PDxx01 RS-232C Control
Specification : Rev.1.0
PDxx01
RS-232C Control Specification
Category
:
:
Plasma Display
1.0
Document Version
Author(s)
Date
:
:
:
Marantz America, Inc.
2006/12/07
49
Number of Page
Marantz America, Inc. 2006
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of copyright.
All specifications might be subject to change without notice.
PDxx01
RS-232C Control Specification
Page: 3 / 49
Document Version [1.0]
5-38. HD Select..................................................................................................................................................... 26
5-39. LANGUAGE Select...................................................................................................................................... 26
5-40. COLOR SYSTEM Select............................................................................................................................. 27
5-41. FREQUENCY Request (SIGNAL INFORMATION)..................................................................................... 27
5-42. Input MODE Request .................................................................................................................................. 29
5-43. VIDEO ADJ. Request .................................................................................................................................. 29
5-44. Audio Select Request.................................................................................................................................. 31
5-45. Failure Mode Request ................................................................................................................................. 32
5-46. MODEL NAME Request.............................................................................................................................. 33
5-47. LOW TONE (50inch only)............................................................................................................................ 34
5-48. COLOR TUNE ............................................................................................................................................. 34
5-49. GAMMA GAIN Data..................................................................................................................................... 35
5-50. Running Sense............................................................................................................................................ 35
5-51. OSM ORBITER ........................................................................................................................................... 36
5-52. Input Skip..................................................................................................................................................... 36
5-53. SERIAL No. Request................................................................................................................................... 36
5-54. S1/S2 SELECT............................................................................................................................................ 37
5-55. SOFT FOCUS.............................................................................................................................................. 37
5-56. BLACK LEVEL SELECT.............................................................................................................................. 37
5-57. MULTI (SPRIT) SCREEN Select................................................................................................................. 38
5-58. SUB PICTURE DETECT SELECT.............................................................................................................. 39
5-59. ZOOM NAVIGATION SELECT.................................................................................................................... 40
5-60. PICTURE FREEZE SELECT....................................................................................................................... 40
5-61. PICTURE FREEZE (Pause) Command ...................................................................................................... 41
5-62. OSM CONTRAST SELECT......................................................................................................................... 41
5-63. CC (Closed caption) SELECT..................................................................................................................... 41
5-64. CC (Closed caption) CONTRAST SELECT ................................................................................................ 42
5-65. PICTURE MEMORY Select......................................................................................................................... 42
5-66. PICTURE MEMORY Set ............................................................................................................................. 43
5-67. PICTURE MEMORY NOTE WRITE Set...................................................................................................... 43
5-68. SET UP LEVEL SELECT............................................................................................................................. 44
5-69. BACK GROUND SELECT........................................................................................................................... 44
5-70. PDP SAVER AUTO Select........................................................................................................................... 45
5-71. Audio HDMI Request................................................................................................................................... 45
5-72. POWER ON MODE (INPUT)....................................................................................................................... 45
5-73. POWER ON MODE (VOLUME).................................................................................................................. 46
5-74. 74. SUB PICTURE RATE set ...................................................................................................................... 46
5-75. MULTI (SPRIT) SCREEN POWER ON MODE SET................................................................................... 47
5-76. REMOTE CODE SETTING ......................................................................................................................... 48
5-77. VOLUME Gain Data REQUEST.................................................................................................................. 48
5-78. UNDER SCAN SETTING ............................................................................................................................ 48
6. Revision history ................................................................................................................................ 49
Company Restricted
PDxx01
RS-232C Control Specification
Page: 4 / 49
Document Version [1.0]
1. Application
These specifications are applicable to plasma monitors and communications control from external equipment.
"Please also support the command of VP series and refer to the manual of the conventional model about
specification."
2. Connections
Connections should be made as described below.
External equipment
plasma monitor
e.g., Personal computer
2-1.Connector on the plasma monitor side: EXTERNAL CONTROL connector.
Type of connector: D-Sub 9-pin male
No. Pin Name
1
2
3
4
5
6
7
8
9
No Connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
2-2.Connector on the external equipment side: Serial port (RS-232C) connector.
See the specifications of the equipment that is to be connected for the type of connector and pin assignment.
2-3.Wiring
Use a crossed (reverse) cable.
Wire the cable so that each pair of data lines crosses between the two devices. These data line pairs are RXD (Receive data)
and TXD (Transmit data), DTR (DTE side ready) and DSR (DCE side ready), and RTS (Ready to send) and CTS (Clear to
send).
2-4.Communication Parameters
(1) Communication system Asynchronous
(2) Interface
RS-232C
9600 bps
8 bits
(3) Baud rate
(4) Data length
(5) Parity
Odd
(6) Stop bit
1 bit
(7) Communication code
Hex
Company Restricted
PDxx01
RS-232C Control Specification
Page: 5 / 49
Document Version [1.0]
3. Communication Format
8bit
8bit 8bit
8bit
8bit
8bit
8bit
8bit
Command 1
Unit ID 1
Unit ID 2
Command 2
Data length
Data
Check sum
3-1.Command1
Command 1, along with command 2, is a number used to distinguish each command.
Bit1, Bit0: 11Bor 10B :Usually, a form
In the case of ACK, when the lower order 4 bits is FH (as in 3FH and 7FH), this indicates that the commands and data of the
supported equipment have been received. When the lower order 4 bits is BH (as in 3BH and 7BH), this indicates that
unsupported commands and data have been received.
3-2.Unit ID1,2 (UA1,UA2)
Unit ID 1 and unit ID 2 are numbers used to identify the equipment that is to be connected.
60H is used for the plasma monitor and 80H is used for external control equipment such as a personal computer.
3-3.Command 2
Command 2, along with command 1, is a number used to distinguish each command.
3-4.Check Sum (CKS), Error Processing, and ACK
1) The check sum described below and RS-232C odd parity are used together for a check of the received data. The check
sum is the lower order 8 bits of one frame of sent or received data comprising the sum total of Command 1, Unit ID 1 and
2, Command 2, Data Length, and Data.
Check Sum Example
DFH
80H
60H
47H
01H
01H
08H
Command1 Unit ID1
Unit ID2
Command2
Data Length
Data
Check Sum
Total 208H
2) Error Processing
• When the communication interval is vacant for more than 4 ms, thereafter a received Command 1 will be recognized. If,
at this time, meaningful data cannot be recognized, that data will not be recognized (as valid data).
• An ACK will not be returned unless the receive data error, the check sum error, and the receive data are all taken in.
