
Disposal of Lithium Ion (Li-Ion) Batteries
For safe disposal options of your Li-Ion batteries, contact your nearest
Sprint-authorized service center.
Special Note: Be sure to dispose of your battery properly. In some areas,
the disposal of batteries in household or business trash may be prohibited.
Note: For safety, do not handle a damaged or leaking Li-Ion battery.
Section 4: Safety Guidelines and Warranty Information
4A: Safety 103
Acknowledging Special Precautions and the
FCC Notice
FCC Notice
The phone may cause TV or radio interference if used in close proximity
to receiving equipment. The FCC can require you to stop using the phone
if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must
comply with the National Fire Protection Standard (NFPA-58). For a copy
of this standard, contact the National Fire Protection Association,
One Batterymarch Park, Quincy, MA 02269, Attn: Publication
Sales Division.
Cautions
Any changes or modifications to your phone not expressly approved in
this document could void your warranty for this equipment, and void
your authority to operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized accessories may be
dangerous and void the phone warranty if said accessories cause damage
or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment
and can be broken. Avoid dropping, hitting, bending or sitting on it.
CERTIFICATION INFORMATION (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS
FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission
of the U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the general
population. The guidelines are based on standards that were developed
by independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial safety
Section 4: Safety Guidelines and Warranty Information
104 4A: Safety
margin designed to assure the safety of all persons, regardless of age and
health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using
standard operating positions accepted by the FCC with the phone
transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be well below
the maximum value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna,
the lower the power output.
Before a phone model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by
the government-adopted requirement for safe exposure. The tests are
performed in positions and locations (for example, at the ear and worn
on the body) as required by the FCC for each model. The following values
are the highest SAR values for this model phone as reported to the FCC.
The highest reported SAR values of the Nokia 3585 phone are:
AMPS mode (Part 22) - Head: 1.28 W/kg; Body-worn: 1.28 W/kg
PCS mode (Part 24) - Head: 1.14 W/kg; Body-worn: 0.983 W/kg
(Body-worn measurements differ among phone models, depending upon
available accessories and FCC requirements).
While there may be differences between the SAR levels of various phones
and at various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this model phone
with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this model phone is on file with
the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
GMLNPD1AW.
For body worn operation, this phone has been tested and meets the FCC
RF exposure guidelines when used with the Nokia accessories supplied or
Section 4: Safety Guidelines and Warranty Information
4A: Safety 105
designated for this product. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
*In the United States and Canada, the SAR limit for mobile phones used
by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in
measurements. SAR values may vary depending on national reporting
requirements and the network band. For SAR information in other
regions please look under product information at www.nokia.gov.
Consumer Information on Wireless Phones
(The following information comes from a consumer information
Web site jointly sponsored by the U.S. Food and Drug Administration
(FDA) and the Federal Communications Commission (FCC), entitled
“Cell Phone Facts: Consumer Information on Wireless Phones.” The
information reproduced herein is dated April 3, 2002. For further
1. What is radio frequency energy
Radio frequency (RF) energy is another name for radio waves. It is one
form of electromagnetic energy that makes up the electromagnetic
spectrum. Some of the other forms of energy in the electromagnetic
spectrum are gamma rays, x-rays and light. Electromagnetic energy (or
electromagnetic radiation) consists of waves of electric and magnetic
energy moving together (radiating) through space. The area where these
waves are found is called an electromagnetic field.
Radio waves are created due to the movement of electrical charges in
antennas. As they are created, these waves radiate away from the
antenna. All electromagnetic waves travel at the speed of light. The major
differences between the different types of waves are the distances covered
by one cycle of the wave and the number of waves that pass a certain
point during a set time period. The wavelength is the distance covered by
one cycle of a wave. The frequency is the number of waves passing a
given point in one second. For any electromagnetic wave, the wavelength
multiplied by the frequency equals the speed of light. The frequency of an
RF signal is usually expressed in units called hertz (Hz). One Hz equals
Section 4: Safety Guidelines and Warranty Information
106 4A: Safety
one wave per second. One kilohertz (kHz) equals one thousand waves per
second, one megahertz (MHz) equals one million waves per second, and
one gigahertz (GHz) equals one billion waves per second.
RF energy includes waves with frequencies ranging from about 3000
waves per second (3 kHz) to 300 billion waves per second (300 GHz).
Microwaves are a subset of radio waves that have frequencies ranging
from around 300 million waves per second (300 MHz) to three billion
waves per second (3 GHz).
2. How is radio frequency energy used?
Probably the most important use of RF energy is for
telecommunications. Radio and TV broadcasting, wireless phones,
pagers, cordless phones, police and fire department radios, point-to-point
links and satellite communications all rely on RF energy.
Other uses of RF energy include microwave ovens, radar, industrial
heaters and sealers, and medical treatments. RF energy, especially at
microwave frequencies, can heat water. Since most food has a high water
content, microwaves can cook food quickly. Radar relies on RF energy to
track cars and airplanes as well as for military applications. Industrial
heaters and sealers use RF energy to mold plastic materials, glue wood
products, seal leather items such as shoes and pocketbooks, and process
food. Medical uses of RF energy include pacemaker monitoring and
programming.
3. How is radio frequency radiation measured?
RF waves and RF fields have both electrical and magnetic components. It
is often convenient to express the strength of the RF field in terms of each
component. For example, the unit "volts per meter" (V/m) is used to
measure the electric field strength, and the unit "amperes per meter" (A/
m) is used to express the magnetic field strength. Another common way
to characterize an RF field is by means of the power density. Power
density is defined as power per unit area. For example, power density can
be expressed in terms of milliwatts (one thousandth of a watt) per square
centimeter (mW/cm2 or microwatts (one millionth of a watt) per square
centimeter (µW/cm2).
The quantity used to measure how much RF energy is actually absorbed
by the body is called the Specific Absorption Rate or SAR. The SAR is a
Section 4: Safety Guidelines and Warranty Information
4A: Safety 107
measure of the rate of absorption of RF energy. It is usually expressed in
units of watts per kilogram (W/kg) or milliwatts per gram (mW/g).
