Owner’s manual
Mode d’emploi
Manual de instrucciones
CZ109
CD/MP3/WMA RECEIVER
AUTORADIO CD/MP3/WMA
RECEPTOR CD/MP3/WMA
Thank you for purchasing this Clarion product.
∗ Please fully read this owner’s manual before operating this equipment.
∗ Check the contents of the enclosed warranty card and store it in a safe place with this manual.
Contents
1. FEATURES...................................................................................................................................... 3
2. PRECAUTIONS ............................................................................................................................... 4
3. CONTROLS ..................................................................................................................................... 5
Names of the Buttons and Their Main Functions ............................................................................. 5
4. DCP (DETACHABLE CONTROL PANEL)...................................................................................... 6
5. REMOTE CONTROL ....................................................................................................................... 7
Functions of Remote Control Unit Buttons....................................................................................... 7
Inserting the Battery ......................................................................................................................... 8
6. OPERATIONS.................................................................................................................................. 8
Basic Operations.............................................................................................................................. 8
Radio Operations ........................................................................................................................... 10
CD/MP3/WMA Operations ............................................................................................................. 11
Operations Common to Each Mode............................................................................................... 14
7. TROUBLESHOOTING................................................................................................................... 16
8. ERROR DISPLAYS ....................................................................................................................... 17
9. SPECIFICATIONS ......................................................................................................................... 18
1. FEATURES
• Built-in IR Eye (RCB176 Remote Included)
• 4ch/2V RCA Output with Non Fader Volume Control
• Front Panel 3.5mm Auxiliary Input
CZ109
3
2. PRECAUTIONS
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
CAUTION
USE OF CONTROLS, ADJUSTMENTS, OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN, MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
THE COMPACT DISC PLAYER SHOULD NOT
BE ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE
PERSONNEL.
CHANGES OR MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE
MANUFACTURER FOR COMPLIANCE
COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
If this equipment does cause harmful
interference to radio reception, which can be
determined by turning the equipment off and on,
the user is encouraged to consult the dealer or
an experienced radio technician for help.
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS
PRODUCT UNAPPROVED BY THE
MANUFACTURER WILL VOID THE
WARRANTY AND VIOLATE FCC APPROVAL.
Handling Compact Discs
• Compared to ordinary music CDs, CD-R and
CD-RW discs are easily affected by high
temperatures and humidity, potentially
making them unplayable. Therefore, do not to
leave them in the car for a long time.
• Do not stick labels on compact discs or mark
the surface with pens or pencils.
Display Screen
• In extreme cold, the screen movement may
slow down and the screen may darken, but
this is normal.
The screen will recover when it returns to
normal temperature.
4
CZ109
.
3. CONTROLS
Names of the Buttons and Their Main Functions
[
]
[
]
[
]
[
]
[
]
IR RECEIVER
RELEASE
BND
CD SLOT
[
] (EJECT)
[
]
AUX
[
]
[
]
[
]
SOUND
SRC
DISP
[
]
[
]
SCN
UP
[
]
[
]
[
]
DN
ISR
RPT
[
]
[
]
[
]
DIRECT
ROTARY
RDM
[RELEASE] button
• Press to unlock DCP.
[RDM] button
• Perform random play while in CD/MP3/WMA
mode.
[
] button
[RPT] button
• Perform preset scan while in the radio mode.
• Perform repeat play while in CD/MP3/WMA
mode.
• Play or pause a track while in CD/MP3/WMA
mode.
[SCN] button
• Perform scan play in CD/MP3/WMA mode.
[BND] button
• Change bands, or select seek tuning or
manual tuning while in radio mode.
[DISP] button
• Switch display mode.
[CD SLOT]
• Insert CDs here.
[ROTARY] knob
• Rotate to adjust the volume.
[IR RECEIVER]
• Receiver for remote control unit. (Operating
range: 30° all directions)
[ISR] button
• Recall ISR station stored in memory.
[AUX] input jack
• Input jack for connecting external device.
• Press and hold (2 sec.) to store current
station in ISR memory (radio mode only).
[SOUND] button
• Press to switch to the sound adjust mode.
[SRC] button
• Turn the power on/off.
[UP], [DN] buttons
• Select folders while in MP3/WMA mode.
[x], [v] buttons
• Commence fast-forward/fast-reverse mode.
[DIRECT] buttons
• Store radio stations in memory or recall it
directly while in radio mode.