Company Restricted
PDxx01
RS-232C Control Specification
Page: 6 / 49
Document Version [1.0]
4. Command Reference List
CMD1
9FH
9FH
DFH
DFH
9FH
9FH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
1FH
DFH
DFH
DFH
DFH
DFH
1FH
1FH
1FH
1FH
1FH
1FH
DFH
DFH
DFH
1FH
DFH
5FH
1FH
DFH
DFH
DFH
DFH
DFH
DFH
CMD2
4EH
4FH
47H
7FH
3EH
3FH
7FH
7FH
7FH
7FH
7FH
0AH
00H
7FH
7FH
7FH
C0H
7FH
7FH
7FH
51H
7FH
7FH
7FH
7FH
7FH
7FH
7FH
1AH
1AH
C6H
C1H
6BH
C8H
54H
70H
8BH
8AH
5BH
5CH
26H
41H
45H
6FH
3FH
17H
0CH
0DH
13H
88H
5FH
61H
15H
89H
65H
8FH
07H
7AH
7BH
LEN
00H
00H
01H
03H
00H
00H
03H
03H
03H
03H
03H
01H
01H
04H
04H
04H
01H
03H
03H
03H
01H
03H
03H
03H
03H
03H
03H
03H
02H
02H
01H
01H
03H
04H
00H
02H
01H
01H
01H
01H
00H
00H
00H
00H
00H
00H
01H
08H
04H
00H
01H
01H
00H
01H
01H
01H
01H
01H
01H
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
Power ON
Power OFF
Input Switch Change
VOLUME Gain Data
AUDIO Mute ON
AUDIO Mute OFF
CONTRAST Gain Data
BRIGHT Gain Data
SHARPNESS Gain Data
Color Gain Data
TINT Gain Data
PICTURE MODE Select
COLOR TEMP SELECT
RED Gain Data
GREEN Gain Data
BLUE Gain Data
NR MODE Set
BASS Gain Data
TREBLE Gain Data
BALANCE Gain Data
SCREEN MODE Select
V.POSITION Gain Data
H.POSITION Gain Data
V-HEIGHT Gain Data
H-WIDTH Gain Data
AUTO PICTURE Select
PHASE Gain Data (FINE PICTURE Set)
CLOCK Gain Data (PICTURE ADJUST Set)
OSM ADJ. position Data
POWER MGT Select
GRAY LEVEL Set
CINEMA MODE Set
LONG LIFE Set (PDP SAVER Set)
SCREEN WIPER Set
ALL RESET
Audio Select Set
RGB Select
HD Select
LANGUAGE Select
COLOR SYSTEM Select
FREQUENCY Request
Input MODE Request
VIDEO ADJ Request
Audio Select Request
Failure Mode Request
MODEL NAME Request
LOW TONE
COLOR TUNE
GAMMA Gain Data
Running Sense
OSM OBITER
Input Skip
SERIAL No. Request
S1/S2 SELECT
SOFT FOCUS
BLACK LEVEL (DIGITAL SIGNAL LEVEL)
MULTI(SPRIT) SCREEN Select
SUB.P DETECT
ZOOM NAV
Company Restricted
PDxx01
RS-232C Control Specification
Page: 7 / 49
Document Version [1.0]
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
PICTURE FREEZE
PAUSE COMMAND
OSM CONTRAST
CLOSED CAPTION
CAPTION CONTRAST
PICTURE MEMORY Select
PICTURE MEMORY Set
PICTURE MEMORY NOTE WRITE
SET UP LEVEL
BACK GROUND
PDP SAVER AUTO select
Audio HDMI Request
POWER ON MODE (INPUT)
POWER ON MODE (VOLUME)
SUB PICTURE RATE set
MULTI (SPRIT) SCREEN POWER ON MODE SET
REMOTE ID CODE SETTING
VOLUME Gain Request
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
DFH
1FH
DFH
DFH
DFH
DFH
DFH
1FH
DFH
7CH
7DH
37H
3CH
3DH
38H
25H
2DH
35H
36H
2CH
3AH
63H
0FH
DAH
33H
2BH
0EH
22H
01H
01H
01H
01H
01H
01H
02H
0CH
01H
01H
01H
00H
04H
01H
02H
04H
01H
00H
01H
UNDER SCAN SETTING
Company Restricted
PDxx01
RS-232C Control Specification
Page: 8 / 49
Document Version [1.0]
5. Command
5-1.Power ON
Function
The external control equipment switches on the power of the plasma monitor.
Transmission Data
9FH 80H 60H 4EH 00H CKS
ACK
The plasma monitor returns the following ACK when the power is switched on.
3FH 60H 80H 4EH 00H CKS
NOTE: Do not set the Power ON or Power OFF command continuously.
5-2.Power OFF
Function
The external control equipment switches off the power of the plasma monitor.
Transmission Data
9FH 80H 60H 4FH 00H CKS
ACK
The plasma monitor returns the following ACK when the power is switched off.
3FH 60H 80H 4FH 00H CKS
NOTE: Do not set the Power ON or Power OFF command continuously.
5-3.Input Switch Change
Function
The external control equipment switches the input of the plasma monitor.
Transmission Data
DFH 80H 60H 47H 01H DATA00 CKS
DATA00 : Input Select
01H : Video1
02H : Video2
05H : DVD/HD1
06H : DVD/HD2
07H : PC/RGB
0EH : DVD/HD3(HDMI)
1AH : DVD/HD4(HDMI)
ACK
The plasma monitor returns the following ACK when the input is switched.
3FH 60H 80H 47H 00H CKS
Company Restricted
PDxx01
RS-232C Control Specification
Page: 9 / 49
Document Version [1.0]
5-4.VOLUME Gain Data
Function
The external control equipment changes the VOLUME gain data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER SOUND Gain Flag
DATA01: VOLUME Gain Flag
DATA02: VOLUME Gain
05H
01H
00H: Step0
:
0AH: Step10 (Default)
:
2AH: Step42
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER SOUND Gain Flag
DATA01: VOLUME Gain Flag
05H
01H
5-5.AUDIO Mute ON
Function
The external control equipment switches on AUDIO Mute of the plasma monitor.
Transmission Data
9FH 80H 60H 3EH 00H CKS
ACK
3FH 60H 80H 3EH 00H CKS
5-6.AUDIO Mute OFF
Function
The external control equipment switches off AUDIO Mute of the plasma monitor.
Transmission Data
9FH 80H 60H 3FH 00H CKS
ACK
3FH 60H 80H 3FH 00H CKS
Company Restricted
PDxx01
RS-232C Control Specification
Page: 10 / 49
Document Version [1.0]
5-7.CONTRAST Gain Data
Function
The external control equipment changes the CONTRAST gain data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: CONTRAST Gain Flag
DATA02: CONTRAST Gain
01H
07H
CCH: -52
:
FFH: -01
00H: 0
01H: +01
:
14H: +20
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
DATA01: CONTRAST Gain Flag
01H
07H
5-8.BRIGHT Gain Data
Function
The external control equipment changes the BRIGHT gain data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: BRIGHT Gain Flag
DATA02: BRIGHT Gain
01H
08H
E0H: -32
:
FFH: -01
00H: 0
01H: +01
:
20H: +32
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
DATA01: BRIGHT Gain Flag
01H
08H
Company Restricted
PDxx01
RS-232C Control Specification
Page: 11 / 49
Document Version [1.0]
5-9.SHARPNESS Gain Data
Function
The external control equipment changes the SHARPNESS gain data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: SHARPNESS Gain Flag
DATA02: SHARPNESS Gain
01H
06H
F0H: -16
:
FFH: -01
00H: 0
01H: +01
:
10H: +16
Only when a RGB signal is connected
DATA02 : SHARPNESS Gain
01H: 1
02H: 2
03H: 3
04H: 4
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
DATA01: SHARPNESS Gain Flag
01H
06H
5-10. COLOR Gain Data
Function
The external control equipment changes the COLOR gain data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: COLOR Gain Flag
DATA02: COLOR Gain
01H
04H
E0H: -32
:
FFH: -01
00H: 0
01H: +01
:
20H: +32
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
DATA01: COLOR Gain Flag
01H
04H
Company Restricted
PDxx01
RS-232C Control Specification
Page: 12 / 49
Document Version [1.0]
5-11. TINT Gain Data
Function
The external control equipment changes the TINT gain data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: TINT Gain Flag
DATA02: TINT Gain
01H
05H
E0H: -32
:
* TINT Gain is from -22 (EAH) to
+22 (16H) only during video.
FFH: -01
00H: 0
01H: +01
:
20H: +32
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
DATA01: TINT Gain Flag
01H
05H
5-12. PICTURE MODE Select
Function
The external control equipment sets the picture mode of the plasma monitor.
Transmission Data
DFH 80H 60H 0AH 01H DATA00 CKS
DATA00: 01H: NORMAL
02H: THEATER1 (It cannot choose in the still picture input of a personal computer.)
03H: THEATER2 (It cannot choose in the still picture input of a personal computer.)
04H: Default
05H: Bright
ACK
7FH 60H 80H 0AH 01H DATA00 CKS
DATA00: 01H: NORMAL
02H: THEATER1
03H: THEATER2
04H: Default
05H: Bright
Company Restricted
PDxx01
RS-232C Control Specification
Page: 13 / 49
Document Version [1.0]
5-13. COLOR TEMP SELECT
Function
The external control equipment changes the COLOR TEMP of the plasma monitor.