4. What biological effects can be caused by RF energy?
The biological effects of radio frequency energy should not be confused
with the effects from other types of electromagnetic energy.
Very high levels of electromagnetic energy, such as is found in X-rays and
gamma rays can ionize biological tissues. Ionization is a process where
electrons are stripped away from their normal locations in atoms and
molecules. It can permanently damage biological tissues including DNA,
the genetic material. Ionization only occurs with very high levels of
electromagnetic energy such as X-rays and gamma rays. Often the term
radiation is used when discussing ionizing radiation (such as that
associated with nuclear power plants).
The energy levels associated with radio frequency energy, including both
radio waves and microwaves, are not great enough to cause the
ionization of atoms and molecules. Therefore, RF energy is a type of non-
ionizing radiation. Other types of non-ionizing radiation include visible
light, infrared radiation (heat) and other forms of electromagnetic
radiation with relatively low frequencies.
Large amounts of RF energy can heat tissue. This can damage tissues
and increase body temperatures. Two areas of the body, the eyes and the
testes, are particularly vulnerable to RF heating because there is
relatively little blood flow in them to carry away excess heat.
The amount of RF radiation routinely encountered by the general public
is too low to produce significant heating or increased body temperature.
Still, some people have questions about the possible health effects of low
levels of RF energy. It is generally agreed that further research is needed
to determine what effects actually occur and whether they are dangerous
to people. In the meantime, standards-setting organizations and
government agencies are continuing to monitor the latest scientific
findings to determine whether changes in safety limits are needed to
protect human health.
FDA, EPA and other US government agencies responsible for public
health and safety have worked together and in connection with WHO to
Section 4: Safety Guidelines and Warranty Information
108 4A: Safety
monitor developments and identify research needs related to RF
biological effects.
5. What levels of RF energy are considered safe?
Various organizations and countries have developed standards for
exposure to radio frequency energy. These standards recommend safe
levels of exposure for both the general public and for workers. In the
United States, the FCC has used safety guidelines for RF environmental
exposure since 1985.
The FCC guidelines for human exposure to RF electromagnetic fields are
derived from the recommendations of two expert organizations, the
National Council on Radiation Protection and Measurements (NCRP)
and the Institute of Electrical and Electronics Engineers (IEEE). In both
cases, the recommendations were developed by scientific and engineering
experts drawn from industry, government, and academia after extensive
reviews of the scientific literature related to the biological effects of
RF energy.
Many countries in Europe and elsewhere use exposure guidelines
developed by the International Commission on Non-Ionizing Radiation
Protection (ICNIRP). The ICNIRP safety limits are generally similar to
those of the NCRP and IEEE, with a few exceptions. For example, ICNIRP
recommends different exposure levels in the lower and upper frequency
ranges and for localized exposure from certain products such as hand-
held wireless telephones. Currently, the World Health Organization is
working to provide a framework for international harmonization of RF
safety standards.
The NCRP, IEEE, and ICNIRP all have identified a whole-body Specific
Absorption Rate (SAR) value of 4 watts per kilogram (4 W/kg) as a
threshold level of exposure at which harmful biological effects may
occur. Exposure guidelines in terms of field strength, power density and
localized SAR were then derived from this threshold value. In addition,
the NCRP, IEEE, and ICNIRP guidelines vary depending on the frequency
of the RF exposure. This is due to the finding that whole-body human
absorption of RF energy varies with the frequency of the RF signal. The
most restrictive limits on whole-body exposure are in the frequency range
of 30-300 MHz where the human body absorbs RF energy most efficiently.
Section 4: Safety Guidelines and Warranty Information
4A: Safety 109
For products that only expose part of the body, such as wireless phones,
exposure limits in terms of SAR only are specified.
The exposure limits used by the FCC are expressed in terms of SAR,
electric and magnetic field strength, and power density for transmitters
operating at frequencies from 300 kHz to 100 GHz. The specific values
can be found in two FCC bulletins, OET Bulletins 56 and 65:
6. Why has the FCC adopted guidelines for RF exposure?
The FCC authorizes and licenses products, transmitters, and facilities
that generate RF and microwave radiation. It has jurisdiction over all
transmitting services in the U.S. except those specifically operated by the
Federal Government. While the FCC does not have the expertise to
determine radiation exposure guidelines on its own, it does have the
expertise and authority to recognize and adopt technically sound
standards promulgated by other expert agencies and organizations, and
has done so. (Our joint efforts with the FDA in developing this website is
illustrative of the kind of inter-agency efforts and consultation we engage
in regarding this health and safety issue.)
Under the National Environmental Policy Act of 1969 (NEPA), the FCC
has certain responsibilities to consider whether its actions will
significantly affect the quality of the human environment. Therefore,
FCC approval and licensing of transmitters and facilities must be
evaluated for significant impact on the environment. Human exposure to
RF radiation emitted by FCC-regulated transmitters is one of several
factors that must be considered in such environmental evaluations. In
1996, the FCC revised its guidelines for RF exposure as a result of a multi-
year proceeding and as required by the Telecommunications Act of 1996.
Radio and television broadcast stations, satellite-earth stations,
experimental radio stations and certain wireless communication
facilities are required to undergo routine evaluation for RF compliance
when they submit an application to the FCC for construction or
modification of a transmitting facility or renewal of a license. Failure to
comply with the FCC's RF exposure guidelines could lead to the
preparation of a formal Environmental Assessment, possible
Section 4: Safety Guidelines and Warranty Information
110 4A: Safety
Environmental Impact Statement and eventual rejection of an
application. Technical guidelines for evaluating compliance with the
FCC RF safety requirements can be found in the FCC's OET Bulletin 65.
Low-powered, intermittent, or inaccessible RF transmitters and facilities
are normally excluded from the requirement for routine evaluation for
RF exposure. These exclusions are based on standard calculations and
measurement data indicating that a transmitting station or equipment
operating under the conditions prescribed is unlikely to cause exposures
in excess of the guidelines under normal conditions of use. Such
exclusions are not exclusions from compliance, but, rather, exclusions
from routine evaluation. The FCC's policies on RF exposure and
categorical exclusion can be found in Section 1.1307(b) of the FCC's
Rules and Regulations [(47 CFR 1.1307(b)].