[Q] (EJECT) button
• Press to eject disc.
CZ109
5
4. DCP (DETACHABLE CONTROL PANEL)
Removing the DCP
1. Press and hold the [SRC] button (1 sec.) to
CAUTION
• After removal, be careful not to drop the
DCP or subject it to strong impacts, to
prevent damage.
switch off power.
2. Press the [RELEASE] button.
[RELEASE] button
• Once the [RELEASE] button is pressed
and the DCP is unlocked, car vibrations
can cause the DCP to fall.
• The connector for the main unit and DCP
is extremely important. Be careful not to
damage it by pressing with fingernails or
sharp objects.
DCP Rear Panel
Main Unit Front
∗ DCP is unlocked.
3. Remove DCP.
DCP
connector
Main unit connector
Note:
DCP
• If the DCP is dirty, wipe off with a soft, dry cloth
only.
Attaching the DCP
1. Insert the right end of DCP into main unit.
2. Press left end of DCP into main unit.
2.
DCP
1.
6
CZ109
● Radio mode
[BND] button
• Switches reception band.
5. REMOTE CONTROL
Functions of Remote
Control Unit Buttons
∗ Some buttons on the remote have different
functions from those on the main unit.
[x], [v] buttons
• Change preset channels.
[SCN] button
• Press for preset scan play.
• Press and hold (2 sec.) for auto store.
Signal transmitter
● CD/MP3/WMA modes
[x], [v] buttons
• Press to select tracks.
• Press and hold (1 sec.) for fast-forward/fast-
reverse.
[
]
[
]
SRC
BND
[
] button
• Switches between playback and pause.
[SCN] button
• Press for scan play.
• In MP3/WMA mode, press and hold (1 sec.)
for folder scan play.
[
[
]
[
]
MUTE
DISP
]
ISR
[
]
RDM
[RPT] button
• Press for repeat play.
[
]
RPT
[
]
SCN
• In MP3/WMA mode, press and hold (1 sec.)
for folder repeat play.
[RDM] button
• Press for random play.
• In MP3/WMA mode, press and hold (1 sec.)
for folder random play.
● Shared modes
[SRC] button
• Press to turn on power.
Press and hold (1 sec.) to turn off power.
• Use to change operation mode.
[w], [z] buttons
• Increases/decreases volume.
[MUTE] button
• Turns mute function on/off.
[ISR] button
• Recalls ISR station stored in memory.
• Press and hold (2 sec.) to store current
station in ISR memory (radio mode only).
[DISP] button
• Press to select desired display.
CZ109
7
Inserting the Battery
1 Slide remote control unit’s rear cover in the
6. OPERATIONS
Note:
direction shown.
• Refer to the diagrams in “3. CONTROLS”
(page 5) when reading this chapter.
2 Insert battery (CR2025) into insertion guides
with printed side (+) up.
3 Press battery into compartment as shown.
Basic Operations
4 Replace and slide cover until it clicks into
place.
CAUTION
Be sure to lower the volume before
switching off the unit power or car’s ignition
key. The unit remembers its last volume
setting.
Turning power on/off
1. Press the [SRC] button to turn on power.
Insertion guide
2. Press and hold the [SRC] button (1 sec.) to
turn off power.
Selecting modes
1. Press the [SRC] button to change operation
mode.
Notes:
2. Each time the [SRC] button is pressed, the
Misuse may result in battery rupture and fluid
leakage, resulting in personal injury or damage.
Always follow these safety precautions:
operation mode changes as follows:
Radio ➜ CD/MP3/WMA ➜ AUX ➜ Radio...
• Use only the designated battery.
• When replacing the battery, insert with +/–
polarities correctly oriented.
Adjusting the volume
1. Turn the [ROTARY] knob clockwise to
increase volume; turn counterclockwise to
decrease volume.
• Do not subject battery to heat, or dispose in fire
or water. Do not attempt to disassemble the
battery.
• Dispose of used batteries properly.
∗ Volume range is 0 (minimum) to 33 (maximum).
Switching the display
Press the [DISP] button to select desired
display.
8
CZ109
3-4. Press the [
] button to return to the
Sound Adjustment
Sound effects and tone can be adjusted as
desired.
previous mode.
When set to “CUSTOM”:
3-2. Press and hold the [
] button (1 sec.).
Bass/treble characteristics become flat and
“FLAT” is show in the display.