Transmission Data
DFH 80H 60H 00H 01H DATA00 CKS
DATA00:
00H: low
01H: middle
02H: high
03H: middle low
ACK
7FH 60H 80H 00H 01H DATA00 CKS
DATA00:
00H: low
01H: middle
02H: high
03H: middle low
5-14. RED Gain Data
Function
The external control equipment changes the RED Gain Data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 04H DATA00 to DATA03 CKS
DATA00: USER PICTURE Gain Flag
DATA01: RED Gain Flag
DATA02: RED Gain 1(Bias)
01H
01H
D8H : -40
:
FFH : -01
00H : 0
01H : +01
:
1EH : +30
D8H : -40
:
DATA03: RED Gain 2(Drive)
FFH : -01
00H : 0
01H : +01
:
1EH : +30
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
DATA01: RED Gain Flag
01H
01H
Company Restricted
PDxx01
RS-232C Control Specification
Page: 14 / 49
Document Version [1.0]
5-15. GREEN Gain Data
Function
The external control equipment changes the GREEN Gain Data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 04H DATA00 to DATA03 CKS
DATA00: USER PICTURE Gain Flag
DATA01: GREEN Gain Flag
01H
02H
DATA02: GREEN Gain1 (Bias)
D8H: -40
:
FFH: -01
00H: 0
01H: +01
:
1EH: +30
D8H : -40
:
DATA03: GREEN Gain2(Drive)
FFH: -01
00H: 0
01H: +01
:
1EH: +30
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
DATA01: GREEN Gain Flag
01H
02H
5-16. BLUE Gain Data
Function
The external control equipment changes the BLUE Gain Data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 04H DATA00 to DATA03 CKS
DATA00: USER PICTURE Gain Flag
DATA01: BLUE Gain Flag
01H
03H
DATA02: BLUE Gain1 (Bias)
D8H :-40
:
FFH: -01
00H: 0
01H: +01
:
1EH: +30
D8H:-40
:
DATA03: BLUE Gain2 (Drive)
FFH: -01
00H: 0
01H: +01
:
1EH: +30
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
DATA01: BLUE Gain Flag
01H
03H
Company Restricted
PDxx01
RS-232C Control Specification
Page: 15 / 49
Document Version [1.0]
5-17. NR MODE Set
Function
The external control equipment sets the NR (Noise Reduction) mode of the plasma monitor.
Transmission Data
DFH 80H 60H C0H 01H DATA00 CKS
DATA00: 01H: NR OFF
02H: NR-1
03H: NR-2
04H: NR-3
ACK
7FH 60H 80H C0H 01H DATA00 CKS
DATA00: 01H: NR OFF
02H: NR-1
03H: NR-2
04H: NR-3
5-18. BASS Gain Data
Function
The external control equipment changes the BASS gain data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: BASS Gain Flag
DATA02: BASS Gain
05H
03H
F3H: -13
:
FFH : -01
00H: 0
01H: +01
:
0DH : +13
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
DATA01: BASS Gain Flag
05H
03H
Company Restricted
PDxx01
RS-232C Control Specification
Page: 16 / 49
Document Version [1.0]
5-19. TREBLE Gain Data
Function
The external control equipment changes the TREBLE gain data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA0 CKS
DATA00: USER PICTURE Gain Flag
DATA01: TREBLE Gain Flag
DATA02: TREBLE Gain
05H
04H
F3H: -13
:
FFH: -01
00H: 0
01H: +01
:
0DH: +13
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
DATA01: TREBLE Gain Flag
05H
04H
5-20. BALANCE Gain Data
Function
The external control equipment changes the BALANCE gain data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: BALANCE Gain Flag
DATA02: BALANCE Gain
05H
02H
EAH: -22
:
FFH: -01
00H: 0
01H: +01
:
16H: +22
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
05H
DATA01: BALANCE Gain Flag
02H
Company Restricted
PDxx01
RS-232C Control Specification
Page: 17 / 49
Document Version [1.0]
5-21. SCREEN MODE Select
Function
The external control equipment switches the screen mode of the plasma monitor.
Transmission Data
DFH 80H 60H 51H 01H DATA00 CKS
DATA00 02H: STADIUM
03H: ZOOM
04H: NORMAL
05H: ANAMORHIC (FULL)
06H: REAL
08H: UNDERSCAN
09H: 14:9
0AH: 2.35:1
ACK
7FH 60H 80H 51H 01H DATA00 CKS
DATA00 02H: STADIUM
03H: ZOOM
04H: NORMAL
05H: ANAMORHIC(FULL)
06H: REAL
08H: UNDERSCAN
09H: 14:9
0AH: 2.35:1
*If it selects DATA00 “08: UNDERSCAN”, it need to set No.78 UNDERSCAN setting ON.
5-22. V. POSITION Gain Data
Function
The external control equipment changes the V. POSITION gain data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: V.POSITION Gain Flag
DATA02: V.POSITION Gain
03H
01H
C0H: -64
:
FFH: -01
00H: 0
01H: +01
:
40H: +64
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
03H
DATA01: V.POSITION Gain Flag
01H
Company Restricted
PDxx01
RS-232C Control Specification
Page: 18 / 49
Document Version [1.0]
5-23. H. POSITION Gain Data
Function
The external control equipment changes the H. POSITION gain data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: H.POSITION Gain Flag
DATA02: H.POSITION Gain
03H
02H
80H: -128
:
FFH: -01
00H: 0
01H: +01
:
7FH: +127
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
03H
DATA01: H.POSITION Gain Flag
02H
5-24. V. HEIGHT Gain Data
Function
The external control equipment changes the V-HEIGHT gain data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: V-HEIGHT Gain Flag
DATA02: V-HEIGHT Gain
03H
07H
00H: 0
:
40H: +64
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
03H
DATA01: V-HEIGHT Gain Flag
07H
5-25. H. WIDTH Gain Data
Function
The external control equipment changes the H-WIDTH gain data of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: H-WIDTH Gain Flag
DATA02: H-WIDTH Gain
03H
08H
00H: 0
:
40H: +64
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
03H
DATA01: H-WIDTH Gain Flag
08H
Company Restricted
PDxx01
RS-232C Control Specification
Page: 19 / 49
Document Version [1.0]
5-26. AUTO PICTURE Select
Function
The external control equipment switches on or off the AUTO PICTURE of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: AUTO PICTURE Select Flag
DATA02 00H: ON
03H
09H
01H: OFF
ACK
7FH 60H 80H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: AUTO PICTURE Select Flag
DATA02 00H: ON
03H
09H
01H: OFF
5-27. PHASE (FINE PICTURE) Gain Data
Function
The external control equipment changes the PHASE gain data (Phase) of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: PHASE Gain Flag
DATA02: PHASE Gain
03H
03H
00H: 0
:
40H: +64 :
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
03H
DATA01: PHASE Gain Flag
03H
Company Restricted
PDxx01
RS-232C Control Specification
Page: 20 / 49
Document Version [1.0]
5-28. CLOCK (PICTURE ADJUST) Gain Data
Function
The external control equipment changes the CLOCK gain data (ratio of frequency division) of the plasma monitor.
Transmission Data
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS
DATA00: USER PICTURE Gain Flag
DATA01: CLOCK Gain Flag
DATA02: CLOCK Gain
03H
04H
C0H: -64
:
FFH: -01
00H: 0
01H: +01
:
40H: +64
ACK
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS
DATA00: USER PICTURE Gain Flag
03H
DATA01: CLOCK Gain Flag
04H
5-29. OSM ADJ. POSITION Data
Function
The external control equipment sets the position of the OSM menu of the plasma monitor.
Transmission Data
DFH 80H 60H 1AH 02H DATA00 DATA01 CKS
DATA00: OSM ADJ. Gain Flag
DATA01
02H
01H: 1(TOP LEFT)
02H: 2(TOP CENTER)
03H: 3(TOP RIGHT)
04H: 4(BOTTOM LEFT)
05H: 5(BOTTOM CENTER)
06H: 6(BOTTOM RIGHT)
ACK
7FH 60H 80H 1AH 01H DATA00 CKS
DATA00: OSM ADJ. Gain Flag
02H
5-30. POWER MGT Select
Function
The external control equipment switches on or off the POWER MANAGEMENT of the plasma monitor.
Transmission Data
DFH 80H 60H 1AH 02H DATA00 DATA01 CKS
DATA00: POWER MGT Select
DATA01
03H
01H: ON
02H: OFF
ACK
7FH 60H 80H 1AH 02H DATA00 DATA01 CKS
DATA00: POWER MGT Select
DATA01
03H
01H: ON
02H: OFF
Company Restricted
PDxx01
RS-232C Control Specification
Page: 21 / 49
Document Version [1.0]
5-31. GRAY LEVEL Set
Function
The external control equipment sets the GRAY LEVEL of the plasma monitor.