7. How can I obtain the Specific Absorption Rate (SAR) value for
my wireless phone?
The FCC requires that wireless phones sold in the United States
demonstrate compliance with human exposure limits adopted by the
FCC in 1996. The relative amount of RF energy absorbed in the head of a
wireless telephone-user is given by the Specific Absorption Rate (SAR), as
explained above. The FCC requires wireless phones to comply with a
safety limit of 1.6 watts per kilogram (1.6 W/kg) in terms of SAR.
Information on SAR for a specific phone model can be obtained for many
recently manufactured phones using the FCC identification (ID) number
for that model. The FCC ID number is usually printed somewhere on the
case of the phone. Sometimes it may be necessary to remove the battery
pack to find the number. Once you have the ID number, go to the
instructions for entering the FCC ID number. Type the FCC ID number
exactly as requested (the Grantee Code is the first three characters, the
Equipment Product Code is the rest of the FCC ID number). Then click
on "Start Search." The "Grant of Equipment Authorization" for your
telephone should appear. Read through the grant for the section on "SAR
Compliance," "Certification of Compliance with FCC Rules for RF
Section 4: Safety Guidelines and Warranty Information
4A: Safety 111
Exposure" or similar language. This section should contain the value(s)
for typical or maximum SAR for your phone.
Phones and other products authorized since June 2, 2000, should have
the maximum SAR levels noted directly on the "Grant of Equipment
Authorization." For phones and products authorized between about mid-
1998 and June 2000, detailed information on SAR levels is typically
found in the exhibits associated with the grant. Once a grant is accessed,
the exhibits can be viewed by clicking on "View Exhibit." Grants
authorized prior to 1998 are not part of the electronic database but,
rather, have been documented in the form of paper records.
The FCC database does not list phones by model number. However,
consumers may find SAR information from other sources as well. Some
wireless phone manufacturers make SAR information available on their
own Web sites. In addition, some non-government Web sites provide SARs
for specific models of wireless phones. However, the FCC has not reviewed
these sites and makes no guarantees of their accuracy. Finally, phones
certified by the Cellular Telecommunications and Internet Association
(CTIA) are required to provide SAR information to consumers in the
instructional materials that come with the phones.
8. Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from
wireless phones, there is no reason to believe that hands-free kits reduce
risks. Hands-free kits can be used with wireless phones for convenience
and comfort. These systems reduce the absorption of RF energy in the
head because the phone, which is the source of the RF emissions, will not
be placed against the head. On the other hand, if the phone is mounted
against the waist or other part of the body during use, then that part of
the body will absorb more RF energy. Wireless phones marketed in the
U.S. are required to meet safety requirements regardless of whether they
are used against the head or against the body. Either configuration
should result in compliance with the safety limit.
Section 4: Safety Guidelines and Warranty Information
112 4A: Safety
9. Do wireless phone accessories that claim to shield the head
from RF radiation work?
Since there are no known risks from exposure to RF emissions from
wireless phones, there is no reason to believe that accessories that claim
to shield the head from those emissions reduce risks. Some products that
claim to shield the user from RF absorption use special phone cases,
while others involve nothing more than a metallic accessory attached to
the phone. Studies have shown that these products generally do not work
as advertised. Unlike "handsfree" kits, these so-called "shields" may
interfere with proper operation of the phone. The phone may be forced to
boost its power to compensate, leading to an increase in RF absorption.
In February 2002, the Federal trade Commission (FTC) charged two
companies that sold devices that claimed to protect wireless phone
users from radiation with making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
10. What are wireless telephone base stations?
Fixed antennas used for wireless telecommunications are referred to as
cellular base stations, cell stations, PCS ("Personal Communications
Service") stations or telephone transmission towers. These base stations
consist of antennas and electronic equipment. Because the antennas
need to be high in the air, they are often located on towers, poles, water
tanks, or rooftops. Typical heights for freestanding base station towers are
50-200 feet.
Some base stations use antennas that look like poles, 10 to 15 feet in
length, that are referred to as "omni-directional" antennas. These types
of antennas are usually found in rural areas. In urban and suburban
areas, wireless providers now more commonly use panel or sector
antennas for their base stations. These antennas consist of rectangular
panels, about 1 by 4 feet in dimension. The antennas are usually
arranged in three groups of three antennas each. One antenna in each
group is used to transmit signals to wireless phones, and the other two
antennas in each group are used to receive signals from wireless phones.
At any base station site, the amount of RF energy produced depends on
the number of radio channels (transmitters) per antenna and the power
Section 4: Safety Guidelines and Warranty Information
4A: Safety 113
of each transmitter. Typically, 21 channels per antenna sector are
available. For a typical cell site using sector antennas, each of the three
transmitting antennas could be connected to up to 21 transmitters for a
total of 63 transmitters. However, it is unlikely that all of the transmitters
would be transmitting at the same time. When omni-directional
antennas are used, a cellular base station could theoretically use up to 96
transmitters, but this would be very unusual, and, once again, it is
unlikely that all transmitters would be in operation simultaneously. Base
stations used for PCS communications generally require fewer
transmitters than those used for cellular radio transmissions, since PCS
carriers usually have a higher density of base station antenna sites.
11. Are wireless telephone base stations safe?
The electromagnetic RF signals transmitted from base station antennas
stations travel toward the horizon in relatively narrow paths. For
example, the radiation pattern for an antenna array mounted on a tower
can be likened to a thin pancake centered around the antenna system.
The individual pattern for a single array of sector antennas is wedge-
shaped, like a piece of pie. As with all forms of electromagnetic energy,
the power decreases rapidly as one moves away from the antenna.
Therefore, RF exposure on the ground is much less than exposure very
close to the antenna and in the path of the transmitted radio signal. In
fact, ground-level exposure from such antennas is typically thousands of
times less than the exposure levels recommended as safe by expert
organizations. So exposure to nearby residents would be well within
safety margins.