To change sound settings
1. Press the [SOUND] button to switch to the
3-3. Turn the [ROTARY] knob to change to the
sound adjustment display.
“OFF” mode.
∗ The factory default sound setting is “Z-
● Adjusting the bass
This adjustment is supported only when
Z-Enhancer Plus is set to “CUSTOM”.
EHCR+”.
2. Press [x] or [v] to select the sound
adjustment mode.
2-1. Select “BASS”.
Each time [x] or [v] is pressed, the
sound adjustment mode changes as
follows:
3-1. Press the [
] button.
3-2. Press [x] or [v] to change and select
settings as follows:
“Z-EHCR+” ↔ “BASS” ↔ “TREBLE” ↔
“BALANCE” ↔ “FADER” ↔ “NF VOL”
“B<G 0>” ↔ “B<F 60>” ↔ “Q 1”
3-3. Turn the [ROTARY] knob to adjust values
∗ When “ENT” is flashing in the display, press
for gain, F (center frequency) and Q curve.
the [
] button to adjust the setting value.
B<G 0> :The factory default setting is “0”.
∗ The sound adjustment mode is displayed
for 2 seconds before showing the sound
setting.
(Adjustment range: +7 to –7)
B<F 60> :The factory default setting is
3. Turn the [ROTARY] knob to adjust the
“60”.
selected audio mode.
(Adjustment range:
60/80/100/200)
4. After completing settings, press the
[SOUND] button to return to the previous
mode.
Q 1
:The factory default setting is “1”.
(Adjustment range: 1/1.25/1.5/2)
3-4. Press the [
] button to return to the
● Setting the Z-Enhancer Plus
This unit has 4 sound tone effects stored in
memory.
previous mode.
● Adjusting the treble
This adjustment is supported only when
Z-Enhancer Plus is set to “CUSTOM”.
Select the effect you prefer.
∗ The factory default setting is “OFF”.
2-1. Select “Z-EHCR+”.
2-1. Select “TREBLE”.
3-1. Press the [
] button.
3-1. When you turn the [ROTARY] knob, the
3-2. Press [x] or [v] to change and select
tone effect changes as follows:
settings as follows:
“OFF” ↔ “B-BOOST” ↔ “IMPACT” ↔
“EXCITE” ↔ “CUSTOM”
“T<G 0>” ↔ “T<F 10K>”
3-3. Turn the [ROTARY] knob to adjust values
OFF
: No sound effect
for gain and F (center frequency).
B-BOOST : Enhanced bass
T<G 0> : The factory default setting is “0”.
IMPACT : Enhanced bass and treble
EXCITE : Enhanced bass, mid, and
(Adjustment range: +7 to –7)
T<F 10K>: The factory default setting is
treble
“10K”.
CUSTOM : User customized
(Adjustment range: 10K/12.5K/
15K/17.5K)
When set to “B-BOOST/IMPACT/EXCITE”:
3-2. Press the [
] button.
3-4. Press the [
] button to return to the
3-3. Turn the [ROTARY] knob to adjust the
previous mode.
setting (Setting range: –3 to +3).
∗ The factory default setting is “0”.
CZ109
9
● Adjusting the balance
2-1. Select “BALANCE”.
Radio Operations
3-1. Turn the [ROTARY] knob to adjust balance
Listening to broadcasts
between right and left speakers.
1. Press the [SRC] button and select radio
∗ The factory default setting is “CENTER”.
(Adjustment range: RIGHT12 to LEFT12)
mode.
2. Press the [BND] button and select the
reception band. Each time the button is
pressed, the band changes as follows:
● Adjusting the fader
2-1. Select “FADER”.
3-1. Turn the [ROTARY] knob to adjust balance
F1 (FM1) ➜ F2 (FM2) ➜ F3 (FM3) ➜ AM ➜
F1 (FM1)...
between front and rear speakers.
∗ The factory default setting is “CENTER”.
(Adjustment range: FRONT12 to REAR12)
Tuning
● Adjusting the non-fader volume
Adjust volume output from the unit’s non-fader
output terminal.
3 tuning modes are available: seek tuning,
manual tuning and preset tuning.
2-1. Select “NF VOL”.
3-1. Turn the [ROTARY] knob clockwise to
increase volume; turn counterclockwise to
decrease volume.
∗ The factory default setting is “0”.
(Adjustment range: +6 to –6)
Note:
Seek tuning
1. Press the [BND] button and select the
desired band (FM/AM).