Transmission Data
DFH 80H 60H C6H 01H DATA00 CKS
DATA00: GRAY LEVEL
00H: 0
:
0FH: 15
ACK
7FH 60H 80H C6H 01H DATA00 CKS
DATA00: GRAY LEVEL
00H: 0
:
0FH: 15
5-32. CINEMA MODE Set
Function
The external control equipment switches on or off the CINEMA MODE of the plasma monitor.
Transmission Data
DFH 80H 60H C1H 01H DATA00 CKS
DATA00: CINEMA MODE Set
ACK
01H: ON
02H: OFF
7FH 60H 80H C1H 01H DATA00 CKS
DATA00: CINEMA MODE Set
01H: ON
02H: OFF
5-33. LONG LIFE Set (PDP SAVER Set)
Function
The external control equipment sets the PLE, ORBITER, and INVERSE (inverse of image brightness) or WHITE of the plasma
monitor.
Transmission Data
DFH 80H 60H 6BH 03H DATA00 DATA01 DATA02 CKS
DATA00: PLE
01H: 100% (AUTO)
02H: 75% (LOCK1)
03H: 50% (LOCK2)
04H: 25% (LOCK3)
01H: INVERSE
02H: OFF
DATA01: INVERSE/WHITE
03H: WHITE
DATA02: ORBITER (PICTURE SHIFT)
01H: AUTO1
02H: OFF
03H: AUTO2
ACK
The plasma monitor returns the following ACK when setting the PLE, ORBITER, and INVERSE (inverse of image brightness) or
WHITE:
3FH 60H 80H 6BH 00H CKS
Company Restricted
PDxx01
RS-232C Control Specification
Page: 22 / 49
Document Version [1.0]
5-34. SCREEN WIPER Set
Function
The external control equipment sets the SCREEN WIPER of the plasma monitor.
Transmission Data
DFH 80H 60H C8H 04H DATA00 to DATA03 CKS
DATA00: SCREEN WIPER
00H: No operation
01H: ON
02H: OFF
DATA01:
DATA02:
DATA03:
00H: fixed
FFH: fixed
01H: fixed
ACK
3FH 60H 80H C8H 00H CKS
5-35. ALL RESET
Function
The external control equipment resets the user adjustment of the plasma monitor.
Transmission Data
1FH 80H 60H 54H 00H CKS
ACK
3FH 60H 80H 54H 00H CKS
Company Restricted
PDxx01
RS-232C Control Specification
Page: 23 / 49
Document Version [1.0]
5-36. Audio Select Set
Function
The external control equipment sets combinations of audio and video inputs for the plasma monitor.
Transmission Data
DFH 80H 60H 70H 02H DATA00 DATA01 CKS
DATA00: AUDIO INPUT
DATA01: VISUAL INPUT
01H: AUDIO1
02H: AUDIO2
03H: AUDIO3
04H: DVD/HD3 INPUT1
05H: DVD/HD4 INPUT1
01H: VIDEO1
02H: VIDEO2
05H: DVD/HD1
06H: DVD/HD2
07H: PC/RGB
0EH: DVD/HD 3
1AH: DVD/HD 4
20H: DVD/HD INPUT HDMI
21H: DVD/HD INPUT AUDIO INPUT1-3
ACK
The plasma monitor returns the following ACK when the input is switched.
3FH 60H 80H 70H 00H CKS
* The plasma monitor returns “Not Available” when selecting the video input same as the one set at one of the AUDIO 1 to 3.
Example:
The plasma monitor returns “Not Available” when selecting the VIDEO1 for AUDIO2 or VIDEO2 after VIDEO1 has been set to
AUDIO1.
* When selected 04H or 05H of Data00,it can be selected 20H or 21H of Data01.
Company Restricted
PDxx01
RS-232C Control Specification
Page: 24 / 49
Document Version [1.0]
5-37. RGB Select
Function
The external control equipment sets the RGB SELECT of the plasma monitor.
Transmission Data
DFH 80H 60H 8BH 01H DATA00 CKS
DATA00
01H: AUTO
11H: type1
12H: type2
13H: type3
14H: type4
15H: type5
16H: type6
17H: type7
18H: type8
19H: type9
1AH: type10
ACK
7FH 60H 80H 8BH 01H DATA00 CKS
DATA00
01H: AUTO
11H: type1
12H: type2
13H: type3
14H: type4
15H: type5
16H: type6
17H: type7
18H: type8
19H: type9
1AH: type10
Correspond to Analog RGB.
The type is following as below.
HD_MODE1 :10KHz 以下
HD_MODE2 :14.0~20.9KHz
HD_MODE3 :21.0~26.4KHz
HD_MODE4 :26.5~32.7KHz
HD_MODE5 :32.8~36.6KHz
HD_MODE6 :36.7~38.5KHz
HD_MODE7 :38.6~45.9KHz
HD_MODE8 :46.0~49.0KHz
HD_MODE9 :49.1~55.0KHz
HD_MODE10:55.1~76.9KHz
HD_MODE11:77.0~83.5KHz
HD_MODE12:83.6~115.0KHz
HD_MODE13: other
VD_MODE1:15.00~24.50Hz
VD_MODE2:24.60~27.50Hz
VD_MODE3:27.60~40.00Hz
VD_MODE4:40.01~48.50Hz
VD_MODE5:48.60~55.00Hz
VD_MODE6:55.01~61.76Hz
VD_MODE7:61.77~73.50Hz
VD_MODE8:73.51~79.50Hz
VD_MODE9:79.51~92.50Hz
VD_MODE10:92.51~110.00Hz
VD_MODE11:110.01~131.00Hz
VD_MODE12: other
Company Restricted
PDxx01
RS-232C Control Specification
Page: 25 / 49
Document Version [1.0]
Type1
848x480
@50
Type2
640x480
@50
Type3
Type4
Type5
Type6
Type7
Type8
Type9
Type10
H mode:3
V mode:5
H mode:4
V mode:5
H mode:4
V mode:6
H mode:4
V mode:7
768×576
@50
1920×1080
@50
640×480
@60_1
720×400
@70
852×480
@60
848×480
@60
640×480
@60_2
640×480
@60_3
720×350
@70
1920×1035
@60
(1035I)
1920×1080
@60
H mode:5
V mode:6
800×600
@56
(1080A)
1920×1080
@60
(1080B)
1280x768
@60
H mode:7
V mode:6
1280×768@5
6.2
1280×720
@60
1024*768
@60_2
H mode:8
V mode:6
1024×768
@60_1
1360×765
@60
1376×768
@60
1280×768
@60_1
1280×768
@60_2
Only DVI(PC)
1152x864
@60_1
1024×768
@60
H mode:9
V mode:6
1280*800
@60
1280*854
@60
1152x864
@60_2
H mode：10
1080P
1250P
@50
1920×1080
@50
V mode：5
@50
1080P
@60
1366×768
＠60
1920×1080
@60
H mode：10
1280×1024
@60
1400×1050
@60_1
1920*1200
@60
1920*1200RB
@60
1600×1200
@60
1400x1050
@60_2
1680*1050
@60
V mode：6
H mode：10
1024×768
@70
1024x768
@72
1280x768
@70
1280x768
@72
“1920*1200RB@60” is Reduce blanking signal.
Vmode：7
H mode：10
1024×768
@75
1152×864
V mode：8
Company Restricted
PDxx01
RS-232C Control Specification
Page: 26 / 49
Document Version [1.0]
5-38. HD Select
Function
The external control equipment sets the HD SELECT of the plasma monitor.
Transmission Data
DFH 80H 60H 8AH 01H DATA00 CKS
DATA00
01H: 1035I
02H: 540P (1080A)
03H: 1080I (1080B)
ACK
7FH 60H 80H 8AH 01H DATA00 CKS
DATA00
01H: 1035I
02H: 540P (1080A)
03H: 1080I (1080B)
5-39. LANGUAGE Select
Function
The external control equipment sets the LANGUAGE SELECT of the plasma monitor.
