time
tools
Skills - easy
Quad Surveillance SyStem
with 4 ccd indoor/outdoor cameraS*
Under 10 Minutes*
Plug & Play connectors, On
screen set up
Hand Tools
* Installation time may vary based
on application and camera cabling
B. Connecting the DIN Video Cable
Getting Started
Connect the DIN end of the Video Cable to the Quad Processor. Connect the RCA VIdeo cable
to the TV, VCR or Monitor.
The SHS System comes with the following components:
• Quad Processor
• 2 x Weatherproof Color Cameras with Stands
• 2 x Weatherproof Color Day/Night IR Cameras with Stands
• 4 x 60’ DIN Extension Cables
• DIN Video Cable
Night Vision
Cameras
Day Use
Cameras
• Remote Control
QUAD PROCESSOR
Connect the DIN Cable end
to the Video Output port
• Power Adapter
TV / VCR / MONITOR
Connect the Yellow RCA
connector to the TV Video IN
Port (yellow)
Check your package to confirm that you have received the
complete system, including all components shown above.
SHS CABLE
RCA to DIN Cable
A. Connect Cameras
Connectivity Diagram
Before you install the camera, carefully plan where and how you will position the camera, and where you will route the cables
* IR illumination range up to 16 ft. (5M) under ideal conditions. Objects at or beyond this range may be partially or completely obscured,
depending on the camera application. Picture changes from Color to B&W under low light conditions.
* Note that the IR Night Vision Cameras have a black lens cover.
TV / VCR / MONITOR
POWER ADAPTER
4 x CAMERAS
Connect the female end of the supplied 60’
extension’ cable to the camera.
Connect the male end of the supplied 60’
extension cable to an open DIN channel on
the back of the Quad Processor. Continue
connecting additional DIN cameras.
1
2
NOTE: Confirm that the arrows
on the DIN Camera Cable and the
DIN Extension cable are aligned
when connecting the cable. If the
pins in the DIN Cable are bent, the
Camera will NOT function.
4 x 60’ EXTENSION CABLES
NOTE: The arrow on
the DIN Connector
Connector should
be facing up when
connecting it to the
Quad Processor.
QUAD PROCESSOR
DIN CABLE
SHS-4QM SERIES Quick Set-Up Guide R1
|