∗ If “MANU” appears in the display, press and
hold the [BND] button (1 sec.). “MANU” will
turn off, and seek tuning will be enabled.
• When in the sound adjustment mode, if no
operation is performed for 10 seconds or more,
the mode is cancelled and the unit returns to the
previous mode.
2. Press [x] or [v] to automatically seek a
station.
Manual tuning
2 modes are available: Quick tuning and step
tuning.
Setting the MAGNA BASS EXTEND
The MAGNA BASS EXTEND function does not
adjust low frequencies like normal sound
adjustments, but emphasizes the deep bass
range with dynamic sound.
● Quick tuning
Press and hold [x] or [v] (1 sec.) to tune a
station.
● Step tuning
∗ The factory default setting is “OFF”.
Press [x] or [v] to manually tune a station.
1. Press and hold the [SOUND] button (1 sec.)
to enable MAGNA BASS EXTEND.
2. Press and hold the [SOUND] button (1 sec.)
Recalling a preset station
to disable MAGNA BASS EXTEND.
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) can be used to store broadcast
stations in memory. Press the corresponding
[DIRECT] button to automatically recall the
stored frequency.
10
CZ109
Manual memory
1. Use seek tuning or manual tuning to select
the desired station.
CD/MP3/WMA Operations
MP3/WMA
This unit supports to play MP3/WMA files.
2. Press and hold one of the [DIRECT] buttons
(2 sec.) to store the current station in preset
memory.
Notes:
• If you play a WMA file with active DRM (Digital
Rights Management), no audio is output (WMA
indicator flashes).
• Windows Media™, and the Windows ® logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/or
other countries.
Auto store
The auto store function stores up to 6 stations
automatically tuned in sequential order. If 6
stations cannot be found, any previously stored
station remains in its memory position.
1. Press the [BND] button and select the
● To disable DRM (Digital Rights
Management)
desired band (FM/AM).
1. In Windows Media Player 9/10/11, click on
TOOL ➜ OPTIONS ➜ MUSIC RECORD tab.
Under Recording settings, unclick the check
box for RECORD PROTECTED MUSIC.
Then reconstruct files.
2. Press and hold the [
] button (2 sec.). The
stations with good reception are stored
automatically to the preset channels.
∗ If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
Use personally constructed WMA files at
your own responsibility.
Preset scan
Preset scan sequentially receives stations
stored in preset memory. This function is useful
when searching for a station stored in the
memory.
Precautions when creating MP3/
WMA files
● Usable sampling rates and bit rates
1. MP3: Sampling rate: 8 kHz-48 kHz,
Bit rate: 8 kbps-320 kbps / VBR
2. WMA: Bit rate: 48 kbps-192 kbps
1. Press the [
2. When the desired station is received, press
the [ ] button again to continue receiving
that station.
Note:
• Do not press and hold the [
] button.
● File extensions
1. Always add a file extension “.MP3” or
“.WMA” to MP3 or WMA files using single
byte characters. If a different or no file
extension is appended, the file cannot be
played.
] button (2 sec.),
or the auto store function will begin and the unit
will begin storing stations.
2. Files without MP3/WMA data will not play.
Instead, “– –:– –” will appear in the play time
display.
Instant station recall (ISR)
The ISR function allows instant access to a
favorite preset station. The function operates
even when the unit is in other modes.
● Logical format (File system)
1. When writing MP3/WMA files on a CD-R or
CD-RW disc, select “ISO9660 level 1, 2, or
JOLIET or Romeo” as the software format.
Normal playback may not be possible if
recorded in other formats.
● ISR memory
1. Select the station you wish to store in ISR
memory.
2. Press and hold the [ISR] button (2 sec.).
● Recalling a station with ISR
2. The folder name and file name can be
displayed as the title during MP3/WMA play.
However titles must be within 64 single byte
alphabetical letters and numbers (including
extension).
While in any mode, press the [ISR] button to
turn on the radio function and tune the selected
station. “ISR” appears on the display. Press the
[ISR] button again to return to the previous
mode.
3. Do not affix a name to a file inside a folder
with the same name.
CZ109
11
● Number of files or folders
1. Up to 256 files can be recognized per folder.
Up to 578 files can be played.
Loading a CD
1. Insert a CD into the centre of the CD SLOT
with label facing up. “LOADING” appears in
the display, the CD enters the slot, and play
begins.