Transmission Data
DFH 80H 60H 5BH 01H DATA00 CKS
DATA00: 01H: ENGLISH
02H: GERMAN
03H: FRENCH
04H: SPANISH
05H: ITALIAN
06H: SWEDISH
0BH: RUSSIAN
0DH: PORTUGUESE
ACK
7FH 60H 80H 5BH 01H DATA00 CKS
DATA00: 01H: ENGLISH
02H: GERMAN
03H: FRENCH
04H: SPANISH
05H: ITALIAN
06H: SWEDISH
0BH: RUSSIAN
0DH: PORTUGUESE
Company Restricted
PDxx01
RS-232C Control Specification
Page: 27 / 49
Document Version [1.0]
5-40. COLOR SYSTEM Select
Function
The external control equipment sets the COLOR SYSTEM of the plasma monitor.
Transmission Data
DFH 80H 60H 5CH 01H DATA00 CKS
DATA00: 01H: 3.58NTSC
02H: 4.43NTSC
03H: PAL
04H: SECAM
0AH: AUTO
0BH: PAL60
0DH: PAL-M
0EH: PAL-N
ACK
7FH 60H 80H 5CH 01H DATA00 CKS
DATA00: 01H: 3.58NTSC
02H: 4.43NTSC
03H: PAL
04H: SECAM
0AH: AUTO
0BH: PAL60
0DH: PAL-M
0EH: PAL-N
5-41. FREQUENCY Request (SIGNAL INFORMATION)
Function
The external control equipment inquires the Horizontal frequency, Vertical frequency, Horizontal sync polarity, Vertical sync polarity,
Mode, and Resolution of the plasma monitor.
Transmission Data
1FH 80H 60H 26H 00H CKS
ACK
7FH 60H 80H 26H 0BH DATA00 to DATA0A CKS
Horizontal frequency
DATA00: Integer part
00H: 0 (No signal: 00H)
:
FFH: 255
DATA01: One decimal place
00H: 0 (No signal: 00H)
:
09H: 9
Vertical frequency
DATA02: Integer part
00H: 0 (No signal: 00H)
:
FFH: 255
DATA03: One decimal place
00H: 0 (No signal: 00H)
:
09H: 9
Company Restricted
PDxx01
RS-232C Control Specification
Page: 28 / 49
Document Version [1.0]
Horizontal sync polarity
DATA04
00H:
-
01H: Positive
02H: Negative
Vertical sync polarity
DATA05 00H:
-
01H: Positive
02H: Negative
MODE
DATA06
00H
: No signal
-
01H to 80H
81H
: RGB signal
Identification number of PC mode
: Video signal
3.58NTSC
4.43NTSC
PAL
82H
:
:
:
:
:
:
:
:
83H
84H
PAL-M
PAL-N
PAL60
SECAM
B/W60
B/W50
480I
85H
86H
87H
88H
89H
A0H : HD/DVD/DTV signal
A1H
A2H
A3H
A4H
A5H
A6H
:
480P
:
:
:
:
:
576I
576P
720P
1035I
1080I
RESOLUTION
DATA07: Dots (Low-order byte)
DATA08: Dots (High-order byte)
DATA09: Lines (Low-order byte)
DATA10: Lines (High-order byte)
00H: 0 (No signal: 00H)
:
FFH 255
00H: 257 (No signal: 00H)
:
FFH
00H: 0 (No signal: 00H)
:
FFH: 255
00H: 257 (No signal: 00H)
:
FFH
Company Restricted
PDxx01
RS-232C Control Specification
Page: 29 / 49
Document Version [1.0]
5-42. Input MODE Request
Function
The display returns the current input information by the external control equipment’s request.
Transmission Data
1FH 80H 60H 41H 00H CKS
ACK
7FH 60H 80H 41H 01H DATA00 CKS
DATA00: Input Select
01H: Video1
02H: Video2
05H: DVD/HD1
06H: DVD/HD2
07H: PC/RGB
0EH: DVD/HD3 (HDMI)
1AH: DVD/HD4 (HDMI)
5-43. VIDEO ADJ. Request
Function
The display returns the video adjustments information by the external control equipment’s request.
Transmission Data
1FH 80H 60H 45H 00H CKS
ACK
7FH 60H 80H 45H 0CH DATA00 to DATA0B CKS
DATA00: RED Gain (Bias)
DATA01: GREEN Gain (Bias)
DATA02: BLUE Gain (Bias)
D8H: -40
:
FFH: -01
00H: 0
01H: +01
:
1EH: +30
D8H: -40
:
FFH: -01
00H: 0
01H: +01
:
1EH: +30
D8H: -40
:
FFH: -01
00H: 0
01H: +01
:
1EH: +30
Company Restricted
PDxx01
RS-232C Control Specification
Page: 30 / 49
Document Version [1.0]
DATA03: COLOR Gain
E0H: -32
:
FFH: -01
00H: 0
01H: +01
:
20H: +32
DATA04: TINT Gain
E0H: -32
:
FFH: -01
00H: 0
01H: +01
:
20H: +32
DATA05: SHARPNESS Gain
F0H: -16
:
FFH: -01
00H: 0
01H: +01
:
10H: +16
DATA06: CONTRAST Gain
CCH: -52
:
FFH: -01
00H: 0
01H: +01
:
14H: +20
DATA07: BRIGHT Gain
E0H: -32
:
FFH: -01
00H: 0
01H: +01
:
20H: +32
DATA08: RED Gain (Drive)
D8H: -40
:
FFH: -01
00H: 0
01H: +01
:
1EH: +30
Company Restricted
PDxx01
RS-232C Control Specification
Page: 31 / 49
Document Version [1.0]
DATA09: GREEN Gain (Drive)
D8H: -40
:
FFH: -01
00H: 0
01H: +01
:
1EH: +30
DATA0A: BLUE Gain (Drive)
D8H: -40
:
FFH: -01
00H: 0
01H: +01
:
1EH: +30
DATA0B: COLOR TEMP SELECT
00H: low
01H: middle
02H: high
03H: middle low
5-44. Audio Select Request
Function
The external control equipment inquires the current combinations of audio and video inputs for the plasma monitor.
Transmission Data
1FH 80H 60H 6FH 00H CKS
ACK
The plasma monitor returns the following ACK:
7FH 60H 80H 6FH 03H DATA00 DATA01 DATA02 CKS
DATA00: AUDIO1
01H-0CH: VISUAL INPUT DATA
DATA01: AUDIO2
01H-0CH: VISUAL INPUT DATA
DATA02: AUDIO3
01H-0CH: VISUAL INPUT DATA
<VISUAL INPUT DATA>
01H: VIDEO1
02H: VIDEO2
05H: DVD/HD1
06H: DVD/HD2
07H: PC/RGB
0EH: DVD/HD3
1AH: DVD/HD4
Company Restricted
PDxx01
RS-232C Control Specification
Page: 32 / 49
Document Version [1.0]
5-45. Failure Mode Request
Function
The external control equipment inquires the detection of failures of the plasma monitor.
Transmission Data
1FH 80H 60H 3FH 00H CKS
ACK
The plasma monitor returns the following ACK:
7FH 60H 80H 3FH 02H DATA00 DATA01 CKS
DATA00: FAILURE MODE 1
Bit 0: PDP MODULE
0: Abnormal
1: Normal
Bit 1: 1: fixed (backup)
Bit 2: TEMPERATURE
0: Abnormal
1: Normal
Bit 3: FAN
0: Abnormal
1: Normal
Bit 4: TEMPERATURE SENSOR
0: Abnormal
1: Normal
Bit 5: 1: fixed (backup)
Bit 6: 1: fixed (backup)
Bit 7: 1: fixed (backup)
DATA01: FAILURE MODE 2
Bit 0-7: 1: fixed (backup)
Note: When 42 inch, “FAN” of DATA00-Bit3 is fixed “1”.
Company Restricted
PDxx01
RS-232C Control Specification
Page: 33 / 49
Document Version [1.0]
5-46. MODEL NAME Request
Function
The external control equipment inquires the product code of the plasma monitor.