Cellular and PCS base stations in the United States are required to
comply with limits for exposure recommended by expert organizations
and endorsed by government agencies responsible for health and safety.
Measurements made near cellular and PCS base station antennas
mounted on towers have confirmed that ground-level exposures are
typically thousands of times less than the exposure limits adopted by the
FCC. In fact, in order to be exposed to levels at or near the FCC limits for
cellular or PCS frequencies an individual would essentially have to
remain in the main transmitted radio signal (at the height of the
Section 4: Safety Guidelines and Warranty Information
114 4A: Safety
antenna) and within a few feet from the antenna. This is, of course, very
unlikely to occur.
When cellular and PCS antennas are mounted on rooftops, RF levels on
that roof or on others near by would probably be greater than those
typically encountered on the ground. However, exposure levels
approaching or exceeding safety guidelines should be encountered only
very close to or directly in front of the antennas. In addition, for sector-
type antennas, typically used for such rooftop base stations, RF levels to
the side and in back of these antennas are insignificant. General
guidelines on antenna installations and circumstances that might give
rise to a concern about an facility's conformance with FCC regulations
can be found in A Local Government Official's Guide to Transmitting
Antenna RF Emission Safety: Rules, Procedures, and Practical Guidance.
12. Who regulates exposure to radiation from microwave ovens,
television sets and computer monitors?
The Food and Drug Administration is responsible for protecting the
public from harmful radiation emissions from these consumer products.
13. Does the FCC routinely monitor radio frequency radiation from
antennas?
The FCC does not have the resources or the personnel to routinely
monitor the emissions for all the thousands of transmitters that are
subject to FCC jurisdiction. However, the FCC does have measurement
instrumentation for evaluating RF levels in areas that may be accessible
to the public or to workers. If there is evidence for potential non-
compliance with FCC exposure guidelines for a FCC-regulated facility,
staff from the FCC's Office of Engineering and Technology or the FCC
Enforcement Bureau can conduct and investigation, and, if appropriate,
perform actual measurements. Circumstances that could give rise to a
concern about an facility's conformance with FCC regulations can be
found in A Local Government Official's Guide to Transmitting Antenna
RF Emission Safety: Rules, Procedures, and Practical Guidance. This
exposure problems should be brought to the FCC's attention by
contacting the FCC RF Safety Program at: 202-418-2464 or by e-mail:
Section 4: Safety Guidelines and Warranty Information
4A: Safety 115
14. Does the FCC maintain a database that includes information on
the location and technical parameters of all the transmitting
towers it regulates?
Each of the FCC Bureaus maintains its own licensing database system for
the service(s) it regulates (e.g., television, cellular service, satellite earth
stations.) The FCC issues two types of licenses: site specific and market
based. In the case of site specific licensed facilities, technical operating
information is collected from the licensee as part of the licensing process.
However, in the case of market based licensing (e.g., PCS, cellular), the
licensee is granted the authority to operate a radio communications
system in a geographic area using as many facilities as are required, and
the licensee is not required to provide the FCC with specific location and
operating parameters of these facilities.
Information on site specific licensed facilities can be found in the
"General Menu Reports" (GenMen) at
The various FCC Bureaus also publish on at least a weekly basis, bulk
extracts of their licensing databases. Each licensing database has its own
unique file structure. These extracts consist of multiple, very large files.
The FCC's Office of Engineering and Technology (OET) maintains an
index to these databases at http://www.fcc.gov/oet/info/database/
fadb.html. Entry points into the various databases include frequency,
state/county, latitude/longitude, call-sign and licensee name. For further
information on the Commission's existing databases, you can contact
Donald Campbell at [email protected] or 202-418-2405.
15. Can local and state governmental bodies establish limits for RF
exposure?
Although some local and state governments have enacted rules and
regulations about human exposure to RF energy in the past, the
Telecommunications Act of 1996 requires the Federal Government to
control human exposure to RF emissions. In particular, Section 704 of
the Act states that, "No State or local government or instrumentality
thereof may regulate the placement, construction, and modification of
personal wireless service facilities on the basis of the environmental
effects of radio frequency emissions to the extent that such facilities
comply with the Commission's regulations concerning such emissions."
Section 4: Safety Guidelines and Warranty Information
116 4A: Safety
Further information on federal authority and FCC policy is available in a
fact sheet from the FCC's Wireless Telecommunications Bureau at
16. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems
are associated with using wireless phones. There is no proof, however,
that wireless phones are absolutely safe. Wireless phones emit low levels
of radio frequency energy (RF) in the microwave range while being used.
They also emit very low levels of RF when in the stand-by mode. Whereas
high levels of RF can produce health effects (by heating tissue), exposure
to low level RF that does not produce heating effects causes no known
adverse health effects. Many studies of low level RF exposures have not
found any biological effects. Some studies have suggested that some
biological effects may occur, but such findings have not been confirmed
by additional research. In some cases, other researchers have had
difficulty in reproducing those studies, or in determining the reasons for
inconsistent results.
17. What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting
consumer products such as wireless phones before they can be sold, as it
does with new drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the user. In such a
case, FDA could require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace or recall the phones so
that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a number of
steps, including the following:
ᮣ
Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
ᮣ
Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Section 4: Safety Guidelines and Warranty Information
4A: Safety 117
ᮣ
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health
FDA belongs to an interagency working group of the federal agencies that
have responsibility for different aspects of RF safety to ensure coordinated
efforts at the federal level. The following agencies belong to this working
group:
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the
Federal Communications Commission (FCC). All phones that are sold in
the United States must comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies for safety
questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely
upon. While these base stations operate at higher power than do the
wireless phones themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than those they can
get from wireless phones. Base stations are thus not the primary subject
of the safety questions discussed in this document.