2. Tracks are played in the order they were
recorded onto the disc. (Tracks may not
always be played in the order displayed on
the PC.)
Notes:
• If the CD does not enter easily, another CD may
be in the unit, or the unit may require service.
3. Some noise may occur depending on the
type of encoder software used for recording.
• Discs without the
or
mark and CD-
ROMs are not supported.
• Some CD-R/CD-RW discs may not be usable.
Disc-In-Play function
This function automatically turns on unit power
and begins disc play if a disc is inserted when
the car’s ignition key is turned to the ON or ACC
position.
Pausing play
1. Press the [
] button to pause play.
“PAUSE” appears in the display.
CAUTION
• Do not insert hands, fingers, or other
foreign objects into the disc insertion slot.
2. To resume CD play, press the [
again.
] button
• Do not insert discs with adhesives such as
cellophane tape or rental CD labels
attached, or discs with marks left from
removal of such adhesives, since the disc
may become stuck and damage the unit.
Displaying CD titles
This unit can display title data for CD-text/MP3/
WMA discs.
1. Each time the [DISP] button is pressed, the
title display will change.
● CD-TEXT discs
Track ➜ Disc ➜ Artist ➜ Track ...
Ejecting a CD
1. Press the [Q] button to eject the CD. Take it
out from the ejected position. “EJECT”
appears in the display.
● MP3/WMA discs
Track ➜ Folder ➜ Title ➜ Album ➜ Artist ➜
Track ...
Notes:
Notes:
• If you force a CD in before auto reloading, you
may damage the CD.
• If a CD (12 cm) is left ejected for 15 seconds, it
will be automatically reloaded (auto reload).
• If the CD playing is not a CD-text disc or no user
title has been input, “NO TITLE” appears in the
display.
• If an MP3/WMA disc has no Tag input, “NO
TITLE” appears in the display.
• This unit supports MP3 ID3 Tags V2.3 / 2.2 / 1.1 /
1.0.
Listening to a disc already loaded in
the unit
Press the [SRC] button to select CD/MP3/WMA
• Tag display gives priority to V2.3 / 2.2.
mode.
• For WMA album Tags, the information written into
the extension header is displayed.
• ISO8859-1, ASCII, S-JIS characters can be
displayed in Tags.
UNKNOW characters can be turned into
ISO8859-1 characters.
When the unit enters this mode, playback starts
automatically.
If no disc is loaded, “NO DISC” appears in the
title display.
• Titles up to 32 bytes can be displayed in CD/
MP3/WMA mode.
12
CZ109
● Folder repeat play
Repeatedly plays all tracks of the current folder
on an MP3/WMA disc.
Selecting a track
● Track advance
1. Press the [v] button to move to the
1. Press and hold the [RPT] button (1 sec.) for
beginning of the next track.
folder repeat play.
2. Each time the [v] button is pressed, the
track advances to the beginning of the next
track.
● Random play
This function plays all tracks recorded on a disc
in random order.
● Track back
1. Press the [RDM] button for random play.
1. Press the [x] button to return to the
beginning of the current track.
● Folder random play
This function plays all the tracks of all the folders
recorded on an MP3/WMA disc in random order.
2. Press the [x] button twice to return to the
beginning of the previous track.
1. Press and hold the [RDM] button (1 sec.) for
folder random play.
Fast-forward/fast-reverse
● To cancel play modes
● Fast-forward
1. Press the button previously selected.
1. Press and hold the [v] button (1 sec.).
● Fast-reverse
1. Press and hold the [x] button (1 sec.).
∗ For MP3/WMA discs, some time is required until
to initiate movement between tracks. Also, some
error may occur in the playing time.
∗ The play mode is canceled and the off mode
appears in the display for 2 seconds.
∗ If the error display “– –:– –” appears, these
modes (Scan/Repeat/Random) can be canceled
while still in play mode.
Folder select
Select a folder containing MP3/WMA files and
begins playing the first track in the folder.
1. Press [UP] or [DN].
Press the [UP] button to move to the next
folder. Press the [DN] button to move to the
previous folder.
2. To select a track, press [x] or [v].
Other play modes
● Scan play
This function locates and plays the first 10
seconds of all tracks recorded on a disc.
1. Press the [SCN] button for scan play.
● Folder scan play
This function locates and plays the first 10
seconds of the first tracks of all folders on an
MP3/WMA disc.
