Front Roller Option
Assembly Instructions
Use with 15 Series 48" & 72" Overseeder
Manual No. 308-305M
Attach that assembly to your overseeder using 5/8" x 2"
long bolts (#11), 5/8" lock washers (#12) and 5/8" hex
nut (#13).
Before You Start
When you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!
!
IMPORTANT: Before you begin, read these
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.
These optional assembly instructions contain only
information on assembling the attachment to the main
unit. Please read these installation instructions and the
vehicle Operator’s Manual thoroughly before beginning.
Especially read information relating to safety concerns.
Also included in the Operator’s Manual is important
information on operation, adjustment, troubleshooting,
and maintenance for this attachment (some manual
sections do not apply to all accessories).
14801
Hole Locations Typical on Both Ends of Seeder
Figure 1
Use the 1/2" x 2 1/2" x 3 1/2" long u-bolts (#15), 1/2" lock
washers (#16) and 1/2" hex nuts (#17) to attach the
turnbuckle mounts (#14). The turnbuckle (#18) should
then be attached with 5/8" x 2 1/2" long bolts (#19), 5/8"
lock washers (#20) and 5/8" hex nuts (#21).
A separate Parts Manual for replacement parts can be
purchased from your dealer or available free of charge at
handy when placing an order.
Manual Part Numbers:
• Operator’s Manual . . . . . . . . . . . . . . . . . 308-303M
NOTE: Some of the above parts may already be
assembled.
• Parts Manual . . . . . . . . . . . . . . . . . . . . . 308-303P
General Information
These option assembly instructions apply to the Front
Roller Packages listed below:
308-258A
308-259A
OS1548 Front Roller Assembly
OS1572 Front Roller Assembly
Starting on page 3 is a detailed listing of parts included
in these kits. Use this list as a checklist to inventory parts
received.
Assembly Instructions
Installation Instructions
Refer to Figure 1 for front roller mounting hole locations.
Refer to Figure 2:
Attach the floating top link (#1) to the overseeder hitch
using the spacer tube (#2), a 3/4" x 4" long bolt (#3),
3/4" lock washer (#4) and a 3/4" hex nut (#5).
14802
If the front roller arm (#6) and the front roller (#7) are not
assembled, bolt them together with a 1/2" x 1 1/2" long
bolt (#8), 1/2" lock washer (#9) and a 1/2" hex nut (#10).
Front Roller Assembly
Figure 2
© Copyright 2005
Printed
Manual No. 308-305M
11/08/05
1
Land Pride
Assembly Instructions
308-258A 15 Series 48" Overseeder Front Roller Assembly
Your Kit Includes:
Qty.
Part No.
Part Description
1
2
2
1
1
1
2
4
1
4
12
6
1
12
6
1
4
2
308-247H
308-252K
308-253H
308-255H
308-260H
308-339D
802-055C
802-058C
802-068C
802-091C
803-020C
803-021C
803-027C
804-015C
804-022C
804-023C
806-010C
822-094C
FRONT ROLLER WELDMENT OS1548
TURNBUCKLE ASSY 12 3/8-17 7/8
UPPER TURNBUCKLE MOUNT
FRT ROLLER ARM WELDMENT OS1548
FLOATING TOP LINK
FLOATING TOP LINK SPACER TUBE
HHCS 5/8-11X2 GR5
HHCS 5/8-11X2 1/2 GR5
HHCS 3/4-10X4 GR5
HHCS 1/2-13X1 1/2 GR5
NUT HEX 1/2-13 PLT
NUT HEX 5/8-11 PLT
NUT HEX 3/4-10 PLT
WASHER LOCK SPRING 1/2 PLT
WASHER LOCK SPRING 5/8 PLT
WASHER LOCK SPRING 3/4 PLT
U-BOLT 1/2-13 X 2 1/2 X 3 1/2
BEARING PILLOW BLOCK 1 3/8BORE
308-259A 15 Series 72" Overseeder Front Roller Assembly
Your Kit Includes:
Qty.
Part No.
Part Description
1
2
2
1
1
1
2
4
1
4
12
6
1
12
6
1
4
2
308-248H
308-252K
308-253H
308-256H
308-260H
308-339D
802-055C
802-058C
802-068C
802-091C
803-020C
803-021C
803-027C
804-015C
804-022C
804-023C
806-010C
822-094C
FRONT ROLLER WELDMENT OS1572
TURNBUCKLE ASSY 12 3/8-17 7/8
UPPER TURNBUCKLE MOUNT
FRT ROLLER ARM WELDMENT OS1572
FLOATING TOP LINK
FLOATING TOP LINK SPACER TUBE
HHCS 5/8-11X2 GR5
HHCS 5/8-11X2 1/2 GR5
HHCS 3/4-10X4 GR5
HHCS 1/2-13X1 1/2 GR5
NUT HEX 1/2-13 PLT
NUT HEX 5/8-11 PLT
NUT HEX 3/4-10 PLT
WASHER LOCK SPRING 1/2 PLT
WASHER LOCK SPRING 5/8 PLT
WASHER LOCK SPRING 3/4 PLT
U-BOLT 1/2-13 X 2 1/2 X 3 1/2
BEARING PILLOW BLOCK 1 3/8BORE
11/08/05
■
Manual No. 308-305M
3
|