Nokia 3155 User Guide
i
Contents
For your safety ...................................... vi
About your device ............................... vii
Network Services................................. vii
Shared memory................................... viii
Phone at a glance.................................. 1
Keys and parts........................................ 1
Standby mode......................................... 2
Quick keys................................................ 2
Indicators and icons ............................. 2
Get the most out of this guide.......... 3
Phone menus .......................................... 3
Scroll method...................................... 4
In-phone help...................................... 4
Security feature ..................................... 4
Go to functions...................................... 5
Choose Go to functions.................... 5
Organise functions............................. 5
Numbers (123).................................. 13
Punctuation and
special characters............................ 13
Predictive text mode .......................... 13
Change case and mode...................... 14
Read message ................................... 17
Reply to message............................. 17
Templates........................................... 18
Text message folders....................... 18
Distribution list................................. 19
Delete messages............................... 19
Change sending options................. 20
Change message settings.............. 20
Picture messages................................. 21
Receive and save.............................. 21
Compose and send........................... 21
Multimedia messages......................... 22
MMS settings.................................... 23
Voice messages.................................... 27
Save voice mailbox number.......... 27
Call and setup voice mail .............. 27
Listen to voice messages ............... 27
Automate voice mail....................... 27
Clear voice mail icon....................... 29
Web messaging.................................... 29
Set up your phone................................. 6
Antenna.................................................... 6
Battery...................................................... 6
Remove the back cover .................... 7
Remove the battery........................... 7
UIM card slot....................................... 7
Replace the battery........................... 7
Replace the back cover .................... 8
Charge the battery............................. 8
Turn your phone on or off................... 9
Connect the headset ............................ 9
Make a call.............................................. 9
Keypad................................................... 9
Contacts list....................................... 10
Last dialled number......................... 10
Conference calling........................... 10
Answer calls.......................................... 10
An incoming call .............................. 10
Adjust the earpiece volume .......... 11
Answer a call with the
keypad locked.................................... 11
Copyright © 2005 Nokia. All rights reserved.
iii
Call register .......................................... 30 Settings.................................................. 46
View missed calls................................ 30 Profiles................................................... 46
View received calls ............................. 30
View dialled numbers......................... 31
View call times................................. 31 Tone settings........................................ 47
Delete call registers............................ 31 Themes................................................... 47
Call duration......................................... 31 Main display settings......................... 47
Data and fax call duration ............... 32
Minibrowser duration........................ 32
Colour schemes................................ 48
Mini display settings.......................... 48
Open fold to answer....................... 50
Calling card....................................... 50
International prefix......................... 51
Data or fax calls............................... 51
Call summary.................................... 51
Ringing tone for no caller ID........ 51
Phone settings..................................... 52
Phone language ............................... 52
Memory status ................................. 52
Automatic keyguard ....................... 52
DTMF tones ....................................... 52
Start-up tone.................................... 53
Help text activation........................ 53
Voice commands................................. 53
Hands-free operation..................... 53
Enhancement settings....................... 54
Headset .............................................. 54
Hands-free operation..................... 54
Loopset............................................... 55
Contacts................................................. 34
Add new contacts............................... 34
Save contact name and number. 34
Save contact number only............ 34
Save an entry.................................... 34
Save numbers and text items ...... 34
Change default number................. 35
Caller groups..................................... 35
Set up speed dial ............................. 35
Voice tags.............................................. 36
Assign a voice tag to an entry..... 36
Dial a number................................... 36
Voice tags .......................................... 37
Edit contacts list entries................... 37
Delete contacts entries ..................... 38
Access the contacts menu................ 38
Search for a name........................... 38
Configure settings........................... 38
Send and receive contacts ............... 39
Send a business card...................... 39
Gallery.................................................... 40
Folders.................................................... 40
Media...................................................... 42
Media player......................................... 42
Radio....................................................... 42
Turn the radio on and off.............. 42
Voice recorder...................................... 43
Record speech or sound................. 44
Options............................................... 44
Media equaliser................................... 44
Activate an equaliser set............... 44
Copyright © 2005 Nokia. All rights reserved.
iv
Charger................................................ 55
Security settings.................................. 55
Phone lock.......................................... 55
Allow numbers.................................. 56
Change lock code............................. 56
Call restrictions................................. 57
Voice privacy ..................................... 57
Application settings............................ 58
Network.................................................. 58
Roaming options .............................. 58
Mode.................................................... 58
Network services.................................. 59
Store a feature code........................ 59
Call diverting..................................... 59
Restore factory settings..................... 60
Sign on ................................................... 71
Organiser................................................ 61
Alarm clock............................................ 61
Set or change alarm setting ......... 61
Repeat alarm..................................... 61
Set the alarm tone........................... 61
Snooze time-out .............................. 61
Alarm conditions.............................. 61
Turn an alarm off............................. 62 Enhancements...................................... 75
Calendar................................................. 62
Battery information............................ 76
Open..................................................... 62
Charging and discharging................. 76
Go to a date....................................... 62
Nokia battery authentication
guidelines............................................... 77
Note a specific date ........................ 62
View notes (day view)..................... 62
Options while viewing
a list of notes .................................... 63
Send a note........................................ 63
Operating environment...................... 80
Notes....................................................... 64
Medical devices.................................... 80
To-do list................................................ 64
Care and maintenance....................... 79
Additional safety informatsion........ 80
Vehicles .................................................. 81
Potentially explosive
Add a to-do note.............................. 64
Calculator .............................................. 65
environments........................................ 81
Currency converter.......................... 66
Emergency calls ................................... 82
Countdown timer ................................ 66
Certification information (SAR) ...... 82
Index ....................................................... 84
Set the timer ..................................... 66
Change the time............................... 67
Interrupt the timer .......................... 67
Stopwatch ............................................. 67
Copyright © 2005 Nokia. All rights reserved.
v
F o r y o u r s a f e t y
For your safety
SWITCH OFF NEAR BLASTING
Follow any restrictions.
Don't use the device where
blasting is in progress.
Read these simple guidelines.
Not following them may be dangerous
or illegal. Read the complete user
guide for further information.
USE SENSIBLY
Use only in the normal
SWITCH ON SAFELY
Do not switch the device on
position as explained in the
product documentation.
Don't touch the antenna
unnecessarily.
when wireless phone use is
prohibited or when it may
cause interference or
danger.
QUALIFIED SERVICE
Only qualified personnel
may install or repair this
product.
ROAD SAFETY COMES FIRST
Obey all local laws. Always
keep your hands free to
operate the vehicle while
driving. Your first
consideration while driving
should be road safety.
ENHANCEMENTS AND
BATTERIES
Use only approved
enhancements and
batteries. Do not connect
incompatible products.
INTERFERENCE
Do not switch the device on
when wireless phone use is
prohibited or when it may
cause interference or
danger.
WATER-RESISTANCE
Your phone is not water-
resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-
SWITCH OFF IN HOSPITALS
Follow any restrictions.
up copies or keep a written
record of all important
information.
Switch the device off near
medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions.
Wireless devices can cause
interference in aircraft.
CONNECTING TO OTHER
DEVICES
When connecting to any
other device, read its user
guide for detailed safety
instructions. Do not
connect incompatible
products.
SWITCH OFF WHEN
REFUELLING
Don't use the device at a
refuelling point. Don't use
near fuel or chemicals.
Copyright © 2005 Nokia. All rights reserved.
vi
F o r y o u r s a f e t y
EMERGENCY CALLS
Ensure the device is
■ Network Services
To use the device you must have
service from a wireless service provider
or network operator. Many of the
features in this device depend on
features in the wireless network to
function. These network services may
not be available on all networks or you
may have to make specific
arrangements with your service
provider before you can utilise them.
Your service provider may need to give
you additional instructions for their
use and explain what charges will
apply. Some networks may have
limitations that affect how you can
use network services. For instance,
some networks may not support all
language-dependent characters
and services.
switched on and in service.
Press the end key as many
times as needed to clear the
display and return to the
main screen. Enter the
emergency number, then
press the call key. Give your
location. Do not end the
call until given permission
to do so.
■ About your device
The wireless devices described in this
guide are approved for use on the
CDMA 800 and 1900 and AMPS
networks. Contact your service
provider for more information
about networks.
When using the features in this device, Your service provider may have
obey all laws and respect privacy and
the legitimate rights of others.
requested that certain features be
disabled or not activated in your
device. If so, they will not appear on
your device menu. Contact your service
provider for more information.
Warning: To use any features
in this device, other than the
alarm clock, the device must
be switched on. Do not switch
the device on when wireless
phone use may cause
interference or danger.
Copyright © 2005 Nokia. All rights reserved.
vii
F o r y o u r s a f e t y
■ Shared memory
The following device features may
share memory: contacts; text
messages; photos, images, and tones in
gallery; calendar notes; games; and
applications. Use of one or more of
these features may reduce the memory
available for the remaining features
sharing memory. If your phone displays
a message that the memory is full
when you try to use a shared memory
feature, delete some of the
information or entries stored in the
shared memory features before
continuing. Some of the features,
such as photos, images, and tones
in gallery; text messages; and
applications may have a certain
amount of memory specially allotted
to them in addition to the memory
shared with other features.
Copyright © 2005 Nokia. All rights reserved.
viii
P h o n e a t
a
g l a n c e
1. Phone at a glance
•
Right selection key (7)
Power key/end key (8)
Charger port (9)
•
•
•
•
Pop-Port™ connector (10)
Microphone (11)
■ Keys and parts
•
•
•
•
•
Loudspeaker (1)
Voice key (2)
Volume key (3)
Front display (4)
Headset jack (5)
The voice key functions as follows:
•
•
•
•
•
•
Earpiece port (1)
Display screen (2)
Left selection key (3)
Call key (4)
•
Press once (Short press)—Answer
an incoming call.
•
Press and hold (Long press)—
Answer or make a voice dialling.
Keypad (5)
Four-way scroll and
selection key (6)
Copyright © 2005 Nokia. All rights reserved.
1
P h o n e a t
a
g l a n c e
In standby mode, the four-way scroll
key instantly takes you to
frequentlyaccessed menus:
■ Standby mode
Depending on your wireless service
provider or network operator and the
model number of your phone, some or
Scroll up key—Go to the contacts list.
all of the following selection keys may Scroll right key—View the calendar.
appear in standby mode.
Scroll down key—Go to the contacts
The standby mode is home base and
indicates your phone is in the idle
state..
list.
Scroll left key—Quickly create a text
message.
Centre selection key—Go to the main
menu or a selected submenu.
■ Indicators and icons
Depending on your wireless service
provider or network operator and the
model number of your phone, some or
all of the following indicators and
icons may appear in standby mode.
Signal strength (1)—A higher bar
indicates a stronger network signal.
Menu (2)—Press the centre selection
You have new text or picture
key to select this option.
messages. See "Text messages," p. 15.
Go to (3)—Press the left selection key
to select this option.
You have new voice messages.
See "Voice messages," p. 27.
Names or network operator menu (4)—
Press the right selection key to select
this option.
Your phone keypad is locked. See
"Keyguard," p. 12.
Your phone is set to the silent
profile. See "Profiles," p. 46.
Battery level (5)—A higher bar
indicates more power in the battery.
The alarm clock is set to on. See
"Alarm clock," p. 61.
■ Quick keys
The countdown timer is running.
Note: Depending on your
The stopwatch timer is running in
the background.
wireless service provider or
network operator or network
operator and the model
number of your phone, some or
all of the following Quick keys
may appear in standby mode.
Integrated hands-free is active.
See "Loudspeaker," p. 11.
The timed profile is selected. See
"Profiles," p. 46.
Copyright © 2005 Nokia. All rights reserved.
2
P h o n e a t
a
g l a n c e
or
An enhancement is
•
Use selection keys to select a menu
option. To select an option, press
the selection key below the menu
item on the phone screen.
connected to the phone. See
"Enhancement settings," p. 54.
Voice privacy encryption is active
(or is not active) in the network.
•
•
Use scroll keys to move up, down,
left, or right in the menus.
You are in a digital network. See
"Network Services," p. vii.
Call and end keys: Press the call key
to place a call or to answer an
incoming call. Press the end key to
end a call or return to the idle state
(standby mode).
You are in an analogue network.
See "Network Services," p. vii.
You are in a 1XRTT network. See
"Network Services," p. vii.
You are roaming outside your
home network. See "Roaming options,"
p. 58.
■ Phone menus
Phone features are grouped according
to function and are accessed through
the main menus. Each main menu
contains submenus and lists from
which you can select or view items and
personalise your phone features.
■ Get the most out of
this guide
The following sections illustrate the
various components of your phone.
Familiarise yourself with these
sections to help you understand the
instructions that follow.
To access these menus and submenus,
use the scroll method or a shortcut.
You can change your menu view from
list to grid. Select Menu > Options >
Main menu view > List or Grid.
This guide uses certain terms for the
steps you need to perform.
•
Press means to press and release a
key quickly (short press). For
example, press 7 means press the
key on the keypad labeled with the
number 7 and the letters pqrs.
Note: Some features may not
be available, depending on
your network. For more
information, contact your
wireless service provider or
network operator.
•
Press and hold means to press and
hold a key for 2–3 seconds; then
release the key (long press).
Copyright © 2005 Nokia. All rights reserved.
3
P h o n e a t
a
g l a n c e
Scroll method
In-phone help
You can use the four-way
scroll key to scroll up,
down, left, and right
through the options.
Many features have brief descriptions
(help text) you can view on the display.
To view these descriptions, you must
first activate help text as follows.
1. In standby mode, select Menu,
and scroll through the main menus
using the scroll key.
In standby mode, select Menu >
Settings > Phone > Help text
activation > On or Off.
Scroll to a feature and wait about 14
seconds. Scroll down to view all of the
description, or select Back to exit.
As you scroll through the menus,
the menu number appears in the
upper right corner of the display.
Below the battery level indicator is
a scroll bar with a tab that moves
■ Security feature
up or down on the right side of the The security feature protects your
device from unauthorised outgoing
calls or access to the stored
display screen as you scroll through
the menus, providing a visual
representation of your current
position in the menu structure.
information with the lock and security
codes. The lock code and security code
are both preset to 12345. By default,
the security feature uses the lock code
(defaulted to the last four digits of
your phone number) instead of the
security code to protect your phone.
2. When you arrive at a menu, press
the centre selection key to select
submenus.
•
Select Back (the right selection
key) to return to the previous
menu.
You need to enter the lock code to
access the following Security option:
1. In standby mode, select Menu >
•
Press the end key to return to
standby mode from any menu
or submenu.
Settings > Security.
2. Enter the lock code, and select OK.
See "Security settings," p. 55.
Copyright © 2005 Nokia. All rights reserved.
4
P h o n e a t
a
g l a n c e
Your device, by default, requires you to
enter the lock code to restore factory
settings:
Choose Go to functions
1. In standby mode, select Go to >
Options > Select options.
1. In standby mode, select Menu >
2. Scroll up or down to highlight the
desired function.
Settings > Restore factory sett..
2. Enter the security code, and select
3. Select Mark to add a function or
OK. See "Change lock code," p. 56.
Unmark to remove a function.
Note: Depending on your
wireless service provider or
network operator, your device
may sometimes ask you for the
security code (defaulted to
12345) instead of the lock
code.
4. Select Done when you have added
all desired functions.
5. Select Yes to save the changes.
6. In standby mode, select Go to to
display a list of the functions you
selected in step 2.
■ Go to functions
Organise functions
1. In standby mode, select Go to >
The Go to menu enables you to change
the function of the left selection key
on your phone. With this function,
you can quickly access your most
frequently used functions from the Go
to menu in standby mode.
Options > Organise.
2. Scroll up or down to highlight the
function you want to rearrange,
and select Move > Move up, Move
down, Move to top, or Move to
bottom.
3. Select Done > Yes to save the
changes.
Copyright © 2005 Nokia. All rights reserved.
5
S e t u p y o u r p h o n e
2. Set up your phone
■ Antenna
Your device has two
antennas—the fixed
antennais activeunless
theextendableantenna
is fully extended.
Note: Do not touch the
antenna unnecessarily with
the device switched on.
Contact with the antenna
affects call quality and may
cause the device to operate
at a higher power level than
otherwise needed.
Not touching the antenna
area during a phone call
optimises the antenna
performance and battery life.
Your device has a
fixed and
extendable
antenna located
towards the top
of the phone with
the fold closed.
Hold the phone
with the antenna
area pointed up
and over your
■ Battery
shoulder.
Note: Always switch off the
power, and disconnect the
charger and any other device
before removing the cover.
Always store and use
the device with the cover
attached.
Copyright © 2005 Nokia. All rights reserved.
6
S e t u p y o u r p h o n e
Remove the back cover
UIM card slot
1. With the back of the phone facing
you, push down on the back cover.
Your phone has a UIM (CDMA SIM)
card slot built into the mechanics.
However, the UIM is not functional in
this phone model. Avoid placing
anything into the UIM card slot.
2. Slide the back cover toward the
bottom of the phone and remove.
Remove the battery
Replace the battery
1. Insert the battery, gold-coloured
contact end first, into the battery
slot.
