Electric Lift Actuator
For Food Plot Seeder
For Model FPS48 Plot Ranger
Manual No. 322-121M
2. Adjust ratchet jack to lower the FPS48 disc gangs
onto the ground until all pressure is removed from
the clevis pins. Remove ratchet jack from the seeder.
Before You Start
When you see this symbol, the subsequent
3. Attach lower end of linear actuator (#3) to the front
mounting lug (B) with hitch pin (#2). Secure in place
with hair pin clip (#1).
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!
!
4. Attach hand controller (#4) to the linear actuator by
plugging connector (E) into connector (F).
IMPORTANT: Before you begin, read these
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.
Your Land Pride Electric Actuator is exclusively
designed for your Land Pride FPS48 Food Plot Seeder.
Please read these installation instructions and the Food
Plot Seeder Operator’s Manual thoroughly before
beginning. Especially read information relating to safety
concerns. Also included in the Operator’s Manual is
important information on operation, adjustment,
troubleshooting, and maintenance for this attachment
(some manual sections do not apply to all accessories).
A separate Parts Manual for replacement parts can be
purchased from your dealer or available free of charge at
handy when placing an order.
Manual Part Numbers:
• Operator’s Manual . . . . . . . . . . . . . . . . . 322-118M
• Parts Manual . . . . . . . . . . . . . . . . . . . . . 322-118P
General Information
These assembly instructions apply to the following
Electric Actuator Accessories listed below:
322-119A
ELECTRIC LIFT ACTUATOR PACKAGE
Tools required:
• Safety Glasses
• Work Gloves
23907
Assembly Instructions
Linear Actuator Assembly ()
Figure 1-1
A detailed listing of parts for the accessory kit is provided
on page 3. Use the list as a checklist to inventory parts
received. Please contact your local Land Pride dealer for
any missing hardware.
Refer to Figure 1-2 on page 2:
!
CAUTION
Linear Actuator Installation
Refer to Figure 1-1:
Make sure all electrical wiring is supported in such a way that
it will not come in contact with trash, lift mechanism, rotating
discs, pinch points, vehicle rotating components, hot exhaust
components, etc.
1. Park the Food Plot Seeder on a flat level surface.
© Copyright 2005
Printed
4/17/06
1
Land Pride
Listing of Parts
Kit No. 322-119A
ELECTRIC LIFT ACTUATOR PACKAGE
Item
Qty.
Part No.
Part Description
1
2
3
4
5
6
2
2
2
2
1
1
1
322-109H
802-130C
803-019C
805-012C
833-318C
833-402C
322-121M
CYLINDER ADAPTER WELDMENT
HHCS 1/2-13X2 1/2 GR5
NUT LOCK 1/2-13 PLT
PIN CLEVIS 1 X 2 1/8 USABLE LG
ELECT. LINEAR ACTUATOR 8" STRK
WIRING HARNESS W/SWITCH
MANUAL, ELECT. LIFT INSTRUCT.
Not Shown
4/17/06
■
Manual No. 322-121M
3
|