18. What kinds of phones are the subject of this update?
The term “wireless phone” refers here to hand-held wireless phones with
built-in antennas, often called “cell,” “mobile,” or “PCS” phones. These
types of wireless phones can expose the user to measurable radio
frequency energy (RF) because of the short distance between the phone
and the user’s head. These RF exposures are limited by Federal
Communications Commission safety guidelines that were developed with
the advice of FDA and other federal health and safety agencies. When the
phone is located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with
Section 4: Safety Guidelines and Warranty Information
118 4A: Safety
increasing distance from the source. The so-called "cordless phones,"
which have a base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus produce RF exposures
well within the FCC's compliance limits.
19. What are the results of the research done already?
The research done thus far has produced conflicting results, and many
studies have suffered from flaws in their research methods. Animal
experiments investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories. A few animal
studies, however, have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of the
studies that showed increased tumor development used animals that had
been genetically engineered or treated with cancer-causing chemicals so
as to be pre-disposed to develop cancer in the absence of RF exposure.
Other studies exposed the animals to RF for up to 22 hours per day. These
conditions are not similar to the conditions under which people use
wireless phones, so we don’t know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published since December
2000. Between them, the studies investigated any possible association
between the use of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain or salivary
gland, leukemia, or other cancers. None of the studies demonstrated the
existence of any harmful health effects from wireless phone RF
exposures. However, none of the studies can answer questions about
long-term exposures, since the average period of phone use in these
studies was around three years.
20. What research is needed to decide whether RF exposure from
wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of
people actually using wireless phones would provide some of the data
that are needed. Lifetime animal exposure studies could be completed in
a few years. However, very large numbers of animals would be needed to
provide reliable proof of a cancer promoting effect if one exists.
Section 4: Safety Guidelines and Warranty Information
4A: Safety 119
Epidemiological studies can provide data that is directly applicable to
human populations, but 10 or more years’ follow-up may be needed to
provide answers about some health effects, such as cancer. This is
because the interval between the time of exposure to a cancer-causing
agent and the time tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies is hampered by
difficulties in measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement, such as the angle
at which the phone is held, or which model of phone is used.
21. What is FDA doing to find out more about the possible health
effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with
groups of investigators around the world to ensure that high priority
animal studies are conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health Organization
International Electromagnetic Fields (EMF) Project since its inception in
1996. An influential result of this work has been the development of a
detailed agenda of research needs that has driven the establishment of
new research programs around the world. The Project has also helped
develop a series of public information documents on EMF issues.
FDA and the Cellular Telecommunications & Internet Association (CTIA)
have a formal Cooperative Research and Development Agreement
(CRADA) to do research on wireless phone safety. FDA provides the
scientific oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded research is
conducted through contracts to independent investigators. The initial
research will include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad assessment of
additional research needs in the context of the latest research
developments around the world.
22. What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products--and at this point we do not know
that there is--it is probably very small. But if you are concerned about
Section 4: Safety Guidelines and Warranty Information
120 4A: Safety
avoiding even potential risks, you can take a few simple steps to
minimize your exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives, reducing the amount
of time spent using a wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone every day,
you could place more distance between your body and the source of the
RF, since the exposure level drops off dramatically with distance. For
example, you could use a headset and carry the wireless phone away
from your body or use a wireless phone connected to a remote antenna
Again, the scientific data do not demonstrate that wireless phones are
harmful. But if you are concerned about the RF exposure from these
products, you can use measures like those described above to reduce your
RF exposure from wireless phone use.
23. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless
phones, including children and teenagers. If you want to take steps to
lower exposure to radio frequency energy (RF), the measures described
above would apply to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF exposure.
Some groups sponsored by other national governments have advised that
children be discouraged from using wireless phones at all. For example,
the government in the United Kingdom distributed leaflets containing
such a recommendation in December 2000. They noted that no evidence
exists that using a wireless phone causes brain tumors or other ill effects.
Their recommendation to limit wireless phone use by children was
strictly precautionary; it was not based on scientific evidence that any
health hazard exists.
24. What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can interact with
some electronic devices. For this reason, FDA helped develop a detailed
test method to measure electromagnetic interference (EMI) of implanted
cardiac pacemakers and defibrillators from wireless telephones. This test
method is now part of a standard sponsored by the Association for the
Section 4: Safety Guidelines and Warranty Information
4A: Safety 121
Advancement of Medical instrumentation (AAMI). The final draft, a
joint effort by FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are
safe from wireless phone EMI.
FDA has tested hearing aids for interference from handheld wireless
phones and helped develop a voluntary standard sponsored by the
Institute of Electrical and Electronic Engineers (IEEE). This standard
specifies test methods and performance requirements for hearing aids
and wireless phones so that no interference occurs when a person uses a
“compatible” phone and a “compatible” hearing aid at the same time.
This standard was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful interference be
found to occur, FDA will conduct testing to assess the interference and
work to resolve the problem.
25. Which other federal agencies have responsibilities related to
potential RF health effects?
Certain agencies in the Federal Government have been involved in
monitoring, researching or regulating issues related to human exposure
to RF radiation. These agencies include the Food and Drug
Administration (FDA), the Environmental Protection Agency (EPA), the
Occupational Safety and Health Administration (OSHA), the National
Institute for Occupational Safety and Health (NIOSH), the National
Telecommunications and Information Administration (NTIA) and the
Department of Defense (DOD).
By authority of the Radiation Control for Health and Safety Act of 1968,
the Center for Devices and Radiological Health (CDRH) of the FDA
develops performance standards for the emission of radiation from
electronic products including X-ray equipment, other medical devices,
television sets, microwave ovens, laser products and sunlamps. The
CDRH established a product performance standard for microwave ovens
in 1971 limiting the amount of RF leakage from ovens. However, the
CDRH has not adopted performance standards for other RF-emitting
products. The FDA is, however, the lead federal health agency in
Section 4: Safety Guidelines and Warranty Information
122 4A: Safety
monitoring the latest research developments and advising other agencies
with respect to the safety of RF-emitting products used by the public, such
as cellular and PCS phones.