After you have removed the back
cover, insert your finger into the finger
grip, and lift the battery from its
compartment.
Note: Always switch off the
device, and disconnect the
charger before removing the
battery.
2. Push down on the other end of the
battery to snap the battery into
place.
Copyright © 2005 Nokia. All rights reserved.
7
S e t u p y o u r p h o n e
After a few seconds, the battery
indicator in the display starts to
scroll from bottom to top. If the
battery is completely
Replace the back cover
discharged,it may take a few
minutes before the charging
indicator appears on the display or
before any calls can be made.
1. Set the back cover on the phone
with the cover tabs aligned with
the slots in the phone.
You can also use the CA-44 charger
adapter to connect the phone with
Nokia chargers having a larger barrel
size, including ACP-7, ACP-8, ACP-9,
ACP-12, AC-1 (retractable charger),
and LCH-12 (mobile charger).
2. Slide the back cover toward the top
of the phone until the back cover is
securely in place.
Charge the battery
Note: Check the model
number of any charger before
use with this device. This
device is intended for use
when supplied with power
from the AC-3 or AC-4
charger.
1. Plug the charger transformer into a
standard AC outlet.
2. Insert the charger output plug into
the CA-44 adapter jack.
1. Plug the charger transformer into a
standard AC outlet.
3. Insert the CA-44 plug into the jack
on the bottom of the phone.
2. Insert the charger output plug into
Warning: Use only batteries,
chargers, and enhancements
approved by Nokia for use
with this particular model.
The use of any other types
may invalidate any approval
or warranty, and may be
dangerous.
the round jack at the bottom end of
the phone.
Copyright © 2005 Nokia. All rights reserved.
8
S e t u p y o u r p h o n e
With the headset connected, you can
make, answer, and end calls as usual.
■ Turn your phone on
or off
•
•
1. To turn your phone on or off, press
and hold the end key on the keypad
for at least 4 seconds.
Press the call key to place a call.
See "Phone at a glance," p. 1.
•
Press the end key to end a call.
2. Enter the lock code, if necessary,
and select OK. See "Change lock
code," p. 56.
Warning: Do not switch the
phone on when wireless
phone use is prohibited or
when it may cause
interference or danger.
■ Connect the headset
You can also plug a compatible
headset, such as the HS-9 Universal
Headset, into the 2.5-mm headset jack
on the right side of your phone to allow
hands-free operation. See
A compatible headset, such as HS-5,
may be purchased with your phone
or separately as an enhancement.
See "Enhancement settings," p. 54.
"Enhancement settings," p. 54.
1. Plug the headset connector into
the Pop-Port connector at the
bottom end of your phone.
■ Make a call
appears in standby mode.
Note: Before making or
receiving a call, fully extend
the whip antenna.
2. Position the headset on your ear.
Keypad
1. Enter the phone number and press
the call key. (To delete a character
to the left of the cursor, select
Clear.)
2. Press the end key to end the call,
or select End call to cancel the call
attempt.
Copyright © 2005 Nokia. All rights reserved.
9
S e t u p y o u r p h o n e
5. To end the conference call, select
Options > End all calls, or press the
end key.
Contacts list
1. In standby mode, scroll down to
display your contacts list and
highlight your desired entry.
■ Answer calls
2. Select Details to highlight your
desired number, and then select
Call.
An incoming call
1. With the fold open, press the call
key, or select Answer to answer the
call.
Last dialled number
1. In standby mode, press the call key
to display the last 30 numbers
dialled.
2. Press the end key to reject the call.
Select Silence to mute the ringing
tone, then Dismiss, or do nothing.
The call is eventually diverted to
voicemail.
2. Scroll to the number (or name) you
want to redial, and press the call
key.
With your phone set to silent in the
profiles menu, select Dismiss to
divert the call to voicemail.
Conference calling
Conference calling is a network
dependant service that allows you to
take part in a conference call with two
other participants.
3. With the fold closed, press the
volume key to mute the ringing
tone.
Note: Conference calling is a
network dependant service.
A short press of the voice key
answers an incoming call with the
loudspeaker.
1. Make a call to the first participant.
2. With the first participant on the
By default, your phone answers an
incoming call when you open the fold.
You can change the setting to not
answer the call when the fold opens.
line, select Options > New call.
3. Enter the phone number of the
second participant, or select
In standby mode, select Menu >
Settings > Call > Answer when fold is
opened > On or Off.
Search to retrieve a number from
the contacts list. Select Call.
The first participant is put on hold.
4. When the second participant picks
up, press the call key to connect
the calls.
Copyright © 2005 Nokia. All rights reserved.
10
S e t u p y o u r p h o n e
You can use your phone as a
loudspeaker during a call.
Adjust the earpiece volume
Whether in or out of a call, you can
scroll the volume key located on the
left side of your device up or down to
adjust the volume of the earpiece.
When you adjust the volume, a bar
chart indicates the volume level.
•
•
To activate the loudspeaker while
in a call with the fold open, select
Loudsp..
To activate the loudspeaker when
answering a call with the fold
closed, press the voice key.
Answer a call with the
keypad locked
To deactivate the loudspeaker
during a call, with the fold open,
select Normal.
To answer a call with the keypad
locked, press the call key with the fold
open. To answer a call with the fold
closed and the keypad locked, press
and hold the voice key to answer with
the loudspeaker. During the call,
all features function as normal. When
you end or reject the call, the keypad
automatically relocks. See "Keyguard,"
p. 12.
The loudspeaker is deactivated
automatically when a call (or a call
attempt) ends or when certain
enhancements are connected.
Call options
Many of the options you can use
during a call are network services.
Check with your wireless service
provider or network operator for
more information.
When the keypad lock is on, calls still
may be possible to the official
emergency number programmed into
your device. Enter the emergency
number, and press the call key.
1. Select Options during a call to
display the following options:
Loudspeaker or Handset—Activate
or deactivate the loudspeaker
while in a call.
Loudspeaker
Warning: Do not hold the
device near your ear when the
loudspeaker is in use, because
the volume may be extremely
loud.
New call—Initiate a conference
call. See "Conference calling,"
p. 10.
Copyright © 2005 Nokia. All rights reserved.
11
S e t u p y o u r p h o n e
Save—Save a number while in a call
to your contacts list. You can
also save a number directly from
the standby screen.
■ Keyguard
With keyguard, you can lock the
keypad to prevent keys from being
pressed accidentally. The locked
keypad unlocks when you receive a
call. After the call, the lock
Add to contact—Add a phone
number to an existing contact in
your contacts list while in a call.
This option is available only when
entering numbers during a call.
automatically reactivates.
With the keyguard on, calls still may be
possible to the official emergency
number programmed into your phone.
Enter the emergency number, and
press the call key.
End all calls—Disconnect from all
active calls.
Send DTMF—Enter the numbers,
and select DTMF to send the
numbers as tones.
Lock the keypad
Select Menu with the centre selection
Contacts—View the contacts menu. key; then press * within 2 seconds.
Menu—View the phone menu.
Unlock the keypad
2. Scroll to and select an option to
Select Unlock with the centre selection
key; then press * within 2 seconds.
activate the option or enter its
submenu.
Copyright © 2005 Nokia. All rights reserved.
12
T e x t e n t r y
3. Text entry
You can use two methods for entering
text and numbers: standard mode and
predictive text mode.
Numbers (123)
To switch to 123 mode from Abc mode,
press and hold # at any message entry
screen to bring up the Editor settings
menu list of Number mode, Dictionary
on or Dictionary off, and Writing
language. Select Number mode, and
the device returns to the message
entry screen and switches the Abc icon
in the upper left corner of the display
to the 123 icon (or back).
Select Clear to backspace the cursor
and delete a character. Select and hold
Clear to backspace continuously and
delete characters.
■ Standard mode
Standard mode is the only way to enter
text into the contacts list and to
rename caller groups.
Punctuation and special
characters
Text (Abc)
While at any text entry screen, press *
to display special characters (press and
hold * if predictive text is on). Press *
again to cycle through all available
characters. Scroll to navigate through
the list of special characters. With a
character highlighted, select Use to
insert the character into your message.
•
Press a key once to insert the first
letter on the key, twice for the
second letter, etc. If you pause
briefly, the last letter in the display
is accepted and your device awaits
the next entry.
•
•
•
•
Press 0 to enter a space, thereby
accepting a completed word.
■ Predictive text mode
Press 1 to insert a period into your
message.
Much faster than the standard mode
method, predictive text input enables
you to write messages quickly using
your keypad and the built-in
Press * to display a complete list of
special characters.
Press and hold # to bring up the
Editor settings (Number mode,
Dictionary on or Dictionary off,
Writing language).
dictionary. In predictive text mode,
your phone predicts the words as you
enter them.
Copyright © 2005 Nokia. All rights reserved.
13
T e x t e n t r y
Activate or deactivate
1. At any text entry screen, select
Options > Dictionary on to activate
or Dictionary off to deactivate.
■ Change case and
mode
Press # to switch between uppercase,
lowercase, and sentence case text.
As you press #, the following icons
(not the descriptions) appear in the
upper left of the display screen:.
Text entry
The following illustration shows your
text entry of the word Nokia in
predictive text mode. With the English
dictionary selected, press each of the
following number keys once, and the
screen will display Nokia by predicting
the appropriate letter to use based on
your keypad entry:
Uppercase text: standard
mode is on.
Lowercase text: standard
mode is on.
Sentence case text:
standard mode is on. This option is
available only at the beginning of a
sentence.
Enter:
6
6
5
4
2
Note: You can press # within
2 seconds to switch between
standard mode and predictive
text mode.
•
•
Press 0 to enter a space, and begin
writing the next word.
Uppercase text: predictive
text is on.
If a displayed word is not correct,
press * to see other matches. To
return to the previous word in the
list of matches, select Prev.
Lowercase text: predictive
text is on.
Sentence case text:
predictive text is on. This option is
available only at the beginning of a
sentence.
•
If ? appears after a word, select
Spell to add the word to the
dictionary.
•
•
Press 1 to insert a period into your
message.
Press and hold * to display special
characters. Press * again to cycle
through all available characters.
Copyright © 2005 Nokia. All rights reserved.
14
M e s s a g e s
4. Messages
You can send and receive messages to
compatible phones. You can also send
and receive picture, multimedia, and
e-mail messages if supported by your
service provider. Also, you can make
distribution lists that contain phone
numbers and names from your
Note: When you send a
message, your device may
display Message sent,
indicating your device has sent
the message to the message
centre number programmed
into your device. This is not an
indication that the message
has been received at the
intended destination. For more
details about messaging
services, check with your
service provider.
contacts list. See "Text entry," p. 13.
When composing text, picture, or
multimedia messages, check the
number of characters allowed in the
top right corner of the message. Using
Unicode characters takes up more
space. With Unicode characters in your
message, the indicator may not show
the message length correctly. Before
sending the message, the phone tells
you if the message exceeds the
maximum length allowed for one
message.
■ Text messages
Compose and send
1. In standby mode, select Menu >
Messages > Text messages >
Create message.
Important: Exercise caution
opening messages. Messages
may contain malicious
software or otherwise be
harmful to your device or PC.
To go quickly to Create message,
scroll left in standby mode.
2. Compose and send a message using
the keypad.
Depending on the messaging
service enabled, some or all of the
following options are available
while composing your message:
Preview—Preview the message
when sending a picture message
(only available with a picture
inserted).
Copyright © 2005 Nokia. All rights reserved.
15
M e s s a g e s
Sending options—Mark or Unmark
Exit editor—Exits the message
the sending options of a single
message as Urgent, Delivery
reports, Callback no., or Signature
(not available with a picture
inserted). See "Change sending
options," p. 20.
editor.
Use template—Insert a predefined
template into your message.
Insert smiley—Insert a smiley into
your message.
Insert word or Edit word—Enter or
edit the text of a new word that
might not appear in the predictive
text dictionary (only available with
predictive text on).
Clear text—Erase all the text from
the message editor.
Insert picture—Insert a picture
from a templates folder into your
message.
Insert symbol—Insert a special
character into your message (only
available with predictive text on).
Change picture—Change the
picture in a picture message (only
available with a picture inserted).
Dictionary on or Dictionary off—
Delete picture—Delete the picture
in a picture message (only available
with a picture inserted).
Turn the predictive text on or off.
Matches—View matches in the
dictionary for the word you want to
use (only available with predictive
text on and when the same set of
key strokes can produce multiple
words).
Insert contact—Insert a name from
your contacts list into your
message.
Insert number—Insert a phone
number or find a phone number in
the contacts list.
3. To send the message, select Send to
> Send to number, Send to many, or
Send to distrib. list (if a distribution
list has been created). Enter the
recipient’s phone number or e-mail
address; or select Search to retrieve
a number or e-mail address from
your contacts list, and select OK.
Save—Select Drafts to save the
message in the drafts folder; select
Templates to save the message as
one of your predefined templates
in the templates folder.
Copyright © 2005 Nokia. All rights reserved.
16
M e s s a g e s
Move—Save the message to Templates,
Archive, or a folder you have created.
Read message
When you receive a message, a
Forward—Divert the message to
another phone number or e-mail
address.
notification message and
displayed.
are
1. Select Show to read the message or
Exit to dismiss the notification and
read the message later from your
inbox. See "View saved messages,"
p. 18.
Lock or Unlock—Lock or unlock the
message.
Save picture—Save the picture to
your Templates folder for later use.
You can enter a title for the picture,
and select OK.
2. Scroll up or down to view the
whole message, if necessary.
Rename—Edit the title of the message.
Options
When reading a text message, select
Options to access some or all of the
following options:
Reply to message
1. In standby mode, select Menu >
Messages > Text messages > Inbox
and your desired message, or when
you receive a message, select
Show.
Delete—Discard the message.
Use detail—Access the following three
options:
•
•
Number—Uses or saves the
number. Select Options > Add to
contact, Send message, or Call.
2. Select Reply > Empty screen,
Original text, Template, or one of
the predefined answers; then
compose your reply using the
keypad.
E-mail address—Lists the e-mail
addresses included in the message
(available only if the message
contains an e-mail address). Select
Save to save the email address as a
new phone book entry or Options >
Add to contact or Send message.
3. After creating the reply, select
Send. The sender’s phone number
or e-mail is used as the default.
•
Web address—Displays if a URL is
included in the message.
Copyright © 2005 Nokia. All rights reserved.
17
M e s s a g e s
3. To save the draft of a message you
have created, select Save > Drafts
or Templates.
Templates
Templates are short, prewritten
messages you can recall and insert into
new text messages when you are short
on time.
View saved messages
1. In standby mode, select Menu >
Messages > Text messages.
1. In standby mode, select Menu >
Messages > Text messages >
Create message > Options > Use
template.
2. Select the folder containing the
message you want to view:
Inbox—Automatically stores any
incoming messages.
2. Select your desired template.
3. Select Send to > Send to number,
Send to many, or Send to distrib. list
(with a distribution list created).
Outbox—Stores messages that
have not been sent
Sent items—Stores messages that
have been sent.
4. Enter the recipient’s phone number
select Search to retrieve a number
or e-mail address from your
Drafts—Stores messages created as
drafts.
contacts list; and select Send.
Archive—Stores messages that you
choose to archive, including unread
ones.
A distribution list only contains phone
numbers of recipients and is selected
from a list of predefined groups you
create.
Templates—Stores pictures and
prewritten templates. Preloaded
templates can be edited and
personalised.
Text message folders
Save messages
You can save drafts of messages or
received messages to an existing folder
or to a folder that you have created.
My folders—Allows you to organise
your messages by creating custom
folders and saving some of your
messages here. Select Options >
Add folder, Rename folder, or
Delete folder to add a custom
folder or rename or delete a folder
you have created.
1. Open the received message or
create a new message, and select
Options.
2. To save a received message, select
Move > Archive, Templates, or a
folder you have created.
Copyright © 2005 Nokia. All rights reserved.
18
M e s s a g e s
You can only delete folders created
in my folders; the inbox, sent items,
archive, and templates folders are
protected. When deleting a folder,
you are also deleting all messages
in the folder.
Delete messages
If your message memory is full and you
have more messages waiting at the
network, No space for new text
messages appears in standby mode.
You can do the following:
•
Read some of the unread messages,
and delete them individually.
Distribution lists—Stores created
distribution lists.
•
Delete messages from some of your
folders.
3. When the folder opens, select the
message you want to view.
Delete a single message
1. In standby mode, select Menu >
Messages > Text messages.
Distribution list
The distribution list enables you to
send messages to a group of contacts.
In standby mode, select Menu >
Messages > Text messages >
Distribution lists.
2. Select the folder containing the
message you want to delete.
3. Highlight the message you want
to delete.
To create a distribution list, select New
list with no list created or Options >
Create new list to create additional
lists. To populate your list, select Add
new and a contact from your
contacts list.
4. Select Options > Delete.
5. Select Yes to delete the message or
No to exit.
Delete all messages inder
1. In standby mode, select Menu >
Messages > Text messages > Delete
messages.
To use, rename, or modify a
distribution list, highlight the
distribution list; and select Options >
Send message, Rename list, Clear list,
or Delete list.
