Model: RV-DOCK
Installation and User Manual
Any model of IPOD with a dock connector can fit perfectly into a single RV-DOCK through the use of Interchangeable Dock Adapters
and an Insert. Dock Housing connects to any cable with a connector.
Installation
The RV-DOCK has 2-way mounting capability: Surface or Dash
Dash Mounting:
mount. The housing can be installed vertically or horizontally.
Choose a mounting location that provides easy access for the
user.
1. Use the enclosed RV-DOCK-TEMPLATE to mark where you
want to mount the Docking Station.
Note 1: Make sure there is enough room behind the dash
to mount the Dock Housing.
Note 2: When cutting the hole into the dash make sure
there are no cables or wires that can be accidentally cut.
2. Secure the Dash-Mount Housing to the Dock Housing
using the supplied screws.
3. Secure the Dock Housing to the dash using the supplied
mounting screws.
4. Snap-on the Bezel.
t
n
o
r
F
5. Attach the connector to the bottom of the housing.
Vertical Mount
Horizontal Mount
4. Snap-on Bezel
3. Mounting Screws
(supplied)
Surface Mounting:
1. Secure the Dock Housing in place by using the supplied
mounting screws.
Dash-Mount
Housing
2. Attach the IPOD connector to the bottom of the housing.
2. Housing Screws
(supplied)
Mounting Screws
(supplied)
Dock Housing
1. Hole in Dash
Dock Housing
5. Connector Cable
(not supplied)
Connector Cable (not
supplied)
|