The FDA's microwave oven standard is an emission standard (as opposed
to an exposure standard) that allows specific levels of microwave leakage
(measured at five centimeters from the oven surface). The standard also
requires ovens to have two independent interlock systems that prevent the
oven from generating microwaves the moment that the latch is released
or the door of the oven is opened. The FDA has stated that ovens that meet
its standards and are used according to the manufacturer's
recommendations are safe for consumer and industrial use. More
The EPA has, in the past, considered developing federal guidelines for
public exposure to RF radiation. However, EPA activities related to RF
safety and health are presently limited to advisory functions. For
example, the EPA now chairs an Inter-agency Radio Frequency Working
Group, which coordinates RF health-related activities among the various
federal agencies with health or regulatory responsibilities in this area.
OSHA is responsible for protecting workers from exposure to hazardous
chemical and physical agents. In 1971, OSHA issued a protection guide
for exposure of workers to RF radiation [29 CFR 1910.97]. However, this
guide was later ruled to be only advisory and not mandatory. Moreover, it
was based on an earlier RF exposure standard that has now been revised.
At the present time, OSHA uses the IEEE and/or FCC exposure guidelines
for enforcement purposes under OSHA's "general duty clause" (for more
information see:
NIOSH is part of the U.S. Department of Health and Human Services. It
conducts research and investigations into issues related to occupational
exposure to chemical and physical agents. NIOSH has, in the past,
undertaken to develop RF exposure guidelines for workers, but final
guidelines were never adopted by the agency. NIOSH conducts safety-
related RF studies through its Physical Agents Effects Branch in
Cincinnati,Ohio.
Section 4: Safety Guidelines and Warranty Information
4A: Safety 123
The NTIA is an agency of the U.S. Department of Commerce and is
responsible for authorizing Federal Government use of the RF
electromagnetic spectrum. Like the FCC, the NTIA also has NEPA
responsibilities and has considered adopting guidelines for evaluating
RF exposure from U.S. Government transmitters such as radar and
military facilities.
The Department of Defense (DOD) has conducted research on the
biological effects of RF energy for a number of years. This research is now
conducted primarily at the U.S. Air Force Research Laboratory located at
Brooks Air Force Base, Texas. The DOD Web site for RF biological effects
information is listed with other sites in conjunction with a question on
other sources of information, below.
26. Who funds and carries out research on the biological effects of
RF energy?
Research into possible biological effects of RF energy is carried out in
laboratories in the United States and around the world. In the U.S., most
research has been funded by the Department of Defense, due to the
extensive military use of RF equipment such as radar and high-powered
radio transmitters. In addition, some federal agencies responsible for
health and safety, such as the Environmental Protection Agency (EPA)
and the U.S. Food and Drug Administration (FDA), have sponsored and
conducted research in this area. At the present time, most of the non-
military research on biological effects of RF energy in the U.S. is being
funded by industry organizations. More research is being carried out
overseas, particularly in Europe.
In 1996, the World Health Organization (WHO) established the
International EMF Project to review the scientific literature and work
towards resolution of health concerns over the use of RF technology.
WHO maintains a Web site that provides extensive information on this
project and about RF biological effects and research
FDA, EPA and other US government agencies responsible for public
health and safety have worked together and in connection with WHO to
monitor developments and identify research needs related to RF
biological effects.
Section 4: Safety Guidelines and Warranty Information
124 4A: Safety
Owner’s Record
The model number, regulatory number and serial number are located on
a nameplate inside the battery compartment. Record the serial number
in the space provided below. This will be helpful if you need to contact us
about your phone in the future.
Model: Nokia 3585
ESN (electronic serial number): 011/011/10101
User Guide Proprietary Notice
CDMA Technology is licensed by QUALCOMM Incorporated under one or
more of the following patents:
4,901,307 5,109,390 5,267,262 5,416,797
5,506,865 5,544,196 5,657,420 5,101,501
5,267,261 5,414,796 5,504,773 5,535,239
5,600,754 5,778,338 5,228,054 5,337,338
5,710,784 5,056,109 5,568,483 5,659,569
5,490,165 5,511,073
T9 Text Input is licensed by Tegic Communications and is covered by
U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other
patents pending. T9 text input software Copyright © 1999-2001. Tegic
Communications, Inc. All rights reserved.
Manufactured or sold under one or more of the following US
patents:
D405445 5444816 5737323 5821891 5990740 6055264 6154455
D406583 5491718 5754976 5854978 5991627 6072787 6167083
4558302 D414189 5596571 5758278 5859843 6005889 6076181
6205325 4901307 D405784 5642377 5790957 5887250 6009129
6078570 6253075 5056109 D423515 5699482 5793744 5887252
6025802 6084471 6292474 5101501 4969192 5701392 5796757
5889770 6029065 6088342 5109390 5440597 5708656 5802465
5929813 6047071 6148290 5265119
Section 4: Safety Guidelines and Warranty Information
4A: Safety 125
RE32580
Receive accessibility information
Nokia is committed to making mobile phones easy to use for all
individuals, including those with disabilities. For more information, visit
the Nokia World Wide Web site www.nokiaaccessibility.com.
Text Telephone (TTY) and Teletype Device for the Deaf (TDD) device
compatibility
Your Nokia phone is equipped with a universal 2.5mm accessory jack
that can be used to connect any “cellular ready” or “cellular
compatible” TTY/TDD device’s cable to your phone.
Once your TTY/TDD device is connected to your phone, you must use
the phone’s menu (Menu - Settings - Accessory - TTY) to enable the
TTY/TDD mode.
Section 4: Safety Guidelines and Warranty Information
126 4A: Safety
Section 4: Safety Guidelines and Warranty Information
4A: Safety 127
Section 4: Safety Guidelines and Warranty Information
128 4A: Safety
Section 4B
Manufacturer’s Warranty
In This Section
ᮣ
Manufacturer’s Warranty
his section contains the manufacturer’s warranty for your PCS Phone.