2. Select the messages you want
to delete:
All—Deletes all messages in all of
the folders.
All read—Deletes any messages
that have been read in all of the
folders.
Copyright © 2005 Nokia. All rights reserved.
19
M e s s a g e s
All unread—Deletes any messages
Send callback number—Send a callback
number to the recipient. Select Off or
enter your desired phone number to
send to the recipient as a callback
number, and select OK.
that have not been read in all of
the folders.
3. Select and Mark the folders that
have messages you want to delete:
Signature—Select On to create a
signature to send with text messages
or Off to turn this feature off.
Inbox—Deletes all messages from
the inbox folder.
Sent items—Deletes all messages
from the Sent items folder.
To change sending options for one
message, in standby mode, select
Menu > Messages > Text messages >
Create message > Options > Sending
options, and Mark or Unmark the
setting you want to change:
Outbox—Deletes all messages from
the outbox folder.
Drafts—Deletes all messages from
the drafts folder.
Urgent—Set the priority of the note as
urgent.
Archive—Deletes all messages from
the archive folder.
Delivery reports—Send a note to
yourself confirming delivery of the
message.
User defined folders—Deletes all
messages from the user defined
folder.
Send callback number—Enter your
desired phone number to send to the
recipient as a callback number, and
select OK.
4. Select Done > Yes to empty the
marked folder.
Signature—Create a signature to send
Change sending options
with text messages.
To change sending options for all
future text messages, in standby mode,
select Menu > Messages > Text
messages > Message settings >
Sending options and the setting you
want to change:
Change message settings
In standby mode, select Menu >
Messages > Text messages > Message
settings > Other settings and the
setting you want to change:
Priority—Set the priority of the note as
Normal or Urgent.
Message font size—Select Small font or
Large font.
Delivery reports—Send a note to
yourself confirming delivery of the
message. Select On or Off.
Message overwriting—Select Sent
items only, Inbox only, S. items & Inbox,
or Off.
Copyright © 2005 Nokia. All rights reserved.
20
M e s s a g e s
Note: When the message
memory is full, your phone
cannot send or receive any
new messages. To free up the
memory, you can select
Message overwriting to make
your phone automatically
replace old messages in the
inbox and outbox folders when
new ones arrive.
Receive and save
Note: Only compatible devices
that offer picture message
features can receive and
display picture messages.
When you have unopened picture
messages in your inbox,
appears.
Select Show to view the picture
message or Exit to view the picture
message in your inbox later. If you
have more than one picture message,
scroll to and select the message you
want to view. Scroll to view the whole
picture if necessary.
Save sent messages—Select Always
save, Always prompt, or Off.
Queue msgs. when digital
unavailable—Select On, On prompt, or
Off. Messages are stored in the outbox
until they can be sent with digital
service.
To save a received picture in your
templates folder, select Options > Save
picture. Enter a title, and select OK. If
your templates folder is full of pictures,
scroll to and select a picture you want
■ Picture messages
Your phone comes with five preloaded to replace.
pictures. If necessary, you can
overwrite any of the preloaded
Compose and send
pictures. You can send a text message
with pictures attached to compatible
phones. However, pictures take up
more space than text.
When you insert a standard picture
into a message, the number of
characters you can add changes as
shown in the upper right corner of the
display screen.
To select your desired picture in the
templates folder, in standby mode,
select Menu > Messages > Text
messages > Templates.
1. In standby mode, select Menu >
Messages > Text messages >
Create message.
You cannot send a picture message
using e-mail.
2. Write the message, and select
Options > Insert picture.
3. Scroll to a picture, and select Use
or View > Insert.
To replace with another picture,
select Options > Change picture,
Copyright © 2005 Nokia. All rights reserved.
21
M e s s a g e s
scroll to another picture, and select
Important: Exercise caution
when opening messages.
Messages may contain viruses
or otherwise be harmful to
your device or PC.
Use or View > Insert.
4. Select Send to > Send to number,
Send to many, or Send to distrib. list
if distribution list exists.
Copyright protections may prevent
some images, ringing tones, and other
content from being copied, modified,
transferred, ordiverted. This function is
only available if supported by your
service provider or network operator.
For availability and a subscription to
the multimedia messaging service,
contact your service provider or
network operator.
5. Enter the phone number of the
recipient, or select Search to
retrieve a number from contacts
list.
To view, change, or delete the picture,
select Options > Preview, Change
picture, or Delete picture.
■ Multimedia messages
Note: Only devices that offer
compatible multimedia
message features can receive
and display multimedia
messages. Multimedia
message objects may contain
viruses or otherwise be
harmful to your device or PC.
Do not open any attachment if
unsure of the trustworthiness
of the sender.
A multimedia message (MMS) can
contain text, sound, a picture, and a
video clip. Your device supports
multimedia messages up to 300 KB.
With the maximum size exceeded, the
device may not be able to receive the
message. Depending on your network,
you may receive a message that
includes an Internet address where you
can go to view the multimedia
message. Pictures are scaled to fit the
display area of the device. Your device
has a multimedia message viewer for
playing messages and a multimedia
folder for storing saved messages.
When you save the multimedia
message, you can use the image as a
screen saver or the sound as a ringing
tone unless protected by copyright.
Multimedia messaging supports the
following formats:
•
Picture: JPEG, GIF, animated GIF,
WBMP, BMP, and PNG
•
Sound: SP-MIDI, AAC, AMR audio,
QCELP, and monophonic ringing
tones
•
Video: clips in H.263 format with
SubQCIF image size and AMR audio
The appearance of a multimedia
message may vary depending on the
receiving device.
If a received message contains
unsupported elements, these elements
Copyright © 2005 Nokia. All rights reserved.
22
M e s s a g e s
may be replaced with Object format
not supported.
Allow or block multimedia
reception
You can receive MMS notifications at
anytime; whether you can retrieve
MMS depends, as shown in the
following:
You can choose to receive all
messages, block all messages, or
receive messages only when you are in
the wireless service provider or
network operator’s home network.
•
While in a call or an active
browsing session, you cannot
retrieve multimedia messages.
In standby mode, select Menu >
Messages > Multimedia messages >
Message settings > Allow multimedia
reception and one of the following:
•
While in a standalone application
such as a game or calendar instead
of a browser or voice call, you can
retrieve multimedia messages.
Yes—Allow all incoming messages.
In home network—Allow incoming
messages only if you are in the wireless
service provider or network operator’s
home system. This is a network service.
Check with your service provider for
more information.
MMS settings
Before you can use the multimedia
message feature, you must specify
whether you want to receive message
at all times or only if you are in your
wireless service provider or network
operator’s home system. This is a
network service. Check with your
service provider for more information.
No—Block all incoming messages.
Retrieve or reject multimedia
messages
This setting is unavailable with
multimedia reception blocked.
The default setting of the multimedia
message service is on. The appearance
of a multimedia message may vary
depending on the receiving device.
In standby mode, select Menu >
Messages > Multimedia messages >
Message settings > Incoming multi-
media messages and one of the
following options:
Retrieve—Automatically retrieve all
messages to your inbox.
Retrieve manually—Enable choosing
from a notification whether to retrieve
a message waiting on the network.
Reject—Reject incoming multimedia
messages.
Copyright © 2005 Nokia. All rights reserved.
23
M e s s a g e s
When you receive messages,
still waiting to be transmitted, or failed
Multimedia message received appears. to be sent out.
Sent items—Contains sent multimedia
messages.
Allow or block advertisements
This setting is unavailable with
multimedia reception blocked.
Saved items—Contains saved
multimedia messages that you can
send later.
In standby mode, select Menu >
Messages > Multimedia messages >
Message settings > Allow adverts > Yes
or No.
Delete messages—Deletes messages in
the Inbox, Outbox, Sent items, or Saved
items folder.
Other MMS settings
Write and send multimedia
messages
1. In standby mode, select Menu >
Messages > Multimedia messages
> Create message.
Other multimedia settings include
saving your messages to Sent items.
In standby mode, select Menu >
Messages > Multimedia messages >
Message settings and one of the
following:
2. Enter your message text, and select
Options > Insert > Image, Sound
clip, New sound clip, Video clip,
Slide, Business card, or Calendar
note. The list of available folders in
the Gallery is displayed.
Save sent messages—Select Yes to save
sent multimedia messages to the Sent
items folder or No to discard.
Delivery reports—Select Yes to be
informed if the message was delivered
or No to not be informed.
Selecting Business card displays
your contact lists; selecting
Calendar note shows the calendar.
Scale image down—Select Yes or No to
define whether to scale image down.
Default slide timing—Set the default
time in mm:ss format for each slide in
an MMS to remain on the screen.
3. Open the desired folder; scroll to
the image, sound clip, or video clip;
and select Options > Insert.
MMS folders
The indicator in the message
header shows the available
memory size left for the message.
To use and arrange messages, select
Messages > Multimedia messages and
one of the following:
Copyright protections may prevent
some images, ringing tones, and
other content from being copied,
modified, transferred, or diverted.
Inbox—Contains received multimedia
messages.
Outbox—Contains multimedia
messages which you have sent and are
Copyright © 2005 Nokia. All rights reserved.
24
M e s s a g e s
4. To add a new page or slide to the
message, select Options > Insert >
Slide. This applies only if there is no
video clip in the message
12. To delete an image, slide, video clip,
or sound clip from the message,
select Options > Delete > Image,
Sound clip, Video clip, or Slide.
Each slide can contain text, one
image, and one sound clip. If the
message contains several slides, to
open the desired slide, select
Previous slide, Next slide, or Slide
list.
13. To add a subject to the message,
select Options > More options >
Edit subject, enter a subject, and
select OK.
14. To view the message or slide
presentation before sending it,
select Options > Preview.
You can also add business cards
and calendar notes.
15. To save the message to Saved
5. To set the time interval between
the slides, select Options >Slide
timing. Enter the time interval in
mm:ss format, and select OK.
items, select Options > Save.
16. To send the message, select Send to
> Phone number, E-mail address, or
Many.
6. To move the text to the top or
bottom of the message, select
Options > Place text first or Place
text last (default).
17. Enter the recipient’s number or e-
mail address, or search for it in
contacts, and select OK. The
message is moved to the outbox
folder to be sent.
7. To insert a name from contacts,
select Options > More options >
Insert contact and the desired
name.
It takes more time to send a
multimedia message than a text
message. While sending the
multimedia message, your device
8. To insert a number, select Options
displays the animated indicator
,
> More options > Insert number.
and you can use other functions on the
device. If there is an interruption while
sending the message, the device
9. Enter the number or search for it in
contacts, and select OK.
automatically tries to resend it a few
times. If this fails, the message remains
in the outbox folder, and you can try to
manually resend it later. Check your
outbox folder for unsent messages.
10. To insert a business card, select
Options > Insert > Business card.
11. To insert a calendar note, select
Options > Insert > Calendar note.
Copyright © 2005 Nokia. All rights reserved.
25
M e s s a g e s
Note: When sending
While viewing the message, select Play
to view the entire MMS or Options and
one of the following:
messages, your device may
display Multimedia message
sent, indicating that the
message has been sent to the
message centre number
programmed into your device.
This is not an indication that
the message has been received
at the intended destination.
For more details about
View text—View only the text included
in the message.
Open image, Open sound clip, or Open
video clip—View or listen to the
corresponding file.
Delete message—Delete the message
you are viewing.
messaging services, check with
your network operator.
Forward to no., Forward to e-mail, or
Forward to many—Divert the message
to a phone number, to an e–mail
address, or to multiple recipients.
Sent messages are saved in the sent
items folder if you set Save sent
messages to Yes. See "Other MMS
settings," p. 24. This is not an
indication that the message has been
received at the intended destination.
Message details—View the sender’s
name and phone number, the message
centre used, reception date and time,
and message size and type.
Save image, Save sound clip, or Save
video clip—Save the file to the Gallery.
You must open images, sound clips,
and video clips before you can save
them.
Read multimedia messages
When a multimedia message is being
received,
appears animated in the
display along with the percentage
display indicating the receiving
progress. With the message fully
If
blinks and Multimedia me-mory
downloaded,
appears, and the
full. view waiting msg. appears,
memory for multimedia messages is
full. To view the waiting message,
select Show. Before you can save the
message, delete some of your old
messages. See "Delete messages,"
p. 19.
number of messages received also
shows in the display (with the light
indicator blinking near the bottom of
your antenna).
•
To view the message immediately,
select Show.
Reply to multimedia message
Select Reply or Reply to all to enter a
reply and send it to the original sender
and any other message recipients.
•
To view a saved message, select
Menu > Messages > Multimedia
messages > Saved items, and scroll
to view the message.
Copyright © 2005 Nokia. All rights reserved.
26
M e s s a g e s
Call and setup voice mail
1. After you save the voice mailbox
number, in standby mode,
press and hold 1.
■ Voice messages
If you subscribe to voice mail, your
wireless service provider or network
operator will furnish you with a voice
mailbox number. You need to save this
number to your device to use voice
mail. When you receive a voice
message, your device beeps, displays a
message, or both. If you receive more
than one voice message, your device
shows the number of voice messages
received.
2. When you connect to voice mail
and the prerecorded greeting
begins, follow the automated
instructions to setup voice mail.
Listen to voice messages
After you set up voice mail, in standby
mode, press and hold 1; or select
Menu > Messages > Voice messages >
Listen to voice messages to dial the
voice mailbox number. When you
connect and the prerecorded greeting
begins, follow the automated
instructions to listen to your voice
messages.
Save voice mailbox number
Your wireless service provider or
network operator may have already
saved your voice mailbox number to
your device. Select OK to leave the
number unchanged.
1. In standby mode, select Menu >
Messages > Voice messages >
Voice mailbox number. The voice
mailbox number is displayed.
Automate voice mail
You can insert special characters called
dialling codes into phone numbers
such as voice mail, and save the
number to a speed dial location.
Dialling codes instruct the receiving
system to pause, wait, bypass, or
accept the numbers that follow them
in the dialling string. See "Phone
numbers with dialling codes," p. 28.
2. If the box is empty, enter the voice
mailbox area code and number,
and select OK.
Voice mail services vary by wireless
service provider or network operator.
The following instructions are
examples of common operations.
Copyright © 2005 Nokia. All rights reserved.
27
M e s s a g e s
Please check with your wireless service 4. Enter any dialling codes as
provider or network operator for
specific instructions on using your
voice mail service.
necessary after the entered
phone number.
For example, if you pause for
5 secondsafterconnectingto voice
mail, enter p twice (two times
2.5 seconds) after the voice
Write down voice mailbox
number and process
1. Write down your voice mailbox
mailbox number: 2145551212pp.
number.
5. Enter any remaining pauses or
other information that enables you
to listen to your messages, and
select OK.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts step-by-step.
Keep in mind that each voice mail
service may vary. However, it may
look similar to the following:
6. Enter a name (such as voice mail),
and select OK.
To dial and listen to your voice mail,
press and hold the assigned speed dial
key in standby mode.
Dial 8585551212, pause 5 seconds,
press 1, pause 2 seconds, press
1234, and press #.
Insert dialling codes
Press * repeatedly to cycle through
dialling codes. When the desired code
appears in the display, pause briefly
and the code is inserted into the
dialling string.
Phone numbers with dialling
codes
Dialling codes instruct the receiving
system to pause, wait, bypass, or
accept the numbers that follow them
in the dialling string. To set up dialling
codes, do the following:
The following dialling codes are
available:
*—Bypasses a set of instructions.
1. In standby mode, select Menu >
p—Pauses for 2.5 seconds before
sending any numbers that follow.
Contacts > Speed dials.
+—Replaced by the international
access code.
2. Scroll to an (empty) Speed dials
slot, and select Assign.
w—Waits for you to press the call key
before sending the numbers or codes
that follow.
3. Enter your number, including the
area code.
Copyright © 2005 Nokia. All rights reserved.
28
M e s s a g e s
> Messages > Voice messages > Clear
voice message icon.
Clear voice mail icon
To clear the voice mail icon from the
display, in standby mode, select Menu
■ Web messaging
Web messaging is a network service.
See "Network Services," p. vii.
If your wireless service provider or
network operatorsupportsthisfeature,
you can use the minibrowser to check
for e-mail messages. In standby mode,
select Menu > Messages >
Minibrowser messages > Connect.
See "Mobile web," p. 70 for more
information on using the minibrowser
in your device to access web pages.
Copyright © 2005 Nokia. All rights reserved.
29
C a l l r e g i s t e r
5. Call register
Call register stores information about
your last 30 missed, received, and
dialled calls respectively and adds the
total duration of all calls. When the
number of calls exceeds the maximum,
the most recent call replaces the
oldest.
■ View missed calls
The missed calls feature does not
function with your device switched off.
Missed calls are calls you have never
answered. To view missed calls, do the
following:
1. In standby mode, select Menu >
Call register > Missed calls, or with
missed call notification displayed,
select List.
Whether viewing missed, received, or
dialled calls, select Options to access
these menu options:
Time of call—Displays the date and
time of the call.
2. Scroll to a name or number, and
select Options and an option to
view or activate.
