800 SERIES
LINK ELECTRONICS, INC.
HD SD SDI SWITCHER WITH ANALOG AUDIO FOLLOW
MODEL AVS-816/HDA
MADE IN THE USA
FEATURES
FEATURES
GPI Control
Two Video Outputs
RS-232/RS-422
16 Video Inputs
16 Audio Inputs
Vertical Interval
HD SD SDI Video
Analog Audio
One Rack Unit Cabinet
One Stereo Audio Output
Audio & Video Break-away
Controls Up to 32 Switchers
Individual I/O Audio Connection
Windows™ Based Control Software
Computer Control Panel
Includes 816 OP/B
Includes 816 OP/HD
The AVS-815/HDA is an HD SD SDI video
switcher with Analog audio follow. This unit is a
wide band-width video/audio vertical interval
switcher designed for the video professional in
mind. It features compact modular design which
allows it to handle HD SD SDI video and analog
audio. The unit has sixteen channels of HD SD
video and stereo audio. Digital and analog
switching modules for both video and audio may
be mixed in any combination for complete system
flexibility. The inputs are non-looping and offer
outstanding return loss performance. For HD SD
digital applications, an optional analog monitoring
output is available for analog audio.
The analog audio I/O features full transformer
isolation to eliminate the possibility of ground loop
interference. Switching is accomplished during the
vertical Interval by using the vertical sync derived
from the video at the output stage. In a similar
fashion, digital audio switching takes place during
the audio sample preamble. Up to 32 switchers
can be controlled by the computer software.
The AVS-815/HDA may be controlled by a serial
data feed of either RS-232 or RS-422/485
interfacestandards, selectablebyasimpleinternal
DIP switch. A remote control panel is also
available which utilizes the common RJ-11
modularconnectoralongwiththeRS-485interface
standard. For automated system applications, an
optional GPI interface is available.
Audio and video break-away are selected by a
single switch on the front panel. Dual LED’s on the
source selection and follow switch indicate follow
or break-away. The AVS-815/HDA allows the user
to efficiently and economically route or delegate
multiple video and audio signals.
The serial communication protocol is compatible
with existing Link video and audio switchers and
remote control panels. For integration into existing
systems, the AVS-816/HDA can be preset to
respond to that instruction set as well.
The analog audio inputs use standard 3-pin Weco
connectors. The Weco 3-pin connectors are fast
disconnect for ease of set-up.
LINK ELECTRONICS, INC.
2137 Rust Ave.
Cape Girardeau, MO 63703
Phone: 573 334 4433
FAX: 573 334 9255
PROFESSIONAL SERIES--
stand-alone system products--by LINK
|