LD Series LED Exit Sign LD
Page 1 of 1
AC Only or Emergency Operation Die-Cast Aluminum Housing
The LD Series is ideal for locations that require an attractive, reliable and economical exit sign. In addition, all electronics are contained within the exit frame
for low profile mounting.
Side View
2.38”
(6.0 cm)
Front View
13.25”
(33.7 cm)
Standard Canopy
4.63”
(11.8 cm)
4.75”
(12.1 cm)
8.13”
(20.7 cm)
.75”
(1.9 cm)
Complete Fixture consists of base exit sign. Select options and accessories below.
How to Specify:
LD
SERIES
BATTERY
STENCIL
FACES
LETTER
COLOR
STENCIL FACE/
HOUSING COLOR
LD = Die Cast Aluminum
LED Exit
N = Nickel Cadmium
A = AC Only
1 = Single
2 = Double
R = Red
G = Green
A = Natural Brushed Aluminum Face w/ Black Housing
B = Black Stencil Face w/ Black Housing
W = White Stencil Face w/ White Housing
N = Natural Brushed Aluminum Face w/ Natural Brushed Aluminum Housing
WA = Natural Brushed Aluminum Face w/ White Housing
Features
Options
1. Illumination: Illumination is accomplished with long lasting, high output
Light Emitting Diodes (LEDs). LEDs and support electronics have an expected
life of 25 years.
SD = Self-Diagnostics
1
BZ = DC Buzzer (Emergency operation only)
BF = Buzzer/Flasher (Emergency operation only)
1
2. Housing: Constructed of die-cast aluminum with NFPA-type field selectable
chevrons. Housing and stencil face castings are available with durable epoxy-
based powder coat paint finishes. A brushed aluminum stencil face is also
available. Universal knockouts located on backplate allow for wall mounting
directly to standard junction boxes. A mounting canopy is provided for top/
side mount applications.
DL = UL Damp Location Listing
ST = Special Input Transformer (Specify voltage & frequency)
2
FA = 24 VDC Fire Alarm Interface (reg. constant DC voltage)
1
FL = Flasher (Emergency operation only)
2CKT1 = 120 VAC Two Circuit
2CKT2 = 277 VAC Two Circuit
3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-
state circuitry. Charging system is complete with low voltage disconnect, AC
lockout, brownout protection, AC indicator lamp and test switch.
4. Battery: Maintenance free, sealed nickel cadmium battery has an estimated
service life of 5 years, and an operating temperature range of 20°F (-7°C) to
95°F (35°C).
DC6 = 6 VDC Remote Emergency Power
DC12 = 12 VDC Remote Emergency Power
TP = Tamperproof Screws (Requires TPTOOL)
VRS = Vandal Resistant Lens
LC = Low Level Matching Die-Cast Remote Exit
LL = Low Level Institutional Frame Surface Mt Remote Exit
LR = Low Level Recessed Die Cast Remote Exit
SW = Special Wording
5. Input Power Requirements:
AC Only
Red:
4.4 W (120 VAC), PF = .83
4.1 W (277 VAC), PF = .81
4.4 W (120 VAC), PF = .83
4.1 W (277 VAC), PF = .81
NOTES: 1) LEDs will flash (and/or generate an audible signal) when device is activated and/or normal utility
has failed.
2) LEDs will flash when device is activated if normal utility is present (AC only version). LEDs will flash when
device is activated without normal utility (emergency only version).
Green:
Multiple option configurations may void UL listing. Consult factory for specifics.
Emergency Operation
Red:
Job Information
Type:
4.4 W (120 VAC), PF = .83
4.1 W (277 VAC), PF = .81
4.4 W (120 VAC), PF = .83
4.1 W (277 VAC), PF = .81
Job Name:
Cat. No.:
Green:
Code Compliance
Lamp(s):
Notes:
UL 924 listed.
Accessories
CXKIT12W(B) = 12” Pendant Kit, White (Black)
WG4 = Wall Mount Exit Wire Guard
PCS1 = Polycarbonate Vandal Shield
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
Lightolier is a Philips group brand
|