Send message—Sends a message to the
number.
Use number—Edits the number and
associates a name with the number.
■ View received calls
Received calls are calls that have been
answered.
Save—Enters a name for the number
and saves it to your contacts list.
Add to contact—Adds a number to a
contact and saves it to your contacts
list (available only with the number
not yet stored in your contacts list).
1. In standby mode, select Menu >
Call register > Received calls.
2. Scroll to a name or number, and
select Options and an option to
view or activate.
Delete—Clears the number from
memory.
Call—Calls the number.
Copyright © 2005 Nokia. All rights reserved.
30
C a l l r e g i s t e r
■ View dialled numbers ■ Delete call registers
Dialled calls are previous numbers you You can delete any missed, dialled,
have dialled from your device:
or received calls from your device
memory.
1. In standby mode, press the call key,
or select Menu > Call register >
Dialled numbers.
1. In standby mode, select Menu >
Call register > Delete recent calls.
2. Select the call type you want
to clear: All, Missed, Received,
or Dialled.
2. Scroll to a name or number, and
select Options.
3. Select an option to view or
activate.
■ Call duration
Contact your wireless service provider
or network operator for the actual calls
and services invoice, which may vary
depending on network features,
rounding off for billing, taxes, and so
forth.
View call times
You can make or receive calls to or
from the same number and view up to
five calls displayed with the time each
call occurred. Your device clock must
be set for this feature to work
accurately.
You can view the duration of your last
call, all your dialled calls, all your
received calls, all your calls, and your
life timer, as well as clear your timers.
Select Menu > Call register > Call
duration > Last call duration, Dialled
calls' duration, Received calls'
duration, All calls' duration, Life timer,
or Clear timers. After you select Clear
timers, enter your lock code, and select
OK. See "Change lock code," p. 56.
1. In standby mode, select Menu >
Call register > Missed calls,
Received calls, or Dialled numbers.
2. Highlight your desired name or
number, and select Options > Time
of call.
3. Scroll down to view the call times
from this number; select Back to
return to the options list.
Note: All call duration, except
the life timer, are reset to zero
with Clear timers selected.
Note: Some timers, including
the life timer, may be reset
during service or software
upgrades.
Copyright © 2005 Nokia. All rights reserved.
31
C a l l r e g i s t e r
To activate the call timer in standby
mode while in a call, select
Call Duration > Last Call Duration >
Details > Show call time on display >
On or Off.
All sent data/fax—View the size (KB) of
all sent data and fax calls.
All received data/fax—View the size
(KB) of all received data and fax calls.
Duration of last data/fax call—View the
duration time of the last data or fax
call.
To view the duration of dialled or
received calls placed while in the home
network or while roaming, select
Details > Home or Roaming.
Duration of all data/fax calls—View the
duration time of all calls.
Clear all data/fax registers—Select OK
and then enter Security code when
prompted.
■ Data and fax call
duration
Data and fax calls are a network
service. See "Network Services," p. vii.
If your wireless service provider or
network operator supportsthis feature,
you can view the size or duration of
sent or received data and fax calls.
■ Minibrowser duration
Minibrowser is a network service. See
"Network Services," p. vii. If your
wireless service provider or network
operator supports this feature, you can
view the size or duration of sent or
received data from the minibrowser.
Note:The actual time invoiced
for calls and services by your
service provider may vary,
depending on network
features, rounding off for
billing, taxes, and so forth.
Note:The actual time invoiced
for calls and services by your
service provider may vary,
depending on network
features, rounding off for
billing, taxes, and so forth.
In standby mode, select Menu > Call
register > Data/fax calls and one of the
following options:
In standby mode, select Menu > Call
register > Minibrowser calls and one of
the following options:
Last sent data/fax— View the size (KB)
of the last sent data or fax call.
Last received data/fax—View the size
(KB) of the last received data or fax
call.
Last sent browser data—View the size
(KB) of the last sent browser data.
Last received browser data—View the
size (KB) of the last received data.
Copyright © 2005 Nokia. All rights reserved.
32
C a l l r e g i s t e r
All sent browser data—View the size
(KB) of all sent browser data.
All received browser data—View the
size (KB) of all received browser data.
Last browser session—View the
duration time of the last browser
session.
All browser sessions—View the
duration time of all browser sessions.
Clear all browser registers—Select OK >
Yes to clear all browser logs.
Copyright © 2005 Nokia. All rights reserved.
33
C o n t a c t s
6. Contacts
The contacts list can hold up to 500
contacts with multiple numbers and
text notes for each contact. The
amount of numbers and text entries
you can save may vary, depending on
the length and total number of entries
in the contacts list.
Save an entry
1. In standby mode, select Menu >
Contacts > Names > Options >
Add new.
2. Enter the name, and select OK.
3. Enter the phone number, and select
OK > Back.
■ Add new contacts
To access the contacts list in standby
mode, press the right selection key, or
select Menu > Contacts > Names if the
right selection key on your device has a
network operator menu.
Save numbers and
text items
You can save different types of phone
numbers and short text items per name
to the contacts list. The first number
you save for any entry is automatically
set as the default number, which you
can always change.
Save contact name and
number
1. In standby mode, enter the phone
1. In standby mode, scroll down to
display your contacts list, and
highlight the entry to which you
want to add a phone number or
text item.
number you want to save.
2. Select Save.
3. Enter the name, and select OK.
2. Select Details > Options > Add
detail > Number (General, Mobile,
Home, Office, or Fax), E-mail
address, Web address, Postal
address, Note, Image, or Tone.
Save contact number only
1. In standby mode, enter the phone
number you want to save.
2. Select and hold Options.
3. Enter the number or text for the
type you have selected, and select
OK.
4. To change a number type (General,
Mobile, Home, Office, or Fax),
Copyright © 2005 Nokia. All rights reserved.
34
C o n t a c t s
highlight the number, and select
Group ringing tone—Set the ringing
Options > Change type.
tone for the group.
Group logo—Turn the graphic for
the caller group On or Off, or View
the graphic.
Change default number
You can also change which phone
number is the default (primary)
number for the contact entry.
Group members—Add or remove
members from the caller group.
1. In standby mode, scroll down to
select the contact entry you want
to change, and select Details.
Set up speed dial
You can associate any entry in the
contacts list with a key from 2–9. To
dial those entries, press and hold the
assigned key. See "Speed dial," p. 49 to
activate or deactivate speed dials.
2. Scroll to the number you want to
set as default, and select Options >
Set as default.
Caller groups
Assign a key to speed dial
You can add contacts list entries to any 1. In standby mode, select Menu >
of five caller groups, and assign a
unique ringing tone or graphic to that
group. This enables you to identify
callers from the group by their unique
ringing tone or graphic.
Contacts > Speed dials.
2. Scroll to an (empty) speed dial slot,
and select Assign.
3. Enter the number (including the
area code) and a name for the
number, and select OK; or select
Search to retrieve a number from
the contacts list.
1. To assign an entry in your contacts
list to a caller group, scroll to your
desired contact entry, and select
Details > Options > Caller groups >
Family, VIP, Friends, Business,
Other, or No group.
If speed dial is off, the device
displays a prompt and asks if you
want to turn speed dial on.
2. To manage your caller groups,
in standby mode, select Menu >
Contacts > Caller groups > Family,
VIP, Friends, Business, or Other to
display the following caller group
options:
4. Select Yes to activate speed dial.
Group name—Rename the group to
your preference.
Copyright © 2005 Nokia. All rights reserved.
35
C o n t a c t s
•
Very short names are not accepted.
Use long names and avoid similar
names for different numbers.
Change speed dial numbers
1. In standby mode, select Menu >
Contacts > Speed dials.
Note: Using voice tags may be
difficult in a noisy
environment or during an
emergency, so you should not
rely on voice dialling in all
circumstances.
2. Scroll to the speed dial entry you
want to change, and select Options
> Change.
3. Enter the new number and a name
for the entry, and select OK; or
select Search to retrieve a number
from the contacts list.
Assign a voice tag to an
entry
Before you can use voice dialling, you
must first assign a voice tag to the
number.
Delete speed dial numbers
1. In standby mode, select Menu >
Contacts > Speed dials.
2. Scroll to the speed dial entry you
want to delete, and select Options
> Delete > Yes.
1. In standby mode, scroll to the entry
in your contacts list to which you
want to assign a voice tag.
2. Select Details > Options > Add
■ Voice tags
voice tag > Start.
You can dial up to 25 stored numbers
using voice dialling.
3. Speak clearly into the microphone.
Do not select Quit unless you want
to cancel the recording. The device
automatically stops recording, and
saves and replays the voice tag.
Before using voice tags, note the
following:
•
Voice tags are not language-
dependent. They depend on the
speaker’s voice.
appears next to commands that
have voice tags assigned.
•
•
You must say the name exactly as
you said it when you recorded it.
Dial a number
Voice tags are sensitive to
background noise. Record voice
tags, and use them in a quiet
environment.
1. In standby mode, press and hold
the right selection key with the fold
open, or press and hold the voice
key regardless of the fold being
open or closed.
Copyright © 2005 Nokia. All rights reserved.
36
C o n t a c t s
2. When you hear several beeps and
Add detail—Add more details to the
contact: Name (only available with
no name added), Number (General,
Mobile, Home, Office, or Fax),
E-mail address, Web address,
Postal address, Note, Image
(only available with no image
added), or Tone.
Speak now appears, release the key.
3. Pronounce the voice tag clearly
into the microphone.
When the device finds the voice
tag, Found: appears, and the device
automatically dials the number. If
the device does not locate a
Edit number, Add detail, or Change
image—Edit an existing contact,
phone number, details, or image
attached to the contact.
number or recognise the voice tag,
No match found appears.
Voice tags
Delete—Delete more details (Delete
number, Delete detail, or Delete
image) or the entire contact entry
(Delete contact) of the contact.
1. After you have associated a voice
tag to a contact, select Menu >
Contacts > Voice tags and your
desired voice tag entry.
Send message—Create and send
the contact a text message or
multimedia message.
2. Select Playback, Change, or Delete.
■ Edit contacts list
Use number—Use or save the
number (available when you select
a contact listed with a contact
name). Select Options to use the
number.
entries
1. In standby mode, scroll to the entry
you want to edit in your contacts
list.
2. Select Details > Options.
Set as default—Change the default
number of the contact.
3. Select one of the following options,
which may vary depending on
whether you are editing a contact
listed by phone number or contact
name:
Change type—Change the number
type to General, Mobile, Home,
Office, or Fax.
Add voice tag or Voice tag—Add a
voice tag to the contact with no
voice tag assigned, or select
Playback, Change, or Delete with a
voice tag assigned.
View—View the phone number of
the contact.
Copyright © 2005 Nokia. All rights reserved.
37
C o n t a c t s
Send bus. card—Send the contact
Voice tags—Listen to, modify, or
delete a voice tag to a contact in
the contacts list.
as a business card to another
device.
Caller groups—Add the contact to
Speed dials—View or modify the list
an existing caller group.
of speed dial numbers.
Speed dial—Add the contact to
Delete all contacts—Delete all
your speed dial list.
entries in your contacts list.
4. Edit the option to your preference,
2. Select an option to activate the
feature or access its submenu.
and select OK.
Search for a name
1. In standby mode, scroll down to
display the contents of your
contacts list.
■ Delete contacts
entries
To delete all entries in your contacts
list, in standby mode, select Menu >
Contacts > Delete all contacts.
2. Press the key corresponding to the
first letter of the name for which
you are searching.
■ Access the contacts
menu
3. Scroll to select a contact, and
1. In standby mode, select Menu >
Contacts and one of the following
options:
select Details to view the details.
Configure settings
Names—View the entries in your
contacts list, and select Details or
Options > Search, Add new, or
Delete contact for your selected
entry.
You can select how the contacts
appear in your contacts list and view
the amount of memory used or
available in your device.
In standby mode, select Menu >
Contacts > Settings > Scrolling view to
change view of name list or Memory
status to view the device memory used
and remaining.
Settings—Change the contacts list
view or check the memory status of
your device.
Caller groups—View and edit the
properties of any of the caller
groups, including Family, VIP,
Friends, Business, or Other.
Copyright © 2005 Nokia. All rights reserved.
38
C o n t a c t s
■ Send and receive
contacts
You can send and receive an entry in
your contacts list using text
messaging, if supported by your
wireless service provider or network
operator.
Send a business card
You can send a business card as a text
message to a compatible phone or
other handheld device.
1. Highlight your desired entry from
your contacts list, and select
Details > Options > Send bus. card
> Via multimedia or Via text
message. Default number and All
details options appear only if you
have more than one number or
detail saved to the contact entry.
2. Enter the number for your
recipient, or select Search to
retrieve a number from your
contacts list.
3. Select OK and the business card is
sent.
Copyright © 2005 Nokia. All rights reserved.
39
G a l l e r y
7. Gallery
You can save pictures, video clips,
functions, such as contacts. If the
recordings, and ringing tones to folders device displays a message that the
in the Gallery and add new folders as
well. You can download images and
tones using MMS, SMS, mobile
Internet sites, or Nokia PC Suite.
memory is full, delete some existing
files before proceeding.
■ Folders
1. In standby mode, select Menu >
Gallery > Images, Video clips,
Graphics, Tones, Recordings,
Note:Only compatible devices
offering compatible
multimedia message features
can receive and display
multimedia messages.
Themes, or a user-created folder.
2. Select Open to view a list of the
files in the folder or Options to
access the following:
Your device supports a digital rights
management system to protect
content you have acquired. Content
such as a ringing tone, can be
protected and associated with certain
usage rules, for example, the number
of usage times or a certain usage
period. Usage rules are defined in the
content activation key that can be
delivered with the content or delivered
separately, depending on your wireless
service provider or network operator.
You may be able to update the
Delete folder —Delete a folder you
have created. You cannot delete a
preset folder.
Move—Move the selected folder
into another folder. After selecting
Move, scroll to another folder, and
select Move to. You cannot move a
preset folder.
Rename folder—Rename a folder
you have created. You cannot
rename a preset folder.
activation key. Always check the
delivery terms of any content and
activation key before acquiring them,
as they may be subject to a fee.
Details—Show the name, size, and
date of creation of the selected
folder.
Copyright protection may prevent
some images, ringing tones, and other
content from being copied, modified,
transferred, or diverted.
Type of view—Select List with
details, List, or Grid to determine
how to display the folders and files
within them.
Your device has about 12 MB of
memory for storing files in the Gallery.
This memory is not shared with other
Copyright © 2005 Nokia. All rights reserved.
40
G a l l e r y
Sort—Sort the contents of the
selected folder by name, date,
format, or size.
Add folder—Create a new folder.
Memory status—Check the
available memory for the device
handset.
Activation key list—View the list of
available activation keys. You can
delete activation keys if desired.
Copyright © 2005 Nokia. All rights reserved.
41
M e d i a
8. Media
■ Media player
With the media player you can
download, view, and play compatible
images, audio and video files, and
animated images from a variety of
sources.
antenna. A compatible headset needs
to be attached to the device for the FM
radio to function properly. The quality
of a radio broadcast depends on
coverage of the radio station in that
particular area.
The media player enables you to play
streaming videos and streaming audio
from a network server. Streaming
functionality is a network service and
requires network support. Check the
availability of these services, pricing,
and tariffs with your network operator
or the service provider whose service
you want to use. Service providers will
also give you instructions on how to
use their services.
Warning: Listen to music at a
moderate level. Continuous
exposure to high volume may
damage your hearing. Do not
hold the device near your ear
when the loudspeaker is in
use, because the volume may
be extremely loud.
Turn the radio on and off
1. Connect the phone to a compatible
In standby mode, select Menu > Media
> Media player and one of the
following:
headset or music stand.
2. In standby mode, select Menu >
Media > Radio. The channel
Open Gallery—Open the Gallery. From
Gallery, you can play stored audio and
video files. See "Gallery," p. 40.
location number, the name of the
radio channel (if you have saved
the channel), and the frequency of
the radio channel are displayed.
Go to address—Enter the address of a
mobile Internet service, and select OK.
To use the graphical keys
,
,
■ Radio
, or on the display, scroll left
or right to the desired key, and
select it.
Your phone has an FM radio that also
functions as an alarm clock radio. To
listen to the FM radio on your phone,
connect a compatible music stand or
stereo headset to the connector on the
bottom of the phone. The FM radio
uses the wire of the headset as an
Copyright © 2005 Nokia. All rights reserved.
42
M e d i a
Set frequency—Manually enter the
3. If you have already saved radio
channels, select or to scroll
frequency of a known radio station.
to the channel you would like to
listen to.
To set the radio frequency, press * and
use the keypad to enter the frequency
of a known radio station.
To select a radio channel location,
briefly press the corresponding
number keys.
To adjust the radio volume, press the
volume up and down keys.
When an application using a browser
connection is sending or receiving
data, it may interfere with the radio.
4. To turn off the radio, press and hold
the end key, or select Options >
Switch off.
When you place or receive a call, the
radio automatically mutes. When the
call ends, the radio switches back on.
Options
With the radio on, select Options and
one of the following:
Tune and save a radio channel
You can save a preset station to any
Switch off—Turn off the radio.