For information about the Terms and Conditions of your PCS Service,
please see the Start Here guide included with your phone. For the most
T
Section 4: Safety Guidelines and Warranty Information
4B: Manufacturer’s Warranty 127
Manufacturer’s Warranty
Nokia One-Year Limited Warranty
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from
defects in material and workmanship that result in Product failure during normal
usage, according to the following terms and conditions:
1
The limited warranty for the Product extends for ONE (1) year beginning on the
date of the purchase of the Product. This 1-year period is extended by each
whole day that the Product is out of your possession for repair under this
warranty.
2
The limited warranty extends only to the original purchaser (“Consumer”) of the
Product and is not assignable or transferable to any subsequent purchaser/end-
user.
3
4
The limited warranty extends only to Consumers who purchase the Product in
the United States of America and in Puerto Rico.
During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole
option, any defective parts, or any parts that will not properly operate for their
intended use with new or refurbished replacement items if such repair or
replacement is needed because of product malfunction or failure during
normal usage. No charge will be made to the Consumer for any such parts.
Nokia will also pay for the labor charges incurred by Nokia in repairing or
replacing the defective parts. The limited warranty does not cover defects in
appearance, cosmetic, decorative or structural items, including framing, and
any non-operative parts. Nokia’s limit of liability under the limited warranty
shall be the actual cash value of the Product at the time the Consumer returns
the Product for repair, determined by the price paid by the Consumer for the
Product less a reasonable amount for usage. Nokia shall not be liable for any
other losses or damages. These remedies are the Consumer’s exclusive remedies
for breach of warranty.
5
6
Upon request from Nokia, the Consumer must prove the date of the original
purchase of the Product by a dated bill of sale or dated itemized receipt.
The Consumer shall bear the cost of shipping the Product to Nokia in
Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to
the Consumer after the completion of service under this limited warranty.
7
The Consumer shall have no coverage or benefits under this limited warranty
if any of the following conditions are applicable:
a) The Product has been subjected to abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness, unauthorized
modifications, unauthorized connections, unauthorized repair, misuse,
Section 4: Safety Guidelines and Warranty Information
128 4B: Manufacturer’s Warranty
neglect, abuse, accident, alteration, improper installation, or other acts
which are not the fault of Nokia, including damage caused by shipping.
b) The Product has been damaged from external causes such as collision
with an object, or from fire, flooding, sand, dirt, windstorm, lightning,
earthquake or damage from exposure to weather conditions, an Act of
God, or battery leakage, theft, blown fuse, or improper use of any electrical
source, damage caused by computer or internet viruses, bugs, worms,
Trojan Horses, cancelbots or damage caused by the connection to other
products not recommended for interconnection by Nokia.
c) Nokia was not advised in writing by the Consumer of the alleged defect or
malfunction of the Product within fourteen (14) days after the expiration
of the applicable limited warranty period.
d) The Product serial number plate or the accessory data code has been
removed, defaced or altered.
e) The defect or damage was caused by the defective function of the cellular
system or by inadequate signal reception by the external antenna, or
viruses or other software problems introduced into the Product.
8
Nokia does not warrant uninterrupted or error-free operation of the Product. If
a problem develops during the limited warranty period, the Consumer shall
take the following step-by-step procedure:
a) The Consumer shall return the Product to the place of purchase for repair
or replacement processing.
b) If “a” is not convenient because of distance (more than 50 miles) or for
other good cause, the Consumer shall ship the Product prepaid and
insured to:
Nokia Inc., Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL 32901
c) The Consumer shall include a return address, daytime phone number
and/or fax number, complete description of the problem, proof of
purchase and service agreement (if applicable). Expenses related to
removing the Product from an installation are not covered under this
limited warranty.
d) The Consumer will be billed for any parts or labor charges not covered by this
limited warranty. The Consumer will be responsible for any expenses related
to reinstallation of the Product.
e) Nokia will repair the Product under the limited warranty within 30 days
after receipt of the Product. If Nokia cannot perform repairs covered under
this limited warranty within 30 days, or after a reasonable number of
Section 4: Safety Guidelines and Warranty Information
4B: Manufacturer’s Warranty 129
attempts to repair the same defect, Nokia at its option, will provide a
replacement Product or refund the purchase price of the Product less a
reasonable amount for usage. In some states the Consumer may have the
right to a loaner if the repair of the Product takes more than ten (10) days.
Please contact the Customer Service Center at Nokia at the telephone
number listed at the end of this warranty if you need a loaner and the
repair of the Product has taken or is estimated to take more than ten (10)
days.
f) If the Product is returned during the limited warranty period, but the
problem with the Product is not covered under the terms and conditions
of this limited warranty, the Consumer will be notified and given an
estimate of the charges the Consumer must pay to have the Product
repaired, with all shipping charges billed to the Consumer. If the estimate
is refused, the Product will be returned freight collect. If the Product is
returned after the expiration of the limited warranty period, Nokia’s
normal service policies shall apply and the Consumer will be responsible for
all shipping charges.
9
You (the Consumer) understand that the product may consist of refurbished
equipment that contains used components, some of which have been
reprocessed. The used components comply with Product performance and
reliability specifications.
10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A
PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF
THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE
FOREGOING LIMITED WARRANTY IS THE CONSUMER’S SOLE AND
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL,
PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED
TO LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR
REVENUE, LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF USE OF THE
PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF
ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF
ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY,
RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING
FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE,
STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF
NOKIA KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT
BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED
WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS
BEING REPAIRED.
11 Some states do not allow limitation of how long an implied warranty lasts, so
130
the 1-year warranty limitation may not apply to you (the Consumer). Some
states do not allow the exclusion or limitation of incidental and consequential
damages, so certain of the above limitations or exclusions may not apply to you
(the Consumer). This limited warranty gives the Consumer specific legal rights
and the Consumer may also have other rights which vary from state to state.
12 Nokia neither assumes nor authorizes any authorized service center or any
other person or entity to assume for it any other obligation or liability beyond
that which is expressly provided for in this limited warranty including the
provider or seller of any extended warranty or service agreement.
13 This is the entire warranty between Nokia and the Consumer, and supersedes all
prior and contemporaneous agreements or understandings, oral or written,
relating to the Product, and no representation, promise or condition not
contained herein shall modify these terms.
