1. RESET: Reset unit to default settings
MAIN UNIT - SOLAR PANEL
2. °C / °F: Select temperature
The solar panel is an energy saving feature, which is
an environmentally friendly way to provide additional
power to the main unit and prolongs battery life. How-
ever, it cannot replace battery power entirely.
REMOTE SENSOR
Solar First Watch Weather Station
with Indoor / Outdoor Temperature
Model:0KSV1
2
SENSOR DATA TRANSMISSION
To search for a sensor:
1
Press and hold
+ MODE.
4
5
3
The sensor reception icon in the remote sensor
area shows the status:
USER MANUAL
EN
ICON
DESCRIPTION
INTRODUCTION
Main unit is searching for
sensor(s).
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET hole
Thank you for selecting this Weather Station.
NOTE Please keep this manual handy as you use
your new product. It contains practical step-by-step
instructions, as well as technical specifications and
warnings you should know about.
A channel has been found.
5. CHANNEL switch
The sensor cannot be
found.
OVERVIEW
GETTING STARTED
FRONT VIEW
TIP The transmission range may vary depending
on many factors. You may need to experiment with
various locations to get the best results.
IMPORTANT Set up the remote outdoor sensor
first before setting the main unit.
1
REMOTE SENSOR – INSERT BATTERIES
MANUALLY SET CLOCK
To set the clock manually:
1. Press and hold MODE.
The main unit can collect data from up to 3 sensors.
To set up the sensor:
2. Press
or
to change the settings.
1. Open the battery compartment.
2. Insert the battery, matching the polarities.
3. Select a channel then press RESET.
4. Close the battery door.
3. Press MODE to confirm.
2
4. The settings order is: time zone,12/24 hr format,
hour, minute, year, calendar mode (day – month /
month – day), month, day and language.
6
5. Place the sensor within 30 m (98 ft) of the main
unit using the table stand or wall mount.
7
Time zone offset sets the clock +/- 23 hours from the
received clock signal time.
TIP Ideal placements for the sensor would be in
any location on the exterior of the home at a height
of not more than 1.5 m (5 ft) and which can shield it
from direct sunlight or wet conditions for an accurate
reading.
8
3
Select the time zone: (P) Pacific, (E) Eastern, (C)
Central or (M) Mountain.
NOTE The language options are English (E), Ger-
man (D), French (F), Italian (I), Spanish (S) and
Russian (R).
9
4
5
To select display mode:
Press MODE to choose between clock with seconds,
clock with weekday or calendar.
1. Solar panel
2. Remote sensor reception indicator
3. Indoor temperature
TEMPERATURE
To toggle temperature unit:
Press °C / °F.
4. MODE: Change settings / display
5.
/
: Increase / decrease value; activate /
To toggle between each outdoor sensor’s readings:
deactivate clock reception signal;
between outdoor channels (1-3)
:
toggle
Press
OR
repeatedly.
6. Outdoor temperature
7. Time zone
Press and hold + MEM for 2 seconds to initiate auto
toggle of outdoor channels.
1.5 m (5 ft)
To end press
.
8. Clock with weekday
To toggle between current, minimum and maxi-
mum records:
Press MEM repeatedly.
9. MEM: View current, maximum and minimum
temperature
BACK VIEW
To clear the records:
Press and hold MEM.
NOTE
•
•
Press RESET after each battery change or channel
selection.
RESET
Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures
below freezing.
Press RESET to return to the default settings.
PRECAUTIONS
•
•
•
Do not subject the unit to excessive force, shock,
dust, temperature or humidity.
Do not cover the ventilation holes with any items
such as newspapers, curtains etc.
Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free
cloth.
MAIN UNIT – INSERT BATTERIES
•
•
•
•
•
Do not clean the unit with abrasive or corrosive
materials.
Do not tamper with the unit’s internal components.
This invalidates the warranty.
Only use fresh batteries. Do not mix new and old
batteries.
Images shown in this manual may differ from the
actual display.
1. Remove the battery compartment.
1
2
2. Insert the batteries, matching the polarities.
3. Press RESET after each battery change.
MEANING
LOCATION
Clock / alarm
Outdoor temperature
Main unit batteries
low
When disposing of this product, ensure it is
Sensor battery low
RAR802_MANUAL R3.indd
1
1/6/12 11:40:37
|