Save channel—Save the current station one of 20 locations in memory.
to one of 20 locations (only available
with a new station entered).
1. With the radio on, select
or
to change the radio frequency in
0.1 MHz steps, or select and hold
Channels—Scroll up or down to select
a channel from 20 locations. With an
existing channel highlighted, select
Options > Delete channel or Rename to
delete or rename the saved channel.
or
to start the channel
search. Searching stops when a
channel is found.
2. To save the channel, select Options
Mono output or Stereo output—Listen
to the radio in monaural mode
(default) or in stereo. Stereo output is
available through a stereo
> Save channel.
3. Enter a name for the channel, and
select OK.
enhancement.
Loudspeaker or Headset—Listen to the
radio through the speakerphone or
through the headset.
■ Voice recorder
This feature enables you to record
pieces of speech or sound with your
device and listen to them later. The
total available time is 3 minutes with
no memos stored. The maximum
length of a recording depends on how
much memory remains available.
Copyright © 2005 Nokia. All rights reserved.
43
M e d i a
In standby mode, select Menu > Media Sort—Sort the contents of the
> Recorder > Record to start the
recording by name, date, format, or
recording or Recordings list to manage size.
the folder you have defined for
recording storage.
■ Media equaliser
The equaliser enhances the sound
quality when using the music player by
amplifying or attenuating frequency
bands. You can access five preset
equaliser settings (Normal, Pop, Rock,
Jazz, and Classical) and two
Record speech or sound
1. In standby mode, select Menu >
Media > Recorder > Record.
2. After you hear the recorder start
tone, begin recording speech or
sound.
customisable settings.
3. When you finish recording, select
Stop and your recording is saved to
the Recordings folder in the
Gallery.
Activate an equaliser set
In standby mode, select Menu > Media
> Equaliser, scroll to the desired
setting, and select Activate.
Create a custom equaliser set
1. In standby mode, select Menu >
Media > Equaliser.
Options
After you have saved the recording to
the Recordings folder, highlight the
recording, and select Open to listen to
the recording using the earpiece; or
select Options and one of the
following.
2. Scroll to Set 1 or Set 2, and select
Options > Edit.
Delete—Erase the recording.
Rename—Change the name of the
recording.
Set as ring tone—Use your recording as
a ringtone (a carrier-dependent
feature).
Details—Show the name, size, and date
of creation of the recording.
The selected set appears in the
display with the bar on the far left
highlighted. The bars adjust
frequencies, from the lowest
Type of view—Select List with details,
List, or Grid to determine how to
display the recording
Copyright © 2005 Nokia. All rights reserved.
44
M e d i a
(the leftmost bar) to the highest
(the rightmost bar). The higher the
indicator on a particular bar, the
more that frequency is amplified.
3. To adjust the lowest frequency,
scroll up and down on the bar.
4. To adjust other frequencies, scroll
left or right to the other bars.
5. Repeat steps 3 and 4 to adjust the
setting for each frequency; then
select Save.
6. To rename the setting, select
Options > Rename, enter a new
name, and select OK.
7. To activate the setting,
select Activate.
Copyright © 2005 Nokia. All rights reserved.
45
S e t t i n g s
9. Settings
Use this menu to change profiles,
themes, main display settings, mini
display settings, tone settings, time
and date settings, call settings, phone
settings, voice commands,
enhancement settings, security
settings, application settings, network
settings, network services, and restore
factory settings.
Personalise a profile
You can personalise any of the profiles
in various ways.
2. Select the profile you want to
personalise.
3. Select Personalise and the option
you want to personalise.
■ Profiles
Profiles define how your device reacts
when you receive a call or message and
how your keypad sounds when you
press a key. You can leave ringing
options, keypad tones, and other
settings for each of the available
profiles at their default setting, or
personalise them to suit your needs.
Set a timed profile
You can use timed profiles to prevent
missed calls. For example, suppose you
attend an event requiring your device
set to Silent before the event starts,
but you forget to return it to General
until long after the event. A timed
profile can prevent missed calls by
returning your device to the default
profile at a time you specify. You can
set timed profiles up to 24 hours in
advance.
Profiles are also available for
enhancements such as the headset and
car kit. See "Enhancement settings,"
p. 54.
To activate a profile, in standby mode,
select Menu > Settings > Profiles >
General, Silent, Meeting, Outdoor, or
Pager > Activate.
1. In standby mode, select Menu >
Settings > Profiles.
2. Select the profile you want to
activate and Timed for timed
expiration.
3. Enter the time in hh:mm format for
the profile to expire, and select OK.
Copyright © 2005 Nokia. All rights reserved.
46
S e t t i n g s
■ Tone settings
■ Themes
You can adjust the ringing volume,
keypad tones, and more for the active
profile. See "Personalise a profile,"
p. 46 for more information on profile
settings.
A theme contains many elements for
personalizing your phone, such as
wallpaper, screen saver, colour
scheme, and a ringing tone.
To choose the theme of your display,
in standby mode, select Menu >
Settings > Themes > Select theme and
then select the desired theme.
Select Menu > Settings > Tones and
one of the following:
Incoming call alert—Select how the
device notifies you of an incoming call.
■ Main display settings
Video ringing tone—Select On or Off to
indicate whether to replace the default
audio ringing tone with the selected
video.
Wallpaper
background picture (wallpaper).
Ringing tone—Select the ringing tone
for incoming calls.
1. In standby mode, select Menu >
Settings > Main display >
Ringing volume—Set the volume of
your ringing tone.
Wallpaper > Select wallpaper >
Images, Video clips, Graphics, or a
user-created folder > Open.
Light indicator—Turn the light
indicator on or off with On or Off.
Vibrating alert—Turn the vibrating
alert On or Off.
2. Browse your selected folder
containing the graphics or image
of your desired wallpaper.
Message alert tone—Select the tone for
received messages.
3. When you arrive at the image of
your choice, select Options > Set as
wallpaper.
Keypad tones—Set the volume of your
keypad tones (or turn them off).
Warning tones—Turn warning and
confirmation tones On or Off.
4. To activate or deactivate
wallpaper, in standby mode, select
Menu > Settings > Main display >
Wallpaper > On or Off.
Alert for—Define which caller groups
the selected profile will accept or
decline. See "Caller groups," p. 35.
Copyright © 2005 Nokia. All rights reserved.
47
S e t t i n g s
Screen saver
Backlight time-out
In standby mode, select Menu >
You can choose how long to set the
Settings > Main display > Screen saver backlights on. In standby mode, select
> On, Off, Screen savers (Image, Slide
Menu > Settings > Main display
set, or Video clip), or Time-out.
>Backlight time-out > 15 seconds or
Personalise (to enter the time-out
ranging from 15 seconds to 5 minutes).
Power saver
You can turn the power saver on and
off. In standby mode, select Menu >
Settings > Main display > Power saver
> On or Off.
■ Mini display settings
Power saver
You can turn the power saver on and
off. In standby mode, select Menu >
Settings > Mini display > Power saver >
On or Off.
Colour schemes
You can change the colour of some
display components in your device,
such as indicators and signal bars.
■ Time and date
In standby mode, select Menu >
Settings > Main display > Colour
schemes and the colour scheme of
your choice.
settings
Clock
In standby mode, select Menu >
Settings > Time and date > Clock >
Choose a banner
Banner is a carrier-dependent feature. Show clock or Hide clock, Set the time,
Time zone or Time format.
If your wireless service provider or
network operator supportsthis feature,
you can choose whether the display
shows the operator logo when the
phone is in the idle state.
Date
In standby mode, select Menu >
Settings > Time and date > Date >
In standby mode, select Menu >
Settings > Main display > Banner >
Default or Personalise.
Show date or Hide date, Set the date,
Date format, or Date separator.
Copyright © 2005 Nokia. All rights reserved.
48
S e t t i n g s
Date and time auto-update
■ Call settings
Auto-update is a network service. See
"Network Services," p. vii. If your
wireless service provider or network
operator supports this feature, you can
allow the digital network to set the
clock, which is useful when you are out
of your home area, for instance when
you have traveled to another network
or time zone.
Anykey answer
Anykey answer enables you to answer
an incoming call. Briefly press any key
except the right selection key or
end key.
In standby mode, select Menu >
Settings > Call > Anykey answer > On
or Off.
In standby mode, select Menu >
Settings > Time and date > Auto-
update of date & time > On, Confirm
first, or Off.
Automatic redial
Occasionally, your network may
experience heavy traffic, resulting in a
fast busy signal when you dial.
With automatic redial activated, your
device redials the number (number of
times is specified by the network),
and notifies you when the network is
available.
If you use the Auto-update of date &
time option while outside your digital
network, you may be prompted to
enter the time manually. Network time
will replace the time and date when
you reenter your digital network.
If your battery has been removed or
has discharged outside the digital
network, you may be prompted to
enter the time manually (when the
battery is replaced or recharged, and
you are still outside of the digital
network).
In standby mode, select Menu >
Settings > Call > Automatic redial >
On or Off.
Speed dial
You can activate or deactivate speed
dial. In standby mode, select Menu >
Settings > Call > Speed dialling > On or
Off. See "Set up speed dial," p. 35.
Copyright © 2005 Nokia. All rights reserved.
49
S e t t i n g s
Prefix+ phone no.+ card no.—Dial
the prefix (numbers that must
precede the phone number) and
phone number you want to dial,
then the card number (and the PIN,
if required).
Open fold to answer
By default, your phone answers an
incoming call when you open the fold.
You can change the default setting to
have your phone not answer calls with
the fold open.
In standby mode, select Menu >
Settings > Call > Answer when fold is
opened > On or Off.
4. Enter the required information
(access number or prefix and card
number), and select OK to confirm
your entries.
Calling card
5. Select Card name, enter the card
If you use a calling card for long
distance calls, you can save the calling
card numbers in your device. Your
device can store up to four calling
cards. Contact your calling card
company for more information.
name, and select OK.
Make calls
After you have saved your calling card
information in your device, you can
make a call using your calling card.
1. In standby mode, select Menu >
Save information
1. In standby mode, select Menu >
Settings > Call > Calling card.
Settings > Call > Calling card.
2. Enter your lock code, and select OK.
See "Change lock code," p. 56.
2. Enter your security code, and select
OK. See "Change lock code," p. 56.
3. Select your desired calling card.
3. Scroll to one of the four card
memory locations, and select
Options > Edit > Dialling sequence
and one of the following sequence
types:
4. Press the end key to return to
standby mode; then enter the
phone number, including any prefix
(such as 0 or 1) that your calling
card may require when you make a
calling card call. See your calling
card for instructions
Access no.+ phone no.+ card no.—
Dial the access number, the phone
number, then the card number (and 5. Press and hold the call key for a few
the PIN, if required).
seconds until Card call appears.
Access no.+ card no.+ phone no.—
Dial the access number, the card
number (and the PIN, if required),
then the phone number.
6. When you hear the tone or system
message, select OK.
Copyright © 2005 Nokia. All rights reserved.
50
Normal—The device receives
International prefix
incoming calls as usual.
You can store an international dialling
prefix into your device. In standby
mode, select Menu > Settings > Call >
International prefix.
Data calls only—The device receives
only data calls.
Fax calls only—The device receives
only fax calls.
In standby mode, when you enter +
(press * twice) at the beginning of a
phone number, your device
automatically inserts the international
dialling prefix that you have stored
after you press the call key. See "Insert
dialling codes," p. 28.
2. When finished with receiving the
Data or Fax call, the phone will
return to Normal mode.
Data transfer
You can view the transmission speed
when sending or receiving data and
fax calls.
Data or fax calls
Data and fax calling is a network
service. See "Network Services," p. vii.
If your wireless service provider or
network operatorsupportsthisfeature,
you can set up the device to send or
receive data and fax calls with a
terminal, such as a PDA or PC,
connected.
In standby mode, select Menu >
Settings > Call > Data/fax calls > Data
rate display > Graphic or Off.
Call summary
Your device can display the time spent
on a call when you hang up. In standby
mode, select Menu > Settings > Call >
Call summary > On or Off.
For better performance during data
calls, place the device on a stationary
surface. Do not move the device by
holding it in your hand during a data
call.
Ringing tone for no caller ID
You can select a different ringing tone
For more information on connectivity,
refer to the PC/PDA Connectivity Guide
from the Nokia website at
for calls received with no caller ID.
In standby mode, select Menu >
Settings > Call > Ringing tone for no
caller ID > On or Off.
1. In standby mode, select Menu >
Settings > Call > Data/fax calls >
Incoming data/fax call and one of
the following options:
Copyright © 2005 Nokia. All rights reserved.
51
S e t t i n g s
DTMF tones
■ Phone settings
DTMF tones are the tones that sound
when you press the keys on your device
keypad. You can use DTMF tones for
many automated dial-up services such
as banking and airlines or for entering
your voice mailbox number and
password.
Phone language
The phone language affects time
and date formats of the clock, clock,
and calendar.
Memory status
DTMF tones are sent during an active
call. You can send them manually from
your device keypad, or send them
automatically by saving them in your
device.
You can view the size of memory
available on your device. In standby
mode, select Menu > Settings > Phone
> Memory status.
You can view the size of memory
available for application installations.
In standby mode, select Menu > Extras
> Memory.
Set type
In standby mode, select Menu >
Settings > Phone > DTMF tones >
Manual DTMF tones and one of the
following options:
Automatic keyguard
You can set the keypad of your device
to lock automatically after a preset
time delay.
Continuous—Used to set the tone
sound for as long as you press and hold
a key.
Fixed—Used to send tones of the
duration you specify in the DTMF tone
length option.
1. In standby mode, select Menu >
Settings > Phone > Automatic
keyguard > On or Off.
Off—Used to turn off tones. No tones
2. If you select On, Set delay: is
are sent when you press a key.
displayed.
Set length
3. Enter the delay time (in mm:ss
You can specify DTMF tone length for
the Fixed option. In standby mode,
select Menu > Settings > Phone >
DTMF tones > DTMF tone length >
Short (0.1 seconds) or Long (0.5
seconds).
format), and select OK.
When keyguard is on, it may be
possible to dial the emergency number
programmed into your device.
Copyright © 2005 Nokia. All rights reserved.
52
S e t t i n g s
Note: Using voice tags may be
difficult in a noisy
environment or during an
emergency, so you should not
rely on voice dialling in all
circumstances.
Start-up tone
You can select to have a start-up tone
when you first turn on your device.
In standby mode, select Menu >
Settings > Phone > Start-up tone >
On or Off.
Hands-free operation
Help text activation
You can set as many as 16 voice
commands to enable hands-free
operation of certain features in your
device.
Your device displays brief descriptions
for most menu items. When you arrive
at a feature or menu, pause for about
14 seconds and wait for the help text
to display. If necessary, use the scroll
key to page through the full help text.
Assign a voice tag to a
command
Before using voice commands, you
must first add a voice tag to the device
function.
The default setting for help text is On.
However, you can turn help text on or
off. In standby mode, select Menu >
Settings > Phone > Help text
1. In standby mode, select Menu >
activation > On or Off.
Settings > Voice commands.
2. Select the device function you
want to tag: Profiles, Voice
mailbox, Radio, Voice recorder, or
Call register.
■ Voice commands
Before using voice tags, note the
following:
•
Voice tags are not language-
dependent, but depend on the
speaker’s voice.
3. If necessary, select an option
associated with that function.
4. Select Start, and speak the voice
tag clearly into the microphone.
Do not select Quit unless you want
to cancel the recording.
•
•
You must say the name exactly as
you said it when you recorded it.
Voice tags are sensitive to
background noise. Record voice
tags, and use them in a quiet
environment.
The device replays and saves the
recorded tag. appears next to
commands with voice tags assigned.
•
Very short names are not accepted.
Use long names, and avoid similar
names for different numbers.
Copyright © 2005 Nokia. All rights reserved.
53
S e t t i n g s
Activate a voice command
After you have associated a voice tag
with a function in your device, to issue
a command, speak the voice tag.
Headset
Important: The headset may
affect your ability to hear
sounds around you. Do not use the
headset in situations that may
endanger your safety.
1. In standby mode, press and hold
the right selection key or voice key.
Select the option of your choice to
enter the submenu and modify its
settings.
2. With Speak now displayed,
pronounce the voice tag clearly
into the microphone.
Default profile—Choose the profile you
want automatically activated with a
headset connected.
With the voice tag found, the device
displays Found:, and plays the
recognised voice tag through the
earpiece. The function you requested is
activated.
Automatic answer—Answer calls
automatically after one ring with a
headset connected. Select On or Off.
Options
Note: Automatic answer will
only be active whilst General
profile is active.
After you have associated a voice tag
to a command, you can select one of
the following options:
Playback—Listen to the voice
command tag.
Hands-free operation
Select the option of your choice to
enter the submenu and modify its
settings.
Change—Change the voice command.
Delete—Erase the voice command tag.
Default profile—Choose the profile you
want automatically activated with
your device connected to a car kit.
■ Enhancement
settings
Automatic answer—Answer calls
automatically after one ring with a car
kit connected. Select On or Off.