Transmission Data
1FH 80H 60H 17H 00H CKS
ACK
The plasma monitor returns the following ACK:
7FH 60H 80H 17H 0CH DATA00 to DATA11 CKS
DATA00: 1st character of the product code
DATA01: 2nd character of the product code
:
DATA11: 12th character of the product code
Received data
00H-09H : 0-9
80H
81H
82H
83H
84H
85H
86H
87H
96H
: - (Hyphen)
: +
:
: /
: (
: )
: .
: ‘
:
Blank
A
B
C
D
E
F
G
H
I
J
10H-29H
: A-Z
Corresponding
character
Received data (H) 10 11 12 13 14 15 16 17 18 19
Corresponding
character
K
L
M
N
O
P
Q
R
S
T
Received data (H) 1A 1B 1C 1D 1E 1F 20 21 22 23
Corresponding
character
U
V
W
X
Y
Z
Received data (H) 24 25 26 27 28 29
If there are fewer than 12 characters in the product code, product code would be padded right with blanks.
Example: If the product code of your plasma monitor is “PX-50XR5A”, the returned codes would be as follows.
DATA00:1FH, DATA01:27H, DATA02:80H, DATA03:05H, DATA04:00H, DATA05:27H, DATA06:21H, DATA07:05H,
DATA08:10H, DATA09:96H, DATA10:96H, DATA11:96H
Company Restricted
PDxx01
RS-232C Control Specification
Page: 34 / 49
Document Version [1.0]
5-47. LOW TONE (50inch only)
Function
The external control equipment sets the Low toned of the plasma monitor.
Transmission Data
DFH 80H 60H 0CH 01H DATA00 CKS
DATA00:
ACK
01H: Mode1
02H: Mode2
7FH 60H 80H 0CH 01H DATA00 CKS
DATA00:
01H: Mode1
02H: Mode2
5-48. COLOR TUNE
Function
External control equipment can adjust RGB each color which a plasma monitor wants to emphasize.
Transmission Data
DFH 80H 60H 0DH 07H DATA00 to DATA06 CKS
DATA00: RED
00H: -32
:
20H: 0
:
40H: +32
DATA01: GREEN
DATA02: BLUE
00H: -32
:
20H: 0
:
40H: +32
00H: -32
:
20H: 0
:
40H: +32
DATA03: YELLOW
DATA04: MAZENTA
DATA05: CYAN
00H: -32
:
20H: 0
:
40H: +32
00H: -32
:
20H: 0
:
40H: +32
00H: -32
:
20H: 0
:
40H: +32
Company Restricted
PDxx01
RS-232C Control Specification
Page: 35 / 49
Document Version [1.0]
DATA06: RESET
00H: OFF
01H: ON
ACK
7FH 60H 80H 0DH 00H CKS
5-49. GAMMA GAIN Data
Function
External control apparatus changes Gamma of a plasma monitor.
Transmission Data
DFH 80H 60H 13H 02H DATA00 DATA01 CKS
DATA00: GAMMA FLAG
DATA01: GAMMA
01H: Gamma change
00H: 1(GAMMA2.1)
01H: 2(GAMMA2.2)
02H: 3(GAMMA2.3)
03H: 4(GAMMA2.4)
ACK
7FH 60H 80H 13H 01H DATA00 CKS
DATA00: GAMMA FLAG
01H: Gamma change
5-50. Running Sense
Function
External control apparatus grasps the power supply state of a plasma monitor.
A plasma monitor is made to recognize connection of PC CONTROL.
Transmission Data
1FH 80H 60H 88H 00H CKS
ACK
7FH 60H 80H 88H 01H DATA CKS
DATA: Bit0: Connect Condition
0: No connection
1: Connected
Bit1 0: Fixed
1:-
Bit2: Power Status
0: POWER ON
1: POWER OFF (STANBY)
Bit3 0: Fixed
Bit4 0: Fixed
Bit5 0: Fixed
Bit6 0: Fixed
Bit7 0: Fixed
Company Restricted
PDxx01
RS-232C Control Specification
Page: 36 / 49
Document Version [1.0]
5-51. OSM ORBITER
Function
In order to decrease printing of a screen by OSM display, whenever it displays OSM, shift operation of the OSM is carried out.
Transmission Data
DFH 80H 60H 5FH 01H DATA00 CKS
DATA00
ACK
01H: ORBITER ON
02H: ORBITER OFF
7FH 60H 80H 5FH 01H DATA00 CKS
DATA00
01H: ORBITER ON
02H: ORBITER OFF
5-52. Input Skip
Function
In a monitor's key "an input change", when there is no signal, it flies and shifts to the following channel.
Transmission Data
DFH 80H 60H 61H 01H DATA00 CKS
DATA00
ACK
01H: ON
02H: OFF
7FH 60H 80H 61H 01H DATA00 CKS
DATA00
01H: ON
02H: OFF
5-53. SERIAL No. Request
Function
External control apparatus read the serial number of the set recorded by EEPROM of a plasma display.
Transmission Data
1FH 80H 60H 15H 00H CKS
ACK
7FH 60H 80H 15H 0CH DATA00 to DATA11 CKS
Even DATA00-DATA11 is set up as follows.
Setting value
00H-09H
96H
:
:
0 - 9
Blank
10H-29H
:
A-Z of Alphabet
Company Restricted
PDxx01
RS-232C Control Specification
Page: 37 / 49
Document Version [1.0]
5-54. S1/S2 SELECT
Function
External control apparatus sets up the S1/S2 detection of a plasma monitor.
Transmission Data
DFH 80H 60H 89H 01H DATA00 CKS
DATA00
01H: AUTO
02H: OFF
ACK
7FH 60H 80H 89H 01H DATA00 CKS
DATA00
01H: AUTO
02H: OFF
5-55. SOFT FOCUS
Function
External control apparatus sets up the Soft Focus of a plasma monitor.
Transmission Data
DFH 80H 60H 65H 01H DATA00 CKS
DATA00 01H: OFF
02H: LEVEL1
03H: LEVEL2
04H: LEVEL3
05H: LEVEL4
ACK
7FH 60H 80H 65H 01H DATA00 CKS
DATA00 01H: OFF
02H: LEVEL1
03H: LEVEL2
04H: LEVEL3
05H: LEVEL4
5-56. BLACK LEVEL SELECT
Function
External control apparatus sets up the black level (digital signal level) of a plasma monitor.
Transmission Data
DFH 80H 60H 8FH 01H DATA00 CKS
DATA00
01H: LOW
02H: HIGH
ACK
7FH 60H 80H 8FH 01H DATA00 CKS
DATA00 01H: LOW
02H: HIGH
Company Restricted
PDxx01
RS-232C Control Specification
Page: 38 / 49
Document Version [1.0]
5-57. MULTI (SPRIT) SCREEN Select
Function
External control apparatus selects a screen mode from alternatives mentioned below, such as single mode, side by side,
picture in picture, etc., of Plasma Monitor.