1. Press and hold the [SCN] button (1 sec.) for
folder scan play.
● Repeat play
This function plays the current track repeatedly.
1. Press the [RPT] button for repeat play.
CZ109
13
● Turning the screen saver on/off
This unit has a screen saver function in which
various patterns and random characters can be
displayed on the operation status indication
area. This function can be turned on/off. If a
button is pressed while the screen saver is on,
the corresponding operation display is shown
for about 30 seconds, and then the display
returns to the screen saver.
Operations Common to
Each Mode
To change settings
1. Press and hold the [DISP] button (1 sec.)
to switch to the adjustment display.
2. Press [x] or [v] to select the “item
∗ The factory default setting is “ON”.
2-1. Select “SCRN SVR”.
3-1. Turn the [ROTARY] knob to select “ON” or
name” as follows:
“CLOCK” ↔ “SETTINGS” ↔ “SCRN SVR”
↔“SCROLL” ↔ “DIMMER” ↔ “TEL-SP”
↔ “TEL-SW”
“OFF”.
∗ The adjustment item will be displayed for 2
● Setting title scroll method
Set how to scroll in CD-TEXT and MP3/WMA
titles.
∗ The factory default setting is “ON”.
2-1. Select “SCROLL”.
seconds before showing the desired value.
3. Turn the [ROTARY] knob to select the
desired value.
∗ When “ENT” is flashing in the display, press
the [
] button to adjust setting value.
3-1. Turn the [ROTARY] knob to select “ON” or
4. After completing settings, press the [DISP]
“OFF”.
button to return to the previous mode.
• ON: Scroll automatically.
• OFF: Scroll 1 time only.
● Setting the clock
2-1. Select “CLOCK”.
● Setting dimmer control
Dimmer control can be set “ON” or “OFF”.
∗ The factory default setting is “ON”.
2-1. Select “DIMMER”.
3-1. Press the [
] button
3-2. Press [x] or [v] to select the hour or
minute.
3-1. Turn the [ROTARY] knob to select “ON” or
3-3. Turn the [ROTARY] knob to set the time.
“OFF”.
∗ The clock is displayed in 12-hour format.
● Setting car speaker output for cell
phones
When the AUX input jack is used to connect an
AUX BLUETOOTH BB (BLT370) (sold
separately):
∗ The factory default setting is “RIGHT”.
∗ To output the telephone calls, set cell phone
interrupt to “ON”.
3-4. Press the [
memory and return to the previous mode.
Note:
] button to store the time in
• You cannot set the clock when it is displayed
with only the car’s ignition on. If the car’s battery
dies or is removed, or the unit is removed, the
clock will be reset. If another button/operation is
selected while setting the clock, the clock set
mode is canceled.
2-1. Select “TEL-SP”.
3-1. Turn the [ROTARY] knob to select “RIGHT”
● Displaying the settings
You can see the state of current settings at any
operation mode.
or “LEFT”.
• RIGHT: Telephone calls can be heard on
the front right speaker connected to this
unit.
• LEFT: Telephone calls can be heard on
the front left speaker connected to this
unit.
2-1. Select “SETTINGS”.
3-1. Turn the [ROTARY] knob to display the
current settings.
∗ When the setting is selected, the current
state will be displayed after 1 second.
Example:
After 1 second:
14
CZ109
● Cell phone interrupt setting
If you connect this unit and your cell phone with
an optional cable, you can listen to your calls on
your car speakers.
When the AUX input jack is used to connect an
AUX BLUETOOTH BB (BLT370) (sold
separately):
∗ The factory default setting is “OFF”.
2-1. Select “TEL-SW”.
3-1. Turn the [ROTARY] knob to select setting.
When turning the [ROTARY] knob, the
setting changes as follows:
“OFF” ↔ “ON” ↔ “MUTE”
• OFF: This unit continues normal
operation even when the cell phone is
used.
• ON: Telephone calls can be heard from
the speakers connected to the unit.
∗ When listening to calls on your car speakers,
turn the [ROTARY] knob to adjust the
volume.
• MUTE: The sound from this unit is muted
during telephone calls.
Note:
• If connecting a hands-free kit, make sure the
setting is ON to receive telephone audio through
the system.
AUX function
An external input jack (AUX) is provided on the
front panel to allow playback of sound and
music from external devices.