The enhancement settings menu is
shown only if the device has been
connected to a compatible
enhancement. In standby mode, select
Menu > Settings > Enhance-ments >
Headset, Handsfree, Loopset, Text
phone, Music stand, or Charger.
Note: Automatic answer will
only be active whilst General
profile is active.
Lights—Choose to keep the device
lights always on, or to shut off
automatically after several seconds.
Select On or Automatic.
Copyright © 2005 Nokia. All rights reserved.
54
S e t t i n g s
Loopset
■ Security settings
The LPS-4 loopset is recommended for
use with your device. Select the option
of your choice to enter the submenu
and modify its settings.
When first accessing the security
settings, enter the preset lock code.
The default setting for lock code is
12345. Depending on your wireless
service provider or network operator,
the preset lock code can be a four digit
number such as 1234 or 0000. If none
of these work, contact your wireless
service provider or network operator
for help.
Default profile—Choose the profile you
want to be automatically activated
when your device is connected to a
loopset.
Automatic answer—Answer calls
automatically after one ring when a
loopset is connected. Select On or Off.
Phone lock
Note: Automatic answer will
only be active whilst General
profile is active.
The phone lock feature protects your
device from unauthorised outgoing
calls or unauthorised access to
information stored in the device.
With phone lock activated, Phone
locked appears each time you turn your
device on or off.
Charger
Select the option of your choice to
enter the submenu and modify its
settings.
With the device locked, calls may still
be possible to the official emergency
number programmed into your device.
Default profile—Choose the profile you
want automatically activated with
your device connected to the charger.
1. In standby mode, select Menu >
Lights—Choose to keep the device
lights always on, or to shut off
automatically after several seconds.
Select On or Automatic.
Settings > Security.
2. Enter the lock code, and select OK.
See "Change lock code," p. 56.
3. Select Phone lock and one of the
following options:
Off—Immediately turns off the
device lock feature.
Lock now—Immediately turns on
the device lock feature.
Copyright © 2005 Nokia. All rights reserved.
55
S e t t i n g s
On power-up—Turns on the device
Change lock code
lock feature the next time you turn
the device on.
The preset lock code, by default, is the
last four digits of your phone number.
Depending on your wireless service
provider or network operator,
the preset lock code can be a four digit
number such as 1234 or 0000. If none
of these work, contact your wireless
service provider or network operator
for help.
With Lock now selected, you must
enter your lock code before the device
can function normally. With the lock
code accepted, your device functions
normally.
Call not allowed appears if you attempt
to place a call with your device locked.
To answer a call with phone lock on,
select Answer, or press the call key.
To ensure the security of your device,
you may want to change the preset
lock code to your own selected four
digit number. Avoid using codes similar
to emergency numbers such as 111 or
000 or 911 to prevent accidental
dialling of the emergency number.
Allow numbers
With phone lock on, the only outgoing
calls you can make are to the
emergency number programmed into
your device (for example, 111 or 000 or
911) or the number stored in the
Allowed number when lock active
location:
If you enter an incorrect lock code five
times in a row, your device may ask you
for the security code. By default, the
security code is 12345, a five digit
number.
1. In standby mode, select Menu >
Note: With the wrong lock
code entered five times in
succession, your phone will
not accept your correct lock
code for 5 minutes, even if you
power off the device between
incorrect entries.
Settings > Security.
2. Enter the lock code, and select OK.
See "Change lock code," p. 56.
3. Select Allowed number when lock
active. With an empty folder
selected, select Assign, and enter
the phone number; or select Assign
> Search to recall the number from
your contacts list. Select OK.
1. In standby mode, select Menu >
Settings > Security.
2. Enter the lock code, and select OK.
3. Select Change lock code.
To call the allowed phone number,
in standby mode, scroll down to
highlight the number you want to call,
or enter it on the keypad, and then
press the call key to place the call.
4. Enter the new lock code (must be 4
characters in length).
Copyright © 2005 Nokia. All rights reserved.
56
S e t t i n g s
5. Reenter the new lock code for
5. Select whether to block or allow
numbers:
verification, and select OK.
When changing your lock code, make
sure you store it in a safe place, away
from your device. Avoid entering
access codes similar to emergency
numbers to prevent accidental
emergency calls.
Blocked numbers—Set the numbers
the phone can only block, allowing
all the rest.
Allowed numbers—Set the numbers
the phone can only call or receive,
blocking all the rest.
6. Select one of these options: Select,
Add restriction (unavailable with
memory full), Edit (unavailable
with no number added), or Delete
(unavailable with no number
added).
Call restrictions
Select call restrictions to block or allow
numbers for incoming and outgoing
calls. With any numbers entered as
allowed numbers, all those entered as
blocked numbers are ignored. With a
number blocked, the phone blocks any
call from it, and send the caller to the
voice mail.
Note: With restricted calls,
you may still call the official
emergency number
1. In standby mode, select Menu >
programmed into your device.
Settings > Security.
2. Enter the lock code, and select OK. Voice privacy
See "Change lock code," p. 56.
Voice privacy is a network service.
See "Network Services," p. vii. If your
wireless service provider or network
operator supports this feature, the
voice privacy feature protects the
privacy of your current phone
3. Select Call restrictions.
4. Select the types of calls you want
to restrict:
Restrict outgoing calls—Set
conversation from other callers placing
phone calls on your same network.
restrictions on making calls.
Restrict incoming calls—Set
restrictions on receiving calls.
1. In standby mode, select Menu >
Settings > Security.
2. Enter the lock code, and select OK.
See "Change lock code," p. 56.
3. Select Voice privacy > On or Off.
Copyright © 2005 Nokia. All rights reserved.
57
S e t t i n g s
Roaming options
You can set your device to roam or
search for another network when you
are not in your home area.
■ Application settings
1. In standby mode, select Menu >
Settings > Application settings.
2. Scroll to one of the following
submenus to activate options for
preset or downloaded games or
applications.
1. In standby mode, select Menu >
Settings > Network > Roaming
options and one of the following
options:
Application sounds—Select On or
Off.
Home only—You can make and
receive calls in your home area
only.
Application lights—Select App.
defined or Default.
Automatic—The device
Application vibration—Select On or
Off.
automatically searches for service
in another digital network. With no
service found, the device uses
analogue service. The roaming rate
applies when not in the home
service area.
■ Network
The menu options you see in your
device depend on your service
provider’s network. The network
determines which options actually
appear in the device menu. Check with
your service provider for more
information.
2. Select OK, if necessary, to confirm
the activation.
Mode
You can choose whether your device
uses digital or analogue service.
The Network menu enables you to
personalise the way your device
chooses a network in which to operate
while you are within or outside of your
primary or home system. Your device is
set to search for the most cost-
effective network. If your device
cannot find a preferred network, it
selects a network automatically based
on the option you choose in the
Network menu.
In standby mode, select Menu >
Settings > Network > Mode and one of
the following service options:
Digital preferred—The device works in
digital mode but will also work in
analogue mode with digital mode
unavailable.
Digital only—The device only works in
digital mode.
Analogue only—The device only works
in analogue mode.
Copyright © 2005 Nokia. All rights reserved.
58
S e t t i n g s
Activate
■ Network services
The following options may not all
appear in the display. They will only
appear in the display if the relevant
feature code has been entered into
the phone.
The following features are network
services. See "Network Services," p. vii.
Store a feature code
1. In standby mode, select Menu >
Settings > Network services >
Network feature setting.
1. In standby mode, select Menu >
Settings > Network services > Call
divert and one of the following
options:
2. Enter the feature code from your
service provider (for example,
*633), and select OK.
Divert all calls—Divert all calls to
the number you specify.
3. Select the type of service that
matches the feature code you
entered (for example, Call divert).
Divert if busy—Divert incoming
calls when you are in a call.
Divert if not answered—Divert
incoming calls to another number
if you are unable to answer. You
can set a delay before diverting
takes place.
The activated feature code is now
stored in your device, and you are
returned to the Feature code: field.
Continue entering other feature
codes (for example, *633), or press
the end key to return to standby
mode. When you enter a network
feature code successfully, the
feature becomes visible in the
Network services menu.
Divert if out of reach—Divert
incoming calls when your device is
off.
2. Select Activate.
3. Enter the number to which your
calls, data, or other information
will be diverted, and select OK.
Call diverting
Call diverting tells your network to
redirect incoming calls to another
number. Call diverting is a network
service and may not work the same in
all networks, so contact your wireless
service provider or network operator
for availability.
Cancel
In standby mode, select Menu >
Settings > Network services > Call
divert > Cancel all diverts. Cancel all
diverts may affect your ability to
receive voice mail messages. Contact
your wireless service provider or
network operator for specific details.
Copyright © 2005 Nokia. All rights reserved.
59
S e t t i n g s
■ Restore factory
settings
You can reset some of the menu
settings to their original values. Data
that you have entered or downloaded
is not deleted (for example, entries in
your contacts list are not affected).
1. In standby mode, select Menu >
Settings > Restore factory sett..
2. Enter the lock code, and select OK.
See "Change lock code," p. 56.
Note: Depending on your
wireless service provider or
network operator, your device
may sometimes ask you for the
security code (defaulted to
12345) instead of the lock
code.
Copyright © 2005 Nokia. All rights reserved.
60
O r g a n i s e r
10. Organiser
Your device contains features to help
organise your everyday life, including
an alarm clock, calendar, notes, todo
list, calculator, countdown timer, and
stopwatch.
Repeat alarm
You can set the alarm to repeat.
In standby mode, select Menu >
Organiser > Alarm clock > Repeat
alarm.
■ Alarm clock
Set the alarm tone
If the alarm time arrives with the
device switched off, the device
You can set which tone to play when
the alarm sounds. In standby mode,
select Menu > Organiser > Alarm clock
> Alarm tone > Standard, Radio, or
Open Gallery to choose the tone you
want to use.
switches itself on and starts sounding
the alarm tone. If you select Stop, the
device asks whether you want to
activate the device for calls. Select No
to switch off the device or Yes to make
and receive calls. Do not select Yes
when wireless phone use may cause
interference or danger.
If you set your alarm to Radio, use an
accessory that supports FM stereo.
Snooze time-out
Set or change alarm setting To set the alarm snooze time, select
Menu > Organiser > Alarm clock >
Snooze time-out > 5 minutes, 10
minutes, 15 minutes, 30 minutes, 60
minutes, or Other (to enter up to 60
The alarm clock depends on the device
clock, which sounds an alert anytime
you specify and even works with the
device turned off.
minutes snooze time).
1. In standby mode, select Menu >
Organiser > Alarm clock > Alarm
time > On.
Alarm conditions
When the alarm sounds, your device
beeps, vibrates (if vibrating alert is on
for currently active profile), and the
2. Enter the time for the alarm in
hh:mm format.
3. Alarm on appears briefly in the
display lights up.
display, and
standby mode.
appears in
With the device on, select Stop to shut
the alarm off or Snooze. With Snooze
selected, the alarm stops for 10
Copyright © 2005 Nokia. All rights reserved.
61
O r g a n i s e r
minutes, and Snooze on appears in the 2. Enter the date (dd/mm/yyyy),
display.
and select OK.
If you do not press a key, the alarms
stops (snoozes) for 10 minutes, then
sounds again. You can also select
Menu > Organiser > Alarm clock >
Snooze time-out to reset the snooze
time.
Note a specific date
You can apply five types of notes to
your calendar. Your device asks for
further information depending on
which note you choose. You also have
the option to set an alarm for any note
you select.
Turn an alarm off
In standby mode, select Menu >
Organiser > Alarm clock > Alarm time
> Off.
1. Go to the date for which you want
to set a reminder. See "Go to a
date," p. 62.
2. From the monthly view (with the
go-to date highlighted), select
Options > Make a note and one of
the following note types:
■ Calendar
The calendar keeps track of reminders,
calls you need to make, meetings, and
birthdays, which can even sound an
alarm for any of these events.
Meeting—Enter a subject, location,
and a start and end date and time.
Monthly view provides an overview of
the selected month and weeks,
enabling you to jump to a specific date.
Any days or dates that appear in bold
font contain calendar notes such as a
meeting or reminder.
Call—Enter a phone number, a
name, and the date and time.
Birthday—Enter the person’s name,
date and year of birth.
Memo—Enter a subject and a start
and end date.
Open
Reminder—Enter the subject and
date of your reminder.
In standby mode, select Menu >
Organiser > Calendar, or press the
right scroll key. Scroll to move the
cursor in some calendar views.
You are given the option to set an
alarm.
3. Enter your note, and select Save.
Go to a date
1. In standby mode, select Menu >
Organiser > Calendar > Options >
Go to date.
View notes (day view)
After you have created calendar notes,
you can view them.
Copyright © 2005 Nokia. All rights reserved.
62
O r g a n i s e r
Send note—Send the note to
1. In standby mode, select Menu >
Organiser > Calendar.
another device as a text message or
in calendarto-calendar format by
way of multimedia messages or
SMS.
2. Scroll to the date containing the
note that appears in bold type, and
select View.
Copy—Copy the note for you to
paste to another date.
Options while viewing a list
of notes
Settings—Set the date and time,
date and time format, the day each
week starts and whether you want
your notes to autodelete after a
specified time.
1. Select Options while viewing a
day’s note to display the following:
The options listed below are
available while viewing the header
of a note.
Go to to-do list—Jump to the to-do
list on your calendar.
Make a note—Create a new note
for the selected date.
2. Select an option to activate it or
enter its submenu.
Delete—Delete the note.
Edit—Edit the note.
Send a note
1. In standby mode, select Menu >
Move—Move the note to another
date on your calendar.
Organiser > Calendar.
Repeat—Set the note (except for
birthday note) to recur on a regular
basis (daily, weekly, biweekly,
monthly, and yearly).
2. Scroll to the date that appears in
bold type, containing the note you
want to send, and select View.
3. Scroll to the note you want to send,
and select Options > Send note >
Send as message (Text message or
Multimedia msg.) or Via calendar.
Go to date—Jump to another date
on your calendar.
Go to today—Jump to the current
date on your calendar.
4. If you selected Via calendar, enter
the number for the recipient, or
select Search to retrieve a number
from the contacts list, and select
OK.
5. If you selected Send as message
(Text message or Multimedia msg.),
Copyright © 2005 Nokia. All rights reserved.
63
O r g a n i s e r
the note appears as a text message
in the display.
■ Notes
You can write and save information in
Notes and send notes using
•
Select Send to > Send to
number, Send to e-mail, Send
multimedia or text message.
In standby mode, select Menu >
Organiser > Notes. With no notes
created, select Add note, create your
note, and select Save when done. With
notes already created, highlight the
note you want to use, and select View
to read or Options > Make a note,
Delete, Edit, Send note (Send as
message), or Delete all notes.
to many, or Send to distrib. list.
•
Enter the number for the
recipient, or select Search to
retrieve a number from the
contacts list, and select Send.
Receive notes
When you receive a calendar note in
calendar-to-calendar format, your
device displays Calendar note received.
■ To-do list
•
To view calendar notes, select
Show, and if necessary, scroll to
view the entire message.
Use the to-do list feature to keep track
of your tasks. You can save a note for a
task, select a priority level for the note
and mark it as done when you have
completed it. You can sort the notes by
priority or by date.
•
•
To save calendar notes after
viewing, select Options > Save.
To discard calendar notes after
viewing, select Exit or Options >
Discard.
Add a to-do note
1. In standby mode, select Menu >
When you receive a calendar note
or text message, a message
notification appears in standby
mode. You can save the note in
your calendar and set an alarm for
any date and time.
Organiser > To-do list.
2. If there are no notes, select Add
note.
3. Enter the subject of the to-do note,
and select Save.
4. Select High, Medium, or Low
priority.
5. Enter the due date and time to set
the alarm.
Copyright © 2005 Nokia. All rights reserved.
64
O r g a n i s e r
Mark note as done or Mark as not
done—Mark a note or task as
completed or not; if completed, no
more reminders will follow.
View a to-do note
1. In standby mode, select Menu >
Organiser > To-do list.
2. Highlight a to-do note, and select
Delete—Delete the note.
Options and one of the following:
Edit priority—Change the priority to
Add—Add another note.
high, medium, or low.
Delete—Delete the note.
Send—Send the note to another
device, as a text or multimedia
message, or as a calendar note to
another compatible device.
Mark note as done or Mark as not
done—Mark a note or task as
completed or not; if completed, no
more reminders will follow.
Go to calendar—Leave the to-do
list, and go to the calendar.
Sort by deadline—Sort the notes
according to their deadline.
Save to calendar—Save the to-do
note to a date on your calendar.
Send—Send the note to another
device, as a text or multimedia
message, or as a calendar note to
another compatible device.
■ Calculator
The calculator in your device adds,
subtracts, multiplies, divides,
Go to calendar—Leave the to-do
list, and go to the calendar.
calculates the square and the square
root, changes the sign of the number
entered, and converts currency values.
Save to calendar—Save the to-do
note to a date on your calendar.
Delete done notes—Delete all the
completed to-do notes.
Note:This calculator, designed
for simple calculations, has
limited accuracy.