Transmission Data
DFH 80H 60H 07H 01H DATA00 CKS
DATA00: 00H: Single Screen
01H: Side by Side 1 (Same Size Screen)
02H: Side by Side 2R (Left Screen smaller)
03H: Picture in Picture 1 (sub screen Bottom Left) with size1
04H: Picturein Picture 2(sub screen Bottom Right) with size1
05H: Side by Side 2L (Left Screen Bigger)
06H: Picturein Picture 1(sub screen Bottom Left) with size2
07H: Picturein Picture 2(sub screen Bottom Right) with size2
08H: Picturein Picture 1(sub screen Bottom Left) with size3
09H: Picturein Picture 2(sub screen Bottom Righ) with size3
0AH: Picturein Picture 1(sub screen Bottom Left) with size4
0BH: Picturein Picture 2(sub screen Bottom Right) withsize4
41H: Picturein Picture 3(sub screen Top Right) with size1
42H: Picturein Picture 3(sub screen Top Right) with size2
43H: Picturein Picture 3(sub screen Top Right) with size3
44H: Picturein Picture 3(sub screen Top Right) with size4
45H: Picturein Picture 4(sub screen Top Left) with size1
46H: Picturein Picture 4(sub screen Top Left) with size2
47H: Picturein Picture 4(sub screen Top Left) with size3
48H: Picturein Picture 4(sub screen Top Left) with size4
49H: Side by Side 3 (Same Size Screen vertical expand)
4AH: Side by Side 4R (Left Screen smaller vertical expand)
4BH: Side by Side 4L (Left Screen Bigger vertical expand)
10H: SWAP
A0H: PIP OFF
A1H: PIP ON
In case of Side by Side mode;
20H: Active Left
21H: Active Right
In case of Picture in picture mode;
30H: Active Main
31H: Active Sub
Company Restricted
PDxx01
RS-232C Control Specification
Page: 39 / 49
Document Version [1.0]
ACK
7FH 60H 80H 07H 01H DATA00 CKS
DATA00: 00H: Single Screen
01H: Side by Side 1 (Same Size Screen)
02H: Side by Side 2R (Left Screen smaller)
03H: Picture in Picture 1 (sub screen Bottom Left) with size1
04H: Picturein Picture 2(sub screen Bottom Right) with size1
05H: Side by Side 2L (Left Screen Bigger)
06H: Picturein Picture 1(sub screen Bottom Left) with size2
07H: Picturein Picture 2(sub screen Bottom Right) with size2
08H: Picturein Picture 1(sub screen Bottom Left) with size3
09H: Picturein Picture 2(sub screen Bottom Righ) with size3
0AH: Picturein Picture 1(sub screen Bottom Left) with size4
0BH: Picturein Picture 2(sub screen Bottom Right) withsize4
41H: Picturein Picture 3(sub screen Top Right) with size1
42H: Picturein Picture 3(sub screen Top Right) with size2
43H: Picturein Picture 3(sub screen Top Right) with size3
44H: Picturein Picture 3(sub screen Top Right) with size4
45H: Picturein Picture 4(sub screen Top Left) with size1
46H: Picturein Picture 4(sub screen Top Left) with size2
47H: Picturein Picture 4(sub screen Top Left) with size3
48H: Picturein Picture 4(sub screen Top Left) with size4
49H: Side by Side 3 (Same Size Screen vertical expand)
4AH: Side by Side 4R (Left Screen smaller vertical expand)
4BH: Side by Side 4L (Left Screen Bigger vertical expand)
10H: SWAP
A0H: PIP OFF
A1H: PIP ON
In case of Side by Side mode;
20H: Active Left
21H: Active Right
In case of Picture in picture mode;
30H: Active Main
31H: Active Sub
5-58. SUB PICTURE DETECT SELECT
Function
External control apparatus selects whether to display the sub picture or not, under picture in picture mode, of plasma monitor.
Transmission Data
DFH 80H 60H 7AH 01H DATA00 CKS
DATA00 01H: OFF
02H: AUTO
ACK
7FH 60H 80H 7AH 01H DATA00 CKS
DATA00 01H: OFF
02H: AUTO
Company Restricted
PDxx01
RS-232C Control Specification
Page: 40 / 49
Document Version [1.0]
5-59. ZOOM NAVIGATION SELECT
Function
External control apparatus selects digital zoom display of a plasma monitor, from the alternatives mentioned below;
Transmission Data
DFH 80H 60H 7BH 01H DATA00 CKS
DATA00
01H: OFF (single screen)
02H: Side By Side (Left Screen smaller)
03H: Picture in Picture1 (Sub Screen Bottom Left)
04H: Picture in Picture2 (Sub Screen Bottom Right)
05H: Picture in Picture3 (Sub Screen Top Right)
06H: Picture in Picture4 (Sub Screen Top Left)
ACK
7FH 60H 80H 7BH 01H DATA00 CKS
DATA00
01H: OFF (single screen)
02H: Side By Side2R (Left Screen smaller)
03H: Picture in Picture1 (Sub Screen Bottom Left)
04H: Picture in Picture2 (Sub Screen Bottom Right)
05H: Picture in Picture3 (Sub Screen Top Right)
06H: Picture in Picture4 (Sub Screen Top Left)
5-60. PICTURE FREEZE SELECT
Function
External control apparatus selects the picture freeze function of a plasma monitor.
Transmission Data
DFH 80H 60H 7CH 01H DATA00 CKS
DATA00
01H: OFF (single screen)
02H: Side By Side1 (Same Size Screen)
03H: Picture in Picture1 (Sub Screen Bottom Left)
04H: Picture in Picture2 (Sub Screen Bottom Right)
05H: Picture in Picture3 (Sub Screen Top Right)
06H: Picture in Picture4 (Sub Screen Top Left)
07H: Side by Side 2 (Same Size Screen vertical expand)
ACK
7FH 60H 80H 7CH 01H DATA00 CKS
DATA00
01H: OFF (single screen)
02H: Side By Side1 (Same Size Screen)
03H: Picture in Picture1 (Sub Screen Bottom Left)
04H: Picture in Picture2 (Sub Screen Bottom Right)
05H: Picture in Picture3 (Sub Screen Top Right)
06H: Picture in Picture4 (Sub Screen Top Left)
07H: Side by Side2 (Same Size Screen vertical expand)
Company Restricted
PDxx01
RS-232C Control Specification
Page: 41 / 49
Document Version [1.0]
5-61. PICTURE FREEZE (Pause) Command
Function
External control apparatus sets picture freeze or remove picture freeze of a plasma monitor.
Transmission Data
DFH 80H 60H 7DH 01H DATA00 CKS
DATA00
01H: FREEZE
02H: FREEZE OFF
ACK
7FH 60H 80H 7DH 01H DATA00 CKS
DATA00
01H: FREEZE
02H: FREEZE OFF
5-62. OSM CONTRAST SELECT
Function
External control apparatus selects the OSM contrast function of a plasma monitor.
Transmission Data
DFH 80H 60H 37H 01H DATA00 CKS
DATA00
01H: NORMAL
02H: LOW
ACK
7FH 60H 80H 37H 01H DATA00 CKS
DATA00
01H: NORMAL
02H: LOW
5-63. CC (Closed caption) SELECT
Function
External control apparatus selects the Closed Caption function of a plasma monitor.
Transmission Data
DFH 80H 60H 3CH 01H DATA00 CKS
DATA00
00H: OFF
01H: CC1 (closed caption1)
02H: CC2 (closed caption2)
03H: CC3 (closed caption3)
04H: CC4 (closed caption4)
05H: TEXT1
06H: TEXT2
07H: TEXT3
08H: TEXT4
Company Restricted
PDxx01
RS-232C Control Specification
Page: 42 / 49
Document Version [1.0]
ACK
7FH 60H 80H 3CH 01H DATA00 CKS
DATA00
00H: OFF
01H: CC1 (closed caption1)
02H: CC2 (closed caption2)
03H: CC3 (closed caption3)
04H: CC4 (closed caption4)
05H: TEXT1
06H: TEXT2
07H: TEXT3
08H: TEXT4
5-64. CC (Closed caption) CONTRAST SELECT
Function
External control apparatus selects the Closed Caption Contrast function of a plasma monitor.
Transmission Data
DFH 80H 60H 3DH 01H DATA00 CKS
DATA00
01H: NORMAL
02H: LOW
ACK
7FH 60H 80H 3DH 01H DATA00 CKS
DATA00
01H: NORMAL
02H: LOW
5-65. PICTURE MEMORY Select
Function
The external control equipment selects the Picture Memory function of a plasma monitor.
Transmission Data
DFH 80H 60H 38H 01H DATA00 CKS
DATA00: MEMORY select
00H: OFF
01H: MEMORY1
02H: MEMORY2
03H: MEMORY3
04H: MEMORY4
05H: MEMORY5
06H: MEMORY6
ACK
The plasma monitor returns the following ACK when the input is switched.
7FH 60H 80H 38H 01H CKS
DATA00:
00H: OFF
01H: MEMORY1
02H: MEMORY2
03H: MEMORY3
04H: MEMORY4
05H: MEMORY5
06H: MEMORY6
Company Restricted
PDxx01
RS-232C Control Specification
Page: 43 / 49
Document Version [1.0]
5-66. PICTURE MEMORY Set
Function
The external control equipment ser and reset the Picture Memory function of a plasma monitor.