14 This limited warranty allocates the risk of failure of the Product between the
Consumer and Nokia. The allocation is recognized by the Consumer and is
reflected in the purchase price.
15 Any action or lawsuit for breach of warranty must be commenced within
eighteen (18) months following purchase of the Product.
16 Questions concerning this limited warranty may be directed to:
Nokia Inc.
Attn: Customer Service
7725 Woodland Center Blvd., Ste. 150
Tampa, FL 33614
Telephone: 1-888-NOKIA-2U (1-888-665-4228)
Facsimile: (813) 287-6612
TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)
17 The limited warranty period for Nokia supplied attachments and accessories is
specifically defined within their own warranty cards and packaging.
Section 4: Safety Guidelines and Warranty Information
4B: Manufacturer’s Warranty 131
Section 4: Safety Guidelines and Warranty Information
132 4B: Manufacturer’s Warranty
activating 85
deactivating 85
call guard
40
placing roaming calls 40
turning On and Off 40
call logs
deleting a call 59
making a call 57
options 56
saving a number 58
using a number 57
Index
Numerics
1-Touch Dialing 21
911 23
A
accessing security menu 32
activating call forwarding 85
activating phone 8
adapter plug 15
adding a new phone book entry 69
adding words to T9 database 63
additional features 87
adjusting screen brightness 29
alarm indicator 16
alert notification 28
allowed numbers when phone
locked 34
viewing 56
viewing a number 57
viewing time of a call 57
call options 24
call waiting
responding 84
answering calls 22
antenna 15
caller ID 83
calling in lock mode 33
call-in-progress indicator 16
changing lock code 32
characters 68
consumer information on wire-
less phones 106
controlling phone settings 25
controlling roaming charges 40
customer service 9
customizing display banner 29
customizing profiles 26
customizing ringing tones 27
customizing Welcome note 29
automated invoicing 10
B
banner 29
battery
capacity 18
care 102
charger 20
charging 20
installation 19
removal 19
using charger 18
battery strength indicator 15
brightness 29
C
D
calculator 65
calendar
deactivating call forwarding 85
deleting events 64
dialing options 23
digital roaming indicator 16
directory assistance 10
display banner 29
display screen 15
adding a memo 62
adding a reminder 62
alerts 63
today’s menu 64
call forwarding 85
Index 133
L
displaying your phone number 21
left/right selection keys 15
lock code 32
lock mode 33
locking phone 32
locking, unlocking keypad 32
E
earpiece 15
Emergency numbers 23
end call key 15
end-of-call options 24
entering characters 68
entering numbers and symbols 69
events
M
main menu diagram 42
making a three-way call 84
making and answering calls 21
making calls 21
Managing Call Logs 55
managing call logs 55
manufacturer’s warranty 127
memos 62
options 76
menu diagram
Games 51
deleting 64
options 63
viewing options 64
F
factory settings 35
FCC Notice 103
features 17
four-way navigation keys 15
front view of phone 14
G
games 65
Organizer 43
customizing 89
playing 89
getting help 9
getting started 5
Phone details 51
Profiles 45
Settings 46
menu navigation 41
menu structure 41
menus 41
navigation 42
reviewing 42
structure 42
H
handsfree indicator 16
headset indicator 16
Help 9
I
menus overview 41
microphone 15
missed calls 23
icons 16
Internal Phone Book 67
menu diagram 51
introduction to user guide 3
invoicing
N
navigating menus 41
navigation keys, four-way 15
Nokia one-year limited warranty
128
automated 10
K
Nokia Pop-Port accessory con-
nector 15
Keyguard indicator 16
keypad
locking, unlocking 33
O
Off 18
134 Index
On 17
recorded memos
deleting 76
recording memos 75
reminder 62
removing call restrictions 34
restoring factory settings 35
restricting calls 33
ringing tones 27, 88
purchasing 88
ringing tones for messages 28
roaming 37
analog networks 38
charges 40
controlling charges 40
indicator 38
other digital networks 38
setting mode 39
understanding 38
On/Off button 15
operator services 10
own number 51
owner’s record 124
P
PCS
activating service 8
Customer Solutions 9
directory assistance 10
making a call 93
operator services 10
service features, the basics 79
PCS phone
the basics 13
PCS Services
dialing 72
PCS Voice Command 91
creating an address book 92
Personal Organizer 61
phone basics 13
phone book
adding a new number to exist-
ing entry 70
S
safety
using and accessing phone 99
safety guidelines/warranty infor-
mation 95
screen brightness 29
screen icons 16
screen symbols 16
security
menu 32
adding a number to 70
deleting 72
editing a name 71
editing a number 71
entry options 68
settings 31
finding entries 70
menu diagram, Names 51
new entries 69
selecting a character input 68
selecting a ringing tone 71
phone features 17
phone settings 25
predictive text indicator 16
profiles
selecting profiles 26
selecting ringing tones 28
selection keys 15
setting phone security 31
setting up service 7
setting up voicemail 9
settings 25
signal indicator 15
Silence profile indicator 16
silencing your phone 26
silent mode 29
customizing 26
selecting 26
speaker port 15
speed dialing 21
Sprint Web site
R
reception 98
Index 135
home address 9
switching phone Off 18
switching phone On 17
symbols 16
reply 82
volume adjustment 27
W
warranty
Nokia’s 127
T
T9 62
Sprint’s 95
T9 Text Input
database 63
entering characters 62
talk key 15
warranty information 95
welcome note in phone 29
Welcome to Sprint 1
whip antenna 15
three-way calling 84
Y
U
your phone number 21
universal headset jack 15
unlocking phone 8, 32
user guide proprietary notice 125
V
vibrating alert indicator 16
voice
dialing 74
voice command
assigning a number 74
making a call 74
voice services 73
voice tags
changing 75
deleting 75
voicemail
clearing screen indicator 83
distribution lists 82
extended greeting 83
indicator 16
message alerts 80
notification 80
options 81
retrieving 81
return a call 82
setting up 9, 80
using 80
voicemail-to-voicemail
forwarding 82
message 82
receipt request 83
136 Index
|