Delete all notes—Delete all the
1. In standby mode, select Menu >
to-do notes in the list.
Organiser > Calculator.
3. View the to-do note, and select
Edit to edit the note or Options to
select from the following:
2. Enter the first number in the
calculation. Press # for a decimal
point if necessary.
Deadline—Set a deadline for the
note, listing any uncompleted
notes if existing.
To change the sign, select Options
> Change sign, or scroll up or down.
Copyright © 2005 Nokia. All rights reserved.
65
O r g a n i s e r
To perform a square or square root
2. Enter the exchange rate (press # to
calculation, select Options >
insert a decimal), and select OK.
Square or Square root.
3. In standby mode, enter the
To cycle through the add (+),
subtract (-), multiply (*), and divide
(/) characters, press *.
currency amount to be converted.
4. Select Options > In domestic or In
foreign.
3. Enter the second number in your
calculation.
In domestic—converts foreign
currency to domestic currency.
4. Select Equals to complete
calculation or Options if more
functions are required.
In foreign—converts domestic
currency to foreign currency.
5. If you do not enter an exchange
rate, the device will prompt you to
do so. Select OK. You can edit the
exchange rate at anytime.
Currency converter
You can convert foreign currency to
domestic, or vice versa, directly in
standby mode or from the Calculator
menu.
■ Countdown timer
The countdown timer in your device
enables you to enter a specific time (up
to 99 hours and 59 minutes). When the
time runs out, your device sounds an
alarm.
Note: When you change base
currency, you must enter the
new rates because all
previously set exchange rates
are set to zero.
Note: The countdown timer
only works when the device is
on. When you turn off your
device, the timer is no longer
active.
1. In standby mode, select Menu >
Organiser > Calculator > Options >
Exchange rate > Foreign unit in
domestic units or Domestic unit in
foreign units.
Foreign unit in domestic units—The
number of home units cost to make
one unit of foreign currency.
Set the timer
1. In standby mode, select Menu >
Organiser > Timer > Normal timer,
Interval timer, or Settings.
Domestic unit in foreign units—The
number of foreign units cost to
make one unit of your home
currency.
Use Normal timer to measure the
countdown time for tasks that
have one period (timer name).
Copyright © 2005 Nokia. All rights reserved.
66
O r g a n i s e r
Select Interval timer to save sets of
countdown times with more than
one period.
■ Stopwatch
You can use the stopwatch in your
device to track time. The stopwatch
displays time in hours, minutes,
seconds, and fractions of a second in
hh:mm:ss.ss format.
2. Enter the time (in hh:mm:ss
format), and select OK.
3. Enter a note for the timer, and
Using the stopwatch or allowing it to
run in the background when using
other features increases the demand
on battery power and reduces the
battery life.
select Start.
appears in standby mode with the
countdown timer set. When the time
runs out, your device sounds an alarm,
displays the timer note, vibrates (if
set), and flashes its lights.
Measure time
Press any key during the alarm to stop
the alarm. After 30 seconds the timer
alert stops automatically.
1. In standby mode, select Menu >
Organiser > Stopwatch > Split
timing or Lap timing > Start. The
running time is displayed.
Change the time
Split timing—You can use the split
time function for such things as a
long distance race when you need
to pace yourself. Select Split to
note the lapsed time. The timer
continues to run and the split time
appears below the running time.
Each time you select Split, the new
measured time appears at the
beginning of the list.
After you have set the timer, you can
change the time.
1. With a normal timer set, in standby
mode, select Menu > Organiser >
Timer > Change time.
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a
new note, and select Start.
Interrupt the timer
Lap timing—You can use the lap
time function when you want to
track how long it takes to complete
each cycle or lap. Select Lap to
note the lap time. The clock stops,
then starts immediately from zero.
The lap time appears below the
running time. Each time you select
After you have set the timer, you can
stop the timer. In standby mode, select
Menu > Organiser > Timer > Stop
timer.
Copyright © 2005 Nokia. All rights reserved.
67
O r g a n i s e r
Lap, the new measured time
Options
You can choose the following options
appears at the beginning of the list.
2. Select Stop to end the timing and
display the total time or Stop >
Options > Start or Reset to
when you use the stopwatch:
Continue—Appears when the
stopwatch is working in the
background.
continue or reset timing.
Show last— Appears when you have
saved a split or lap time and displays
the last time saved.
Lap and split times
To save a time while the clock is
running, select Stop > Save, enter a
name for the measurement, and select
OK. If you do not enter a name, the
total time is used as the default title
for the lap or split time.
Split timing—Asks if you want to
discontinue previous timing.
Lap timing—Asks if you want to
discontinue previous timing.
To view a saved time, in standby mode, View times—Enables you to browse the
select Menu > Organiser >
saved times.
Stopwatch > Show last or View times.
Delete times—Enables you to delete
any saved times. You can delete the
saved times one by one or all at once.
To delete a saved time from
Stopwatch, select View times and the
time to delete, and select Delete > Yes;
or select Delete times > One by one or
Delete all.
Operation note
If you press the end key and return to
standby mode, the clock continues to
run in the background, and
appears in the upper left corner.
To return to the stopwatch screens,
in standby mode, select Menu >
Organiser > Stopwatch > Continue.
To stop the clock, select Stop.
Copyright © 2005 Nokia. All rights reserved.
68
E x t r a s
11. Extras
Challenge yourself or a friend to one of
the fun games in your device. Some
menus listed are network services.
Contact your wireless service provider
or network operator for more
from sources that offer
adequate protection against
harmful software.
information. To download games or
applications, select either the Games
or Collection menu.
■ Memory
You can view the size of memory
available for games or application
installations. In standby mode, select
Menu > Extras > Memory.
■ Games
In standby mode, select Menu > Extras
> Games to display the games on your
device: Games are Snake Ex2 and
Galaxy Balls.
Note: Only install applications
from sources that offer
adequate protection against
harmful software.
■ Collection
Collections is a network service.
See "Network Services," p. vii. If your
wireless service provider or network
operator supports this feature, you will
find useful applications preinstalled on
your device. Also, you can manage and
download new Java applications that
may be offered by your wireless service
provider or network operator.
An application may require a few
seconds to load. When you open an
application, wait for the launch screen
to disappear. At that point, the
application is ready.
In standby mode, select Menu > Extras
> Collection and an application.
Copyright © 2005 Nokia. All rights reserved.
69
M o b i l e w e b
12. Mobile web
Minibrowser is a network service. See
"Network Services," p. vii.
■ Mobile Internet
access
Your device has a built-in browser you
can use to connect to selected services
on the mobile internet. If your wireless
service provider or network operator
supports this feature, then you can
view weather reports, check news or
flight times, view financial
Because mobile Internet content is
designed to be viewed from your
device, your wireless service provider
or network operator is now your
mobile Internet service provider as
well.
It is likely that your wireless service
provider or network operator has
created a home page and set up your
browser to go to this page when you
log on to the mobile Internet. At your
service provider’s home page, you may
find links to a number of other sites.
information, and much more. The web
browser on your device can display
WAP-based content.
Your device may have some bookmarks
loaded for sites not affiliated with
Nokia. Nokia does not warrant or
endorse these sites. If you choose to
access them, you should take the same
precautions, for security or content, as
you would with any internet site.
It should not be necessary to manually
configure the browser on your device.
Normally this is done by your wireless
service provider or network operator
after you subscribe to the feature.
Contact your wireless service provider
or network operator if you have
The security icon does not indicate
that the data transmission between
the gateway and the content server (or
place where the requested resource is
stored) is secure. The service provider
secures the data transmission between
the gateway and the content server.
problems using the browser.
Copyright © 2005 Nokia. All rights reserved.
70
M o b i l e w e b
Receive a call while online
If your data connection is not active,
you may still be able to receive a voice
call while using the WAP browser.
■ Sign on
In standby mode, select Menu >
Mobile web.
After a brief pause, your device
attempts to connect to your wireless
service provider or network operator’s
home page. If you receive an error
message, your device may not be set up
for browsing. Contact your wireless
service provider or network operator to
make sure that your device is
•
To answer the incoming call, press
the call key.
•
To reject the incoming call, press
the end key (a carrier-dependent
feature).
While in the voice call, you are not able
to load new pages in the browser.
configured properly.
Note: If your data connection
is active, the incoming calls
are automatically diverted to
voice mail, depending on your
carrier.
■ Navigate the mobile
Internet
Since your device screen is much
smaller than a computer screen,
mobile Internet content is displayed
differently than you may be
accustomed to seeing. This section
contains guidelines for using the keys
to navigate a WAP site.
Make an emergency call
while online
You can end your data connection and
make an emergency call.
1. To close your mobile Internet
connection, press the end key.
Phone keys
•
Press the power key to display the
minibrowser home screen.
2. Press the end key as many times as
needed to clear the display and
ready the device for calls.
•
Scroll up or down to browse the
WAP site.
3. Enter the emergency number for
your present location (for example,
111 or 000 or 911). Emergency
numbers vary by location.
•
•
Select an item.
To enter letters and numbers, press
a key from 0–9.
4. Press the call key.
•
To enter special characters, press *.
Copyright © 2005 Nokia. All rights reserved.
71
M o b i l e w e b
Clear the cache and
disconnect
A cache is a memory location that is
used to store data temporarily. If you
have tried to access or have accessed
confidential information requiring
passwords, empty the cache after each
use. The information or services you
have accessed are stored in the cache.
To empty the cache while in the
browser menu, select Menu >
Advanced > Clear > Cache from the
home page. To clear the cache and
power off your device, press and hold
the power key.
To close your mobile internet
connection while browsing, press the
end key.
Copyright © 2005 Nokia. All rights reserved.
72
P C c o n n e c t i v i t y
13. PC connectivity
3. Click on the folders to display a
window that shows the contents of
the folder on the device.
■ USB data transfer
You can transfer data such as music,
photos, and videos from your device to
a compatible PC or from a compatible
PC to your device using a DKU-2 USB
data cable. The cable is connected to
your device correctly when the
4. Open a second instance of
Windows Explorer, and display the
contents of the folder on your PC
where you have MP3 files, photo
files, or video files stored.
arrowhead points toward the display
screen. Disconnect the USB data cable
from the device to make a call.
5. Select the files on your PC that you
want to transfer to the device.
Use the Nokia Audio Manager software
to handle your music files, and transfer 6. Drag and drop the files from the
them from the PC to your device. See
"Nokia PC Suite," p. 74.
second window into the first
window, and place them in a folder.
7. The files are transferred to the
device and can be played or
Transfer with Windows
Explorer
accessed by the media player.
After you have installed the Nokia
Audio Manager, it is possible to use
Windows Explorer to transfer music,
photo, and video files to your device
and from your device to your PC.
If you select files that require more
memory than the memory capacity
of the device, an error note
appears. Deselect some of the files
until the selected files fit the
memory.
1. Connect your PC and your device
with a DKU-2 USB cable. Data
enhancement connected is
8. Disconnect the USB cable by
double-clicking the green arrow on
the taskbar at the bottom of your
PC screen. A pop-up window
displayed on your device.
2. Open Windows Explorer. Your
device appears as a local drive
(named by Nokia 3155) with a drive
letter assigned to it.
displays Unplug orEject Hardware.
9. Click on USB device in the
hardware devices window. A pop-
up window displays Stop a
Hardware device.
Copyright © 2005 Nokia. All rights reserved.
73
P C c o n n e c t i v i t y
10. Highlight USB device and click OK. from the software downloads
The pop-up window displays Safe
to Remove Hardware, with The
‘USB Device’ device can now be
safely removed from the system.
Select OK.
Some of the features in your device
require network support. Contact your
service provider for availability and
configuration instructions.
Important: To ensure that all
memory card operations are
completed in a controlled
way, do not unplug the
•
•
•
Nokia Image Converter makes
images usable for multimedia
messages or wallpapers and
transfers them to your device.
connectivity cable until
Nokia Sound Converter edits
polyphonic ringing tones to be
compatible with your device and
transfers them to your device.
Windows notifies you that it is
safe to do so. Uncontrolled
completion of the memory
card operations may cause the
memory card and the
Nokia Content Copier copies
information or backs up
information from your device to
the PC or to another compatible
Nokia device.
information stored on it to
become corrupted. A
corrupted memory card may
have to be formatted before it
can be used again. When a
memory card is formatted, all
information on the card is
permanently lost.
•
•
Nokia Phone Editor sends text
messages and edits the contact
directory and message settings of
your device.
Nokia PC Sync synchronises the
contacts directory and calendar
between your device and a
compatible PC.
■ Nokia PC Suite
Nokia PC Suite software is available for
the Nokia 3155. Nokia PC Suite is a
collection of powerful tools that you
can use to manage your device
•
•
Nokia Connection Manager selects
the connection type between the
PC and the device.
features and data. Each component is a
separate program that includes online
installation instructions, and other
documentation, which are provided
free of charge and can be downloaded
Nokia Phone Browser copies
images and tones from your device
to your PC and vice versa.
Copyright protection may prevent
some images, ring tones, and other
content from being copied, modified,
transferred, or diverted.
Copyright © 2005 Nokia. All rights reserved.
74
E n h a n c e m e n t s
14. Enhancements
Check the model number of any
charger before use with this device.
This device is intended for use
when supplied with power from AC-3
or AC-4.
Power:
•
•
•
•
•
Standard Li-Ion Battery (BL-6C)
Standard Travel Charger (AC-3)
Travel Charger (AC-4)
Warning: Use only batteries,
chargers and enhancements
approved by Nokia for use
with this particular model.
The use of any other types
may invalidate any approval
or warranty, and may be
Mobile Charger (DC-4)
Charger Adapter (CA-44)
dangerous. For availability of
approved enhancements,
please check with your dealer.
A few practical rules about
accessories and enhancements:
•
Keep all accessories and
enhancements out of the reach of
small children.
•
When you disconnect the power
cord of any accessory or
enhancement, grasp and pull the
plug, not the cord.
•
•
Checkregularlythatenhancements
installed in a vehicle are mounted
and are operating properly.
Installation of any complex car
enhancements must be made by
qualified personnel only.
Copyright © 2005 Nokia. All rights reserved.
75
B a t t e r y i n f o r m a t i o n
15. Battery information
Use the battery only for its intended
purpose. Never use any charger or
battery that is damaged.
■ Charging and
discharging
Your device is powered by a
Do not short-circuit the battery.
Accidental short-circuiting can occur
when a metallic object such as a coin,
clip, or pen causes direct connection of
the positive (+) and negative (-)
terminals of the battery. (These look
like metal strips on the battery.) This
might happen, for example, when you
carry a spare battery in your pocket or
purse. Short-circuiting the terminals
may damage the battery or the
rechargeable battery. The full
performance of a new battery is
achieved only after two or three
complete charge and discharge cycles.
The battery can be charged and
discharged hundreds of times, but it
will eventually wear out. When the talk
and standby times are noticeably
shorter than normal, replace the
battery. Use only Nokia approved
batteries, and recharge your battery
only with Nokia approved chargers
designated for this device.
connecting object.
Leaving the battery in hot or cold
places, such as in a closed car in
summer or winter conditions, will
reduce the capacity and lifetime of the
battery. Always try to keep the battery
between 15°C and 25°C (59°F and
77°F). A device with a hot or cold
battery may not work temporarily,
even when the battery is fully charged.
Battery performance is particularly
limited in temperatures well below
freezing.
If a replacement battery is being used
for the first time or if the battery has
not been used for a prolonged period, it
may be necessary to connect the
charger then disconnect and reconnect
it to begin charging the battery.
Unplug the charger from the electrical
plug and the device when not in use.
Do not leave a fully charged battery
connected to a charger, since
overcharging may shorten its lifetime.
If left unused, a fully charged battery
will lose its charge over time.
Do not dispose of batteries in a fire as
they may explode. Batteries may also
explode if damaged. Dispose of
batteries according to local
regulations. Please recycle when
possible. Do not dispose as household
waste.
If the battery is completely discharged,
it may take a few minutes before
the charging indicator appears on
the display or before any calls can
be made.
Copyright © 2005 Nokia. All rights reserved.
76
B a t t e r y i n f o r m a t i o n
2. When you angle the hologram left,
right, down, and up, you should see
1, 2, 3, and 4 dots on each side
respectively.
■ Nokia battery
authentication
guidelines
Always use original Nokia batteries for
your safety. To check that you are
getting an original Nokia battery,
purchase it from an authorized Nokia
dealer, look for the Nokia Original
Enhancements logo on the packaging
and inspect the hologram label using
the following steps:
3. Scratch the side of the label to
reveal a 20-digit code, for example,
12345678919876543210. Turnthe
battery so that the numbers are
facing upwards. The 20-digit code
reads starting from the number at
the top row followed by the
Successful completion of the four
steps is not a total assurance of the
authenticity of the battery. If you have
any reason to believe that your battery
is not an authentic original Nokia
battery, you should refrain from using
it, and take it to the nearest authorized
Nokia service point or dealer for
bottom row.
assistance. Your authorized Nokia
service point or dealer will inspect the
battery for authenticity. If authenticity
cannot be verified, return the battery
to the place of purchase.
