Specifications & Capacities
Rotary Cutters, Single Deck
RCR1860 and RCR1872 Series
RCR1860
60”
RCR1872
72”
Cutting Width
Overall Width
Overall Length
Blade Tip Speed
65"
77"
97”
110”
16,363 fpm
599 lbs.
14,955 fpm
737 lbs.
Machine Weight (with laminated tailwheel,
slip clutch driveline, Front Rubber
Guards and Rear Metal Band)
Driveline
ASAE Category 3 Shear Bolt or 2-plate Slip Clutch
Recommended Tractor PTO HP
PTO Speed
20-50 HP
540 rpm
Gearbox
1:1.93 Speed-Up Beveled Gears
1:1.46 Speed-Up Beveled Gears
Cast Iron Housing 50 HP
Cast Iron Housing 50 HP
Gearbox Lubricant
EP 80-90W oil
Cutting Height
1 1/2” - 13”
1 1/2” to 11 1/2”
Deck Construction
All Welded Deck
Deck Material Thickness
Side Skirt Material Thickness
11 Ga. (.120”)
11 Ga.
10 Ga. (.134”)
10 Ga.
9”
Deck Height
7 1/2”
(Bottom of Deck to Bottom of Skid Shoe)
Skid Construction
Tailwheel Mount Assembly
Tailwheel
Full length welded on
Welded A-arm and Caster Fork with 360 degree swivel
4” x 8” x 15” Laminated Tire with cast iron hub or 4” x 16” Molded Rubber Tire
Category l with Floating Clevis Top Link, Quick Hitch Adaptable
Blade Holder Bar with Stump Jumper Round Pan 10 ga. x 24”
Hitch
Blade Holder
Blades
2 each, 1/2” x 3" Heat Treated Alloy Steel
Free-Swinging High Lift - Low Friction
Blade Bolts
Keyed with harden flat washers & lock nuts.
1” Diameter
Blade Cutting Capacity
Optional Front Guard
Rear Guard
Rubber Belting or Chain Guard
Standard Metal Banding or Optional Rubber Belting or Optional Chain Guard
Designs, specifications, features and information are subject to change without notice.
312-849S
12/18/07
312-849S
70
|