Transmission Data
DFH 80H 60H 25H 02H DATA00 DATA01 CKS
DATA00:
01H: SET
02H: RESET
DATA01: MEMORY select
00H: OFF
01H: MEMORY1
02H: MEMORY2
03H: MEMORY3
04H: MEMORY4
05H: MEMORY5
06H: MEMORY6
ACK
The plasma monitor returns the following ACK when the input is switched.
7FH 60H 80H 25H 01H CKS
DATA00:
01H: SET
02H: RESET
NOTE: When “PICTURE MEMORY” selects “OFF”, this command is no support.
5-67. PICTURE MEMORY NOTE WRITE Set
Function
External control apparatus writes to NOTE of PICTURE MEMORY of a plasma display.
Transmission Data
DFH 80H 60H 2DH 0FH DATA00 to DATA14 CKS
Even DATA00-DATA14 is set up as follows.
Setting value
00H-09H : 0 - 9
80H
81H
82H
83H
84H
85H
86H
87H
96H
: - (Hyphen)
: +
:
: /
: (
: )
: .
: ‘
: Blank
10H-29H: A-Z of Alphabet
Company Restricted
PDxx01
RS-232C Control Specification
Page: 44 / 49
Document Version [1.0]
Corresponding
character
A
B
C
D
E
F
G
H
I
J
Received data (H) 10 11 12 13 14 15 16 17 18 19
Corresponding
character
K
L
M
N
O
P
Q
R
S
T
Received data (H) 1A 1B 1C 1D 1E 1F 20 21 22 23
Corresponding
character
U
V
W
X
Y
Z
Received data (H) 24 25 26 27 28 29
ACK
3FH 60H 80H 2DH 00H CKS
NOTE)
Please select the memory you like to write by “68.PICTURE MEMORY Select” before setting “PICTURE
MEMORY NOTE WRITE”
5-68. SET UP LEVEL SELECT
Function
External control apparatus selects the Set up level function of a plasma monitor.
Transmission Data
DFH 80H 60H 35H 01H DATA00 CKS
DATA00
01H: 0%
02H: 3.75%
03H: 7.5%
ACK
7FH 60H 80H 35H 01H DATA00 CKS
DATA00
01H: 0%
02H: 3.75%
03H: 7.5%
5-69. BACK GROUND SELECT
Function
External control apparatus selects the Back ground function of a plasma monitor.
Transmission Data
DFH 80H 60H 36H 01H DATA00 CKS
DATA00
01H: Black
02H: Gray
ACK
7FH 60H 80H 36H 01H DATA00 CKS
DATA00
01H: Black
02H: Gray
Company Restricted
PDxx01
RS-232C Control Specification
Page: 45 / 49
Document Version [1.0]
5-70. PDP SAVER AUTO Select
Function
External control apparatus selects automatic or manual of the PDP saver function of a plasma monitor.
Transmission Data
DFH 80H 60H 2CH 01H DATA00 CKS
DATA00
01H: MANUAL
02H: AUTO
ACK
7FH 60H 80H 2CH 01H DATA00 CKS
DATA00
01H: MANUAL
02H: AUTO
5-71. Audio HDMI Request
Function
The external control equipment inquires the current combinations of HDMI audio inputs for the plasma monitor.
Transmission Data
1FH 80H 60H 3AH 00H CKS
ACK
The plasma monitor returns the following ACK:
7FH 60H 80H 6FH 02H DATA00 DATA01 CKS
DATA00: DVD/HD3 INPUT
01H: HDMI
02H: AUDIO INPUT1-3
01H: HDMI
DATA01: DVD/HD4 INPUT
02H: AUDIO INPUT1-3
5-72. POWER ON MODE (INPUT)
Function
Power-on modes (input) are set up.
Transmission Data
DFH 80H 60H 63H 04H DATA00 to DATA03 CKS
DATA00: Power ON mode(INPUT)
00H: LAST
01H: Video1
02H: Video2
05H: DVD/HD1
06H: DVD/HD2
07H: PC/RGB
0EH: DVD/HD3 (HDMI)
1AH: DVD/HD4 (HDMI)
01H
DATA01: FIX
DATA02: FIX
DATA03: FIX
00H
00H
ACK
7FH 60H 80H 63H 00H CKS
Company Restricted
PDxx01
RS-232C Control Specification
Page: 46 / 49
Document Version [1.0]
5-73. POWER ON MODE (VOLUME)
Function
Power-on modes (Volume) are set up.
Transmission Data
DFH 80H 60H 0FH 01H DATA00 CKS
DATA00: Power ON mode (VOLUME)
A0H: LAST
00H: volume0
:
2A H: volume42
ACK
7FH 60H 80H 0FH 00H CKS
5-74. 74. SUB PICTURE RATE set
Function
Sub screen rate of PIP are set up.
Transmission Data
DFH 80H 60H DAH 02H DATA00 DATA01 CKS
DATA00: Sub screen rate Gain flag
DATA01: Sub screen rate Gain
01H
00H: 20%
01H: 30%
02H: 40%
03H: 50%
04H: 60%
05H: 70%
06H: 80%
07H: 90%
08H: 100%
00H: NORMAL
01H: FADE
DATA02: FADE
ACK
7FH 60H 80H DAH 01H DATA00 CKS
DATA00: Sub screen rate Gain flag
01H
Company Restricted
PDxx01
RS-232C Control Specification
Page: 47 / 49
Document Version [1.0]
5-75. MULTI (SPRIT) SCREEN POWER ON MODE SET
Function
Power-on modes (Input) for sprit screen are set up.
Transmission Data
DFH 80H 60H 33H 04H DATA00 to DATA03 CKS
DATA00 POWER ON MODE 01H: LAST
02H: MULTI
DATA01 MULTI MODE
01H: Side By Side1 (Same Size Screen)
02H: Side By Side2 (Left Screen Smaller)
03H: Side By Side2 (Left ScreenBigger)
04H: Picture in Picture1 (Sub screen bottom left)
05H: Picture in Picture2 (Sub screen bottom right)
06H: Picture in Picture3 (Sub screen top right)
07H: Picture in Picture4 (Sub screen top left)
DATA02 INPUT1 (Left or main)
01H: Video1
02H: Video2
05H: DVD/HD1
06H: DVD/HD2
07H: PC/RGB
0EH: DVD/HD3
1AH: DVD/HD4
DATA03 INPUT2 (Right or Sub)
01H: Video1
01H: Video1
02H: Video2
05H: DVD/HD1
06H: DVD/HD2
07H: PC/RGB
0EH: DVD/HD3
1AH: DVD/HD4
ACK
7FH 0H 80H 33H 00H CKS
Company Restricted
PDxx01
RS-232C Control Specification
Page: 48 / 49
Document Version [1.0]
5-76. REMOTE CODE SETTING
Function
Remotecontroler codes are set.
Transmission Data
DFH 80H 60H 2BH 01H DATA00 CKS
DATA00
00H: ALL
01H: CODE1
02H: CODE2
03H: CODE3
04H: CODE4
ACK
7FH 60H 80H 2BH 01H DATA00 CKS
DATA00
00H: ALL
01H: CODE1
02H: CODE2
03H: CODE3
04H: CODE4
5-77. VOLUME Gain Data REQUEST
Function
The external control equipment inquires the volume gain for Plasma diaplay.
Transmission Data
1FH 80H 60H 0EH 00H CKS
ACK
DFH 60H 80H 0EH 01H DATA00 CKS
DATA00: VOLUME Gain
: 00H~2AH
(00H: 0､0FH:15､10H:16､1FH､31･･･2AH:42)
: FFH: MUTE
5-78. UNDER SCAN SETTING
Function
Under scan are set up.
Transmission Data
DFH 80H 60H 22H 01H DATA00 CKS
DATA00:
00H
OFF
01H
ON
ACK
7FH 60H 80H 22H 01H DATA00 CKS
DATA00:
00H
OFF
01H
ON
Company Restricted
PDxx01
RS-232C Control Specification
Page: 49 / 49
Document Version [1.0]
6. Revision history
Rev.
Date
Owner
Change description
1.0 12/06/06 Marantz America, Inc.
Issued Revision1.0
Company Restricted
|