Specifications & Capacities
Rotary Cutters, Folding Deck
RC5020 and RCM5020 Series
RC5020 & RCM5020
Min. PTO Horse Power
Gear Box Horsepower
70
250 HP Splitter
210 HP Center & wing
Gear Box Lubrication
Cutting Capacity
Machine Weight
Gear Lube 80-90W EP
Up To 3" Material
6,528 lbs. Approx.
(With single row chain guards, 6 laminated tires, dual axle, 540 CV main driveline)
Blade Tip Speed @ 540 RPM Center blade: 17,377 FPM
Wing blade: 17,329 FPM
@1000 RPM Center blade: 18,165 FPM
Wing blade:18,317 FPM
Tongue Weight
Hitch Jack
2300 lbs.
Standard hand crank
Pull-Type, Self-Leveling Hitch & Clevis
Hitch Type
Cutting Width
20’-0”
Overall Width
Minimum Transport Width
20’-9 1/2”
8’-9”
Overall Length
19’-3”
Deck Height
10 1/2”
Cutting Height
2” to 14” High with hydraulic cylinder and stroke control spacers
Deck Material Thickness
Side Skirt Thickness
Skid Shoes
3/16”
1/4”
Wing and Weight Box: Reversible & replaceable
Center Deck: 2 - Replaceable
Blades - 6 (2 per Carrier)
Blade Overlap
1/2” x 4” Thru-harden free swinging alloy steel with uplift
6”
Blade Bolt
Keyed with hardened flat washer & lock nut
3/16” Round dish shaped bolt-on stump-jumper with 1” diamond shaped blade bar
Optional 1/2” x 3” fully welded
3/16” Stump Jumper
Deck Ring
Front & Rear Guards
Optional rubber, single chain or double chain
Heavy Duty
Conventional u-joint ASAE Category 5 with 1 3/8”-21 spline
Input Driveline Options
Constant velocity u-joint ASAE Category 5 with 1 3/8”-21 spline or 1 3/4”-20 spline
Heavy Duty
ASAE Cat. 5 with slip-clutch protection
Connecting Drivelines
Tire Options
6” x 21” Laminated tires
or 27” x 7.75” x 15” Used aircraft tires w/wo foam filling
or 15” Rims
Wheel Options
Transport Axle
Hubs
6 or 8 Wheels
Spring-cushioned on center transport axle
Cast iron 5-bolt hubs with tapered roller bearings and with 1 3/4” shafts
Cuts material into smaller pieces
Shredder Blades (optional)
Colors
Standard color: Beige
Optional colors: Green or Red
Designs, specifications, features and information are subject to change without notice.
105
02/03/09
318-474S continue on next page
|