C308S
INSTRUCTION MANUAL
Contents
Warnings and Precautions ............................................................................... 2
Important Safety Instructions............................................................................ 3
In the Box & Features....................................................................................... 4
Powering the Unit............................................................................................. 5
Setting the Clock, Sleep Timer, & Alarms......................................................... 6
Listening to the Radio & Nature Sounds .......................................................... 7
Location of Controls & Definitions ............................................................... 8-11
Service Information......................................................................................... 12
Important Safety Instructions
1. Read Instructions - All the safety and operating instruction should be read
before the product is operated.
15. Outdoor Antenna Grounding - If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and supporting structure, grounding
of the mast and supporting structure, grounding of the lead-in wire to an
antenna-discharge unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
ꢀ. Retain Instructions - The safety and operating instruction should be
retained for future reference.
3. Heed Warnings - All warning on the product and in the operating
instructions should be adhered to.
4. Follow instructions - All operating and use instructions should be
followed.
See figure:
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement,
or near a swimming pool, and the like.
8. Accessories - Do not place this product on an unstable cart, stand tripod,
bracket, or table. The product may fall, causing serious injury to a child
or adult, and serious damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold with
the product. Any mounting of the product should follow the manufacturer’s
instructions, and should use a mounting accessory recommended by the
manufacturer.
16. Lightning - For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the product due to lightning and power-line
surges.
9. A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
17. Power Lines - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
18. Overloading - Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
19. Object and Liquid Entry - Never push objects of any kind into this
product through openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the product.
10. Ventilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided
or the manufacturer’s instruction have been adhered to.
ꢀ0. Servicing - Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
ꢀ1. Damage Requiring Service - Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
11. Power Sources - This product should be operated only from the type of
power source indicated on the marking label. If you are not sure of the type
of power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other
sources, refer to the operating instruction.
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
1ꢀ. Grounding or Polarization - This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the
polarizes plug.
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
Alternate Warnings - This product is equipped with a three-wire grounding-
type plug, a plug having a third (grounding) pin. This plug will only fit into
a grounding-type power outlet. This is a safety feature. If you are unable
to insert the plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the grounding-type
plug.
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this
indicates a need for service.
ꢀꢀ. Replacement Parts - When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufacturer
or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
13. Power-Cord Protection - Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and point where they exit from the product.
ꢀ3. Safety Check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
14. Protective Attachment Plug - The product is equipped with an
attachment plug having overload protection. This is a safety feature. See
Instruction Manual for replacement or resetting of protective device. If
replacement of the plug is required, be sure the service technician has
used a replacement plug specified by the manufacturer that has the same
overload protection as the original plug.
ꢀ4. Wall or Ceiling Mounting - The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.
ꢀ5. Heat - The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
3
In the Box
• C308S
• Documentation
Features
• AM/FM Digital Clock Radio
• Dual Alarm
• Wake to Radio, Buzzer or Nature
Sounds
• Snooze Function
• Sleep Function
• 0.9” Red LED Display
• Display Dimmer Control
• Built-In Speaker
• AC: 110V AC Line Cord built in
• Battery Backup for Clock - uses one “9-
Volt” Battery, (not included)
• 3 Nature Sounds
4
Powering the Unit
The unit can be powered by connecting the attached AC cord to a standard AC outlet
(1ꢀ0V~60Hz).
A 9-Volt battery can be inserted into the unit to serve as a back-up in case the power
goes out.
Please note, the back-up battery is not meant to power the unit at all times, but only in
case of an emergency or unexpected circumstances.
5
Setting the Clock
1. Adjust the Time/Lo/High Switch to Time.
1. Press the Up Button and Down Button to set the clock.
The Up Button cycles through the time quickly, while the Down Button cycles
through slowly.
Setting the Sleep Timer
1. Press and hold the Sleep Button.
ꢀ. While holding the Sleep Button, press the Up Button and Down Button to set the
sleep timer.
The Up Button cycles through the time quickly, while the Down Button cycles
through slowly.
3. Once the set sleep time expires, the unit will turn off.
Setting the Alarms
1. Press and hold the AL1 or AL2 Button.
ꢀ. While holding the AL1 or AL2 Button, press the Up Button and Down Button to
set the alarm 1 or alarm ꢀ.