● Selecting AUX IN sensitivity
Make the following settings to adjust sensitivity
when the sound from an external device is
difficult to hear even after adjusting the volume.
∗ The factory default setting is “MID”.
1. Press and hold the [DISP] button (1 sec.).
2. Select “AUX SENS”.
3. Turn the [ROTARY] knob to select “HIGH”,
“MID” or “LOW”.
Note:
• When AUX mode is selected, AUX IN sensitivity
can be set.
CZ109
15
7. TROUBLESHOOTING
Problem
Cause
Fuse is blown.
Measure
Power does not
turn on.
Replace with a fuse of the same amperage. If the fuse
blows again, consult your dealer.
(No sound)
Incorrect wiring.
Consult your dealer.
No sound when
Power antenna lead is short 1. Turn the unit off.
operating the unit circuited, or excessive
with amplifiers or current is required for
2. Remove all wires attached to the power antenna
lead. Check each wire for possible short circuits
using an ohm meter.
power antenna
attached.
remotely powering on the
amplifiers or power antenna.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to the power
antenna lead one by one. If the amplifiers turn off
before all wires are attached, use an external relay
to provide remote power-on voltage (excessive
current required).
Nothing happens Microprocessor malfunction 1. Turn off power, then press the
Reset button
when buttons are due to noise, etc.
pressed.
[RELEASE] button and remove
the DCP.
2. Use a thin rod to hold reset
button depressed (2 sec.).
If the reset button is pressed
when a disc is loaded, please
eject the disc and load it once
again before attempting to play
it.
Display is not
accurate.
DCP or main unit connectors Wipe dirt off with a soft cloth dampened with cleaning
are dirty. alcohol.
No sound
No sound
The speaker protection circuit 1. Turn down sound volume. Function can also be
is operating.
restored by turning power off and on again.
(Speaker volume is reduced automatically when
the speaker protection circuit operates).
2. If the sound is still muted, consult your dealer.
MP3/WMA files are absent
on disc.
Write MP3/WMA files onto disc properly.
Files are not recognized as
MP3/WMA files.
Use properly encoded MP3/WMA files.
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo file
system.
Sound skips or is CD is dirty.
noisy.
Clean the CD with a soft cloth.
CD is heavily scratched/
Replace with a CD without scratches.
warped.
Sound cuts out or MP3/WMA files are not
Use properly encoded MP3/WMA files.
Let dry for about 1 hour with power on.
skips.
encoded properly.
Noise is
generated/noiseis
mixed with sound.
Sound is poor
when power is
first turned on.
Condensation may form on
the internal lens when the car
is parked in a humid place.
Wrong file name File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo file
system.
16
CZ109
8. ERROR DISPLAYS
If an error occurs, one of the following messages is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2
Cause
A CD is caught inside the CD This is a failure of the CD deck mechanism. Consult
deck and is not ejected. your dealer.
Measure
ERROR 3
ERROR 6
A CD cannot be played due Replace with a non-scratched, non-warped disc.
to scratches, etc.
A CD is loaded upside-down Eject the disc and reload properly.
inside the CD deck and does
not play.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your dealer.
CZ109
17
FM Tuner
Frequency Range: 87.9 MHz to 107.9 MHz
General
Power Supply Voltage:
Usable Sensitivity: 9 dBf
14.4 V DC (10.8 to 15.6 V allowable), negative
50dB Quieting Sensitivity: 15 dBf
Alternate Channel Selectivity: 70 dB
Stereo Separation (1 kHz): 35 dB
Frequency Response ( 3 dB): 30 Hz to 15 kHz
AM Tuner
Frequency Range: 530 kHz to 1710 kHz
Usable Sensitivity: 25 μV
CD Player
System: Compact disc digital audio system
Usable Discs: Compact disc
Frequency Response ( 1 dB): 5 Hz to 20 kHz
Dynamic Range (1 kHz): 85 dB
Harmonic Distortion: 0.01%
Audio
Maximum Power Output: 200 W (50 W ✕ 4 ch)
Bass Control Action (100 Hz): +14 dB, –14 dB
Treble Control Action (10 kHz): +14 dB, –14 dB
Line Output Level (CD 1 kHz): 1.8 V
18
CZ109
Clarion Co., Ltd.
PE-3159B
All Rights Reserved. Copyright © 2008: Clarion Co., Ltd.
2008/10
280-8722-00
Printed in China / Imprimé en Chine / Impreso en China
|