Authenticate hologram
1. When looking at the hologram on
the label, you should see the Nokia
connecting hands symbol from one
angle and the Nokia Original
Enhancements logo when looking
from another angle.
Copyright © 2005 Nokia. All rights reserved.
77
B a t t e r y i n f o r m a t i o n
To create a text message enter the
20-digit code, for example,
may result in poor performance and
damage to your device and its
12345678919876543210, and send to enhancements. It may also invalidate
+44 7786 200276.
any approval or warranty applying to
the device.
To create a text message,
To find out more about original
Nokia batteries, visit
•
For countries in Asia Pacific,
excluding India: Enter the 20-digit
code, for example,
12345678919876543210, and
send to +61 427151515.
•
For India only: Enter Battery
followed by the 20-digit battery
code, for example, Battery
12345678919876543210,
and send to 5555.
National and international operator
charges will apply.
You should receive a message
indicating whether the code can be
authenticated.
If you need assistance confirming the
battery code, contact your local Nokia
asia.com/carecentrelocator.
What if your battery is
not authentic?
If you cannot confirm that your Nokia
battery with the hologram on the label
is an authentic Nokia battery,
please do not use the battery. Take it to
the nearest authorized Nokia service
point or dealer for assistance. The use
of a battery that is not approved by the
manufacturer may be dangerous and
Copyright © 2005 Nokia. All rights reserved.
78
C a r e a n d m a i n t e n a n c e
Care and maintenance
Your device is a product of superior
design and craftsmanship and should
be treated with care. The suggestions
below will help you protect your
warranty coverage.
•
Do not drop, knock, or shake the
device. Rough handling can break
internal circuit boards and fine
mechanics.
•
•
•
Do not use harsh chemicals,
cleaning solvents, or strong
detergents to clean the device.
•
Keep the device dry. Precipitation,
humidity, and all types of liquids or
moisture can contain minerals that
will corrode electronic circuits. If
your device does get wet, remove
the battery, and allow the device to
dry completely before replacing it.
Do not paint the device. Paint can
clog the moving parts and prevent
proper operation.
Use a soft, clean, dry cloth to clean
any lenses, such as camera,
proximity sensor, and light sensor
lenses.
•
Do not attempt to remove the
battery from the device. Nokia
recommends that you take the
device to the nearest authorised
service facility for replacement of
the battery.
•
Use only the supplied or an
approved replacement antenna.
Unauthorised antennas,
modifications, or attachments
could damage the device and may
violate regulations governing radio
devices.
•
•
Do not use or store the device in
dusty, dirty areas. Its moving parts
and electronic components can be
damaged.
•
•
Use chargers indoors.
Do not store the device in hot
areas. High temperatures can
shorten the life of electronic
devices, damage batteries, and
warp or melt certain plastics.
Always create a backup of data you
want to keep, such as contacts and
calendar notes, before sending
your device to a service facility.
All of the above suggestions apply
equally to your device, battery,
charger, or any enhancement. If any
device is not working properly, take it
to the nearest authorised service
facility for service.
•
Do not store the device in cold
areas. When the device returns to
its normal temperature, moisture
can form inside the device and
damage electronic circuit boards.
•
Do not attempt to open the device
other than as instructed in this
guide.
Copyright © 2005 Nokia. All rights reserved.
79
A d d i t i o n a l s a f e t y i n f o r m a t i o n
Additional safety information
Your device and its enhancements may manufacturer of the medical device to
contain small parts. Keep them out of
the reach of small children.
determine if they are adequately
shielded from external RF energy or if
you have any questions. Switch off
your device in health care facilities
when any regulations posted in these
areas instruct you to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
■ Operating
environment
Remember to follow any special
regulations in force in any area and
always switch off your device when its
use is prohibited or when it may cause
interference or danger. Use the device
only in its normal operating positions.
This device meets RF exposure
PACEMAKERS
Pacemaker manufacturers recommend
that a minimum separation of 6 inches
(15.3 cm) be maintained between a
wireless device or phone and a
pacemaker to avoid potential
guidelines when used either in the
normal use position against the ear or
when positioned at least 2.2 cm (7/
8 inches) away from the body. When a
carry case, belt clip or holder is used
for body-worn operation, it should not
contain metal and should position the
device the above-stated distance from
your body. In order to transmit data
files or messages, this device requires a
good quality connection to the
network. In some cases, messages may
be delayed until such a connection is
available. Ensure the above separation
distance instructions are followed until
the transmission is completed.
interference with the pacemaker.
These recommendations are consistent
with the independent research by and
recommendations of Wireless
Technology Research. To minimise the
potential for interference, persons with
pacemakers should
•
Always keep the device more than
6 inches (15.3 cm) from their
pacemaker when the device is
switched on
•
•
Not carry the device in a breast
pocket
Hold the device to the ear opposite
the pacemaker to minimise the
potential for interference.
■ Medical devices
Operation of any radio transmitting
equipment, including wireless phones,
may interfere with the functionality of
inadequately protected medical
If you have any reason to suspect that
interference is taking place, switch off
your device immediately.
devices. Consult a physician or the
Copyright © 2005 Nokia. All rights reserved.
80
A d d i t i o n a l s a f e t y i n f o r m a t s i o n
FCC regulations prohibit using your
HEARING AIDS
wireless device while in the air. The use
of wireless telephones in an aircraft
may be dangerous to the operation of
the aircraft, disrupt the wireless
Some digital wireless devices may
interfere with some hearing aids. If
interference occurs, consult your
service provider.
telephone network, and may be illegal.
■ Vehicles
■ Potentially explosive
RF signals may affect improperly
installed or inadequately shielded
electronic systems in motor vehicles
such as electronic fuel injection
systems, electronic antiskid (antilock)
braking systems, electronic speed
control systems, air bag systems. For
more information, check with the
manufacturer or its representative of
environments
Switch off your device when in any
area with a potentially explosive
atmosphere and obey all signs and
instructions. Potentially explosive
atmospheres include areas where you
would normally be advised to turn off
your vehicle engine. Sparks in such
your vehicle or any equipment that has areas could cause an explosion or fire
been added.
resulting in bodily injury or even death.
Switch off the device at refuelling
points such as near gas pumps at
service stations. Observe restrictions
on the use of radio equipment in fuel
depots, storage, and distribution areas,
chemical plants or where blasting
operations are in progress. Areas with
a potentially explosive atmosphere are
often but not always clearly marked.
They include below deck on boats,
chemical transfer or storage facilities,
vehicles using liquefied petroleum gas
(such as propane or butane), and areas
where the air contains chemicals or
particles such as grain, dust or metal
powders.
Only qualified personnel should service
the device, or install the device in a
vehicle. Faulty installation or service
may be dangerous and may invalidate
any warranty that may apply to the
device. Check regularly that all
wireless device equipment in your
vehicle is mounted and operating
properly. Do not store or carry
flammable liquids, gases, or explosive
materials in the same compartment as
the device, its parts, or enhancements.
For vehicles equipped with an air bag,
remember that an air bags inflate with
great force. Do not place objects,
including installed or portable wireless
equipment in the area over the air bag Failure to observe these instructions
or in the air bag deployment area. If in- may lead to suspension or denial of
vehicle wireless equipment is
improperly installed and the air bag
inflates, serious injury could result.
telephone services to the offender,
legal action, or both.
Copyright © 2005 Nokia. All rights reserved.
81
A d d i t i o n a l s a f e t y i n f o r m a t s i o n
profile to activate the device function
before you can make an emergency
■ Emergency calls
Important: Wireless phones,
including this device, operate
call. Consult this guide or your service
provider. When making an emergency
call, give all the necessary information
as accurately as possible. Your wireless
device may be the only means of
communication at the scene of an
accident. Do not end the call until
given permission to do so.
using radio signals, wireless
networks, landline networks,
and user-programmed
functions. Because of this,
connections in all conditions
cannot be guaranteed. You
should never rely solely on any
wireless device for essential
communications like medical
emergencies.
■ Certification information
(SAR)
THIS DEVICE MEETS INTERNATIONAL
GUIDELINES FOR EXPOSURE TO RADIO
WAVES
To make an emergency call, make sure
your device is properly charged before
attempting any emergency calls. If
your battery becomes empty, you
cannot receive or make calls, including
emergency calls and must wait a few
minutes after the charging begins to
place your call.
Your mobile device is a radio
transmitter and receiver. It is designed
and manufactured not to exceed the
limits for exposure to radio frequency
(RF) recommended by international
guidelines (ICNIRP). These limits are
part of comprehensive guidelines and
establish permitted levels of RF energy
for the general population. The
guidelines were developed by
independent scientific organizations
through periodic and thorough
evaluation of scientific studies. The
guidelines include a substantial safety
margin designed to assure the safety of
all persons, regardless of age and
health.
1. If the device is not on, switch it on.
Check for adequate signal strength.
Some networks may require that a
valid UIM (CDMA SIM) card is
properly inserted in the device.
2. Press the end key as many times as
needed to clear the display and
ready the device for calls.
3. Enter the official emergency
number for your present location,
and press the call key. Emergency
numbers vary by location
The exposure standard for mobile
devices employs a unit of
measurement known as the Specific
Absorption Rate, or SAR. The SAR limit
stated in the international guidelines is
2.0 watts/kilogram (W/kg)*. Tests for
If certain features are in use, you may
first need to turn those features off
before you can make an emergency
call. If the device is in an offline or
flight mode you must change the
Copyright © 2005 Nokia. All rights reserved.
82
A d d i t i o n a l s a f e t y i n f o r m a t i o n
SAR are conducted using standard
operating positions with the device
transmitting at its highest certified
power level in all tested frequency
national reporting requirements and
the network band. For SAR information
in other regions, please look under
product information at
at the highest certified power level, the
actual SAR of the device while
■ Battery information
operating can be well below the
maximum value. This is because the
device is designed to operate at
multiple power levels so as to use only
the power required to reach the
network. In general, the closer you are
to a base station, the lower the power
output of the device.
This section provides information
about battery charging times with the
Travel Charger (AC-4) and the
Standard Travel Charger (AC-3), talk
and standby times. Be aware that the
information in this section is subject to
change. For more information, contact
your service provider.
The highest SAR value for this device
when tested for use at the ear is
0.86 W/kg.
Charging times
The following charging times are
approximate with the BL-6C Li-Ion
battery:
SAR values may vary depending on
national reporting and testing
requirements and the network band.
Use of device accessories and
enhancements may result in different
SAR values. Additional SAR
Travel Charger (AC-4): Up to 1 hour
45 minutes
Standard Travel Charger (AC-3): Up
to 3 hours 30 minutes
information may be provided under
product information at
Talk and standby times
Operation times are estimates only and
depend on signal strength, phone use,
network conditions, features used,
battery age and condition (including
charging habits), temperatures to
which the battery is exposed, and other
factors.
* The SAR limit for mobile devices used
by the public is 2.0 W/kg averaged over
10 grams of body tissue. The guidelines
incorporate a substantial margin of
safety to give additional protection for
the public and to account for any
variations in measurements.
Talk time: 3 to 4 hours (digital)
SAR values may vary depending on
Standby time: 6 to 10 days
Copyright © 2005 Nokia. All rights reserved.
83
Index
Call duration 31
Call forwarding 59
Call register 30
A
About your device vii
Activate 59
Call restrictions 57
Call settings 49
Activate a voice command 54
Activate an equaliser set 44
Activate or deactivate 14
Alarm clock 61
Alarm conditions 61
Allow numbers 56
Call summary 51
Caller groups 35
Calling card 50
Calls
answering 10
Allow or block advertisements 24
Allow or block multimedia
reception 23
in-call options 11
making 9
Cancel 59
An incoming call 10
Care and maintenance 79
Certification information (SAR) 82
Change default number 35
Change sending options 20
Change speed dial numbers 36
Change time 67
Answer a call with the
keypad locked 11
Antenna 6
Anykey answer 49
Application setting 58
Assign a key to speed dial 35
Assign a voice tag to a command 53
Assign a voice tag to an entry 36
Automate voicemail 27
Automatic redial 49
Charger
information 76
times 83
Choose a banner 48
Choose Go to functions 5
Clear the cache 72
Clear voice mail icon 29
Collections 69
B
Back cover
removing 7
replacing 8
Colour schemes 48
Compose and send 21
Conference calling 10
Configure settings 38
Contacts list 10, 34
add 34
Backlight timeout 48
Batteries and chargers 76
Battery
charging 8
charging times 83
information 76, 83
removing 7
delete 38
edit 37
replacing 7
send 39
talk and standby times 83
Battery information 76
Business cards 39
view 38
Countdown timer 66
Create a custom equaliser set 44
Currency converter 66
C
Calculator 65
D
Calendar 62
Data or fax calls 51
Data transfer 51
Call and setup voice mail 27
Copyright © 2005 Nokia. All rights reserved.
84
Date and time auto-update 49
Date setting 48
I
Indicators and icons 2
International prefix 51
Interrupt timer 67
Delete all messages in a folder 19
Delete speed dial numbers 36
Deleting call registers 31
Dial a number 36
Dialling codes 28
K
Display language 52
Keyguard 12
automatic 52
Keypad 9
Display settings 47, 48
Distribution list 19
DTMF tones 52
Keys and parts 1
E
L
Emergency calls 82
while using wireless Internet 71
with keypad locked 52
Enhancement settings 54
handsfree 54
Languages 52
Lap and split times 68
Last dialled number 10
Listen to voice messages 27
Lock code 56
Loopset 55
Loudspeaker 11
headset 54
loopset 55
music stand 55
Enhancements 75
Extras 69
M
Make calls 50
Measure time 67
Media equaliser 44
Media player 42
Medical devices 80
Memory 52, 69
F
Factory settings 60
Feature codes 59
Folders 40
Message folders 18
Messages
G
delete 19
Gallery 40, 42
minibrowser messages 29
text messages 15
voice messages 27
Minibrowser 70
Games 69
Get the most out of this guide 3
Go to a date 62
Go to functions 5
Minibrowser duration 33
Minibrowser messages 29
MMS folders 24
MMS settings 23
Mobile web 70
Mode 58
Multimedia messages 22
Music stand 55
H
Handsfree 54
Hands-free operation 53
Headset 9, 54
HEARING AIDS 81
Help text 4, 53
Copyright © 2005 Nokia. All rights reserved.
85
Receive notes 64
N
Record speech or sound 44
Repeat alarm 61
Network services vii, 59
Nokia battery authentication
guidelines 77
Reply to multimedia message 26
Restore factory settings 60
Retrieve or reject multimedia
messages 23
Ringing tone for no caller ID 51
Nokia PC Suite 74
Note a specific date 62
Notes 64
Numbers (123) 13
O
S
Open 62
Safety vi
Open fold to answer 50
Operating environment 80
Operation note 68
Options 43, 44, 54, 68
Options while viewing a list of notes
63
important safety information 80
Save an entry 34
Save contact name and number 34
Save information 50
Save messages 18
Save numbers and text items 34
Screen saver 48
Organise functions 5
Organiser 61, 65
Other MMS settings 24
Scrolling 4
Search for a name 38
Security feature 4
Security settings 55
Send a business card 39
Send a note 63
P
PACEMAKERS 80
PC connectivity 73
Personalise a profile 46
Phone at a glance 1
Phone keys 71
Phone lock 55
change lock code 56
Phone menus 3
Set
time 48
Set length 52
Set or change alarm setting 61
Set the alarm tone 61
Set the timer 66
Set type 52
Setting up phone 6
Settings 46
Phone numbers with dialling codes 28
Phone settings 52
Picture messages 21
picture messages 21
Potentially explosive environments 81
Power saver 48
Shared memory viii
Snooze time-out 61
Speed dial 49
Predictive text 13
Profiles 46
Speed dials 35
Standard mode 13
Standby mode 2
Q
Start screen 2
Start-up tone 53
Stopwatch 67
Quick keys 2
R
T
Radio 42
Talk and standby times 83
Text (Abc) 13
Read multimedia messages 26
Receive and save 21
Copyright © 2005 Nokia. All rights reserved.
86
Text entry 13
W
predictive text 13
Wallpaper 47
standard 13
Text messages 15
Themes 47
Wireless Internet 70
make an emergency call 71
receive a call while online 71
sign off 72
Time and date settings 48
Timed profiles 46
To-do list 64
sign on 71
Write and send multimedia
messages 24
Write down voice mailbox number and
process 28
To-do note
add 64
view 65
Tone settings 47, 58
Transfer with Windows Explorer 73
Tune and save a radio channel 43
Turn an alarm off 62
turn phone off 9
Turn phone on 9
Turn the radio on and off 42
U
UIM card slot 7
USB data transfer 73
V
Vehicles 81
View
call duration 31
call times 31
data/fax call duration 32
dialled numbers 31
minibrowser duration 32
missed calls 30
received calls 30
saved messages 18
to-do note 65
View notes (day view) 62
Voice dialling 36, 53
Voice messages 27
Voice privacy 57
Voice recorder 43
Voice tags 37
Voicemail 27
Volume
adjusting 11
using the loudspeaker 11
Copyright © 2005 Nokia. All rights reserved.
87
|