The Up Button cycles through the time quickly, while the Down Button cycles
through slowly.
3. Adjust the Alarm 1 or Alarm 2 Switch on the side of the unit to the function that
will sound when the alarm goes off.
4. Once the set alarm time arrives, the unit will turn on to the set function.
5. After the alarm sounds, press the Snooze Button to delay the alarm for an
additional 10 minutes.
6. Press the Power Button to turn the alarm off until the set time arrives again.
6
Listening to the Radio
1. Press the Power Button to turn the unit on.
ꢀ. Adjust the NS/Radio Switch to Radio.
3. Adjust the AM/FM Switch to AM or FM.
4. Turn the Tuning Dial to adjust the AM or FM station.
AM and FM radio stations are displayed in the Frequency Display on the face of
the unit.
5. Turn the Volume Dial to adjust the volume of the unit.
Listening to Nature Sounds
1. Press the Power Button to turn the unit on.
ꢀ. Adjust the NS/Radio Switch to NS (Nature Sounds).
3. Adjust the Numbered NS Switch to 1 for ocean sounds, ꢀ for forest sounds, and 3
for white noise.
4. Turn the Volume Dial to adjust the volume of the unit.
7
Location of Controls
8
9
1
ꢀ
10
3
4
5
11
1ꢀ
6
7
8
Control Definitions
1
Numbered NS Switch
Adjust the Numbered NS Switch to 1 for ocean sounds, ꢀ for forest sounds, and 3
for white noise.
2
3
4
5
AL1 Button
Press the AL1 Button to set Alarm 1.
AL2 Button
Press the ALꢀ Button to set Alarm ꢀ.
Sleep Button
Press the Sleep Button to set the sleep timer.
Snooze Button
After alarm 1 or alarm ꢀ has sounds, press the Snooze Button to delay the alarm
for an additional 10 minutes.
6
LED Display
The LED displays the time, sleep time, and alarm time. It indicates when the time
is in the pm, and indicates when an alarm 1 or alarm ꢀ is set.
7
8
Frequency Display
The Frequency Display shows the current AM or FM radio station.
Time/Lo/High Switch
Adjust the Time/Lo/High switch to adjust the brightness of the LED Display.
•
Set the Time/Lo/High Switch to Time to set the clock.
9
NS/Radio Switch
Adjust the NS/Radio Switch to listen to nature sounds or the radio.
10 Power On/Off Button
Press the Power On/Off Button to turn the unit off and on.
11 Down Button
Press the Down Button to slowly cycle through the time, sleep time, and alarm
time.
12 Up Button
Press the Up Button to quickly cycle through the time, sleep time, and alarm time.
9
Location of Controls
13
17
18
14
15
19
16
10
Control Definitions
13 Alarm 1 Switch
Adjust the Alarm 1 Switch to turn the alarm off, or for alarm 1 to sound to a
buzzer, the radio, or nature sounds.
14 Alarm 2 Switch
Adjust the Alarm ꢀ Switch to turn the alarm off, or for alarm ꢀ to sound to a
buzzer, the radio, or nature sounds.
15 Volume Dial
Turn the Volume Dial to adjust the volume of the unit.
16 FM Wire Antenna
Adjust the FM Wire Antenna to improve reception for the FM Radio.
17 FM/AM Switch
Adjust the FM/AM Switch to change between AM and FM radio when in radio
mode.
18 Tuning Dial
Turn the Tuning Dial to tune the AM or FM radio.
19 AC Power Cord
Plug the AC Power Cord into a standard AC outlet (1ꢀ0V~60Hz) to power the unit.
11
Service Information
Address ꢀ116 Carr Street, St. Louis MO, 63106
Phone
Fax
Email
1-314-6ꢀ1-ꢀ881
1-314-588-1805
Website www.gpx.com
To download this Instruction Man- Para descargar este manual de Pour télécharger ce manuel
ual in English, Spanish, or French instrucción en inglés, español, o d’instruction en anglais, espagnol,
visit the Support section at
francés visite la sección de la ayu- ou le Français visitez la section de
©
ꢀ007 DPI, Inc. All trademarks appearing herein are the property of their respective owners. All products subject to change without notice.
|