LG Electronics Blu ray Player BDP S790 User Manual

4-418-507-11(3)  
Hookups and Settings  
Playback  
Blu-ray Disc™ /  
DVD Player  
Internet  
Operating Instructions  
Settings and Adjustments  
Additional Information  
BDP-S790  
 
correctly, you will help prevent potentially  
negative consequences for the environment and  
human health which could otherwise be caused  
by inappropriate waste handling of the battery.  
The recycling of the materials will help to  
conserve natural resources.  
Precautions  
This equipment has been tested and found to  
comply with the limits set out in the EMC  
Directive using a connection cable shorter  
than 3 metres.  
In case of products that for safety, performance or  
data integrity reasons require a permanent  
connection with an incorporated battery, this  
battery should be replaced by qualified service  
staff only.  
To ensure that the battery will be treated properly,  
hand over the product at end-of-life to the  
applicable collection point for the recycling of  
electrical and electronic equipment.  
On placement  
• Place the player in a location with adequate  
ventilation to prevent heat build-up in the  
player.  
• Do not place the player on a soft surface  
such as a rug that might block the ventilation  
holes.  
• Do not install this player in a confined space,  
such as a bookshelf or similar unit.  
• Do not place the player in a location near  
heat sources, or in a place subject to direct  
sunlight, excessive dust, or mechanical  
shock.  
• Do not place the player outdoors, in  
vehicles, on ships, or on other vessels.  
• If the player is brought directly from a cold  
to a warm location, or is placed in a very  
damp room, moisture may condense on the  
lenses inside the player. Should this occur,  
the player may not operate properly. In this  
case, remove the disc and leave the player  
turned on for about half an hour until the  
moisture evaporates.  
• Do not install the player in an inclined  
position. It is designed to be operated in a  
horizontal position only.  
• Do not place metal objects in front of the  
front panel. It may limit reception of radio  
waves.  
For all other batteries, please view the section on  
how to remove the battery from the product  
safely. Hand the battery over to the applicable  
collection point for the recycling of waste  
batteries.  
For more detailed information about recycling of  
this product or battery, please contact your local  
Civic Office, your household waste disposal  
service or the shop where you purchased the  
product.  
Notice for customers in the United  
Kingdom and Republic of Ireland  
The following information is only applicable to  
equipment sold in countries applying EU  
directives.  
The manufacturer of this product is Sony  
Corporation, 1-7-1 Konan Minato-ku Tokyo,  
108-0075 Japan. The Authorized Representative  
for EMC and product safety is Sony Deutschland  
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,  
Germany. For any service or guarantee matters  
please refer to the addresses given in separate  
service or guarantee documents.  
• Do not place the player in a place where  
medical equipment is in use. It may cause a  
malfunction of medical instruments.  
• If you use a pacemaker or other medical  
device, consult your physician or the  
manufacturer of your medical device before  
using the wireless LAN function.  
• This player should be installed and operated  
with a minimum distance of at least 20 cm or  
more between the player and a person’s  
body (excluding extremities: hands, wrists,  
feet and ankles).  
Precautions  
• This unit operates on 220–240V AC, 50/60 Hz.  
Check that the unit’s operating voltage is  
identical with your local power supply.  
• To prevent fire or shock hazard, do not place  
objects filled with liquids, such as vases, on the  
apparatus.  
• Install this unit so that the mains lead can be  
unplugged from the wall socket immediately in  
the event of trouble.  
3
 
   
• Do not place heavy or unstable objects on  
the player.  
• Do not place any objects other than discs on  
the disc tray. Doing so may cause damage to  
the player or the object.  
On cleaning discs, disc/lens cleaners  
Do not use cleaning discs or disc/lens cleaners  
(including wet or spray types). These may  
cause the apparatus to malfunction.  
• Take out any discs when you move the  
player. If you don’t, the disc may be  
damaged.  
• Disconnect the AC power cord (mains lead)  
and all other cables from the player when  
you move the player.  
On replacement of parts  
In the events that this player is repaired,  
repaired parts may be collected for reuse or  
recycling purposes.  
On connecting to the HDMI OUT jack  
Observe the following as improper handling  
may damage the HDMI OUT jack and the  
connector.  
• Carefully align the HDMI OUT jack on the  
rear of the player and the HDMI connector  
by checking their shapes. Make sure the  
connector is not upside down or tilted.  
On power sources  
• The player is not disconnected from the AC  
power source (mains) as long as it is  
connected to the wall outlet, even if the  
player itself has been turned off.  
• Disconnect the player from the wall outlet if  
you are not going to use the player for a long  
time. To disconnect the AC power cord  
(mains lead), grasp the plug itself; never pull  
the cord.  
• Observe following points to prevent the AC  
power cord (mains lead) being damaged. Do  
not use the AC power cord (mains lead) if it  
is damaged, as doing so may result in an  
electric shock or fire.  
– Do not pinch the AC power cord (mains  
lead) between the player and wall, shelf,  
etc.  
• Be sure to disconnect the HDMI cable when  
moving the player.  
– Do not put anything heavy on the AC  
power cord (mains lead) or pull on the AC  
power cord (mains lead) itself.  
On adjusting volume  
• Hold the HDMI connector straight when  
connecting or disconnecting the HDMI  
cable. Do not twist or force the HDMI  
connector into the HDMI OUT jack.  
Do not turn up the volume while listening to a  
section with very low level inputs or no audio  
signals. If you do, your ears and the speakers  
may be damaged when a peak level section is  
played.  
On watching 3D video images  
Some people may experience discomfort  
(such as eye strain, fatigue, or nausea) while  
watching 3D video images. Sony recommends  
that all viewers take regular breaks while  
watching 3D video images. The length and  
frequency of necessary breaks will vary from  
person to person. You must decide what works  
best. If you experience any discomfort, you  
should stop watching the 3D video images  
until the discomfort ends; consult a doctor if  
On cleaning  
Clean the cabinet, panel, and controls with a  
soft cloth. Do not use any type of abrasive pad,  
scouring powder or solvent such as alcohol or  
benzine.  
4
 
you believe necessary. You should also  
review (i) the instruction manual and/or the  
caution message of any other device used  
with, or Blu-ray Disc contents played with this  
product and (ii) our website* for the latest  
information. The vision of young children  
(especially those under six years old) is still  
under development. Consult your doctor (such  
as a pediatrician or eye doctor) before  
allowing young children to watch 3D video  
images.  
Adults should supervise young children to  
ensure they follow the recommendations  
listed above.  
* For customers in European countries  
For customers in Australia/New Zealand  
Cinavia Notice  
This product uses Cinavia technology to limit the  
use of unauthorized copies of some  
commercially-produced film and videos and their  
soundtracks. When a prohibited use of an  
unauthorized copy is detected, a message will be  
displayed and playback or copying will be  
interrupted.  
More information about Cinavia technology is  
provided at the Cinavia Online Consumer  
Information Center at http://www.cinavia.com.  
To request additional information about Cinavia  
by mail, send a postcard with your mailing  
address to: Cinavia Consumer Information  
Center, P.O. Box 86851, San Diego, CA, 92138,  
USA.  
Copyrights and Trademarks  
• “AVCHD” and the “AVCHD 3D/  
Progressive” logo are trademarks of  
Panasonic Corporation and Sony  
Corporation.  
IMPORTANT NOTICE  
Caution: This player is capable of holding  
a still video image or on-screen display  
image on your television screen  
indefinitely. If you leave the still video  
image or on-screen display image  
displayed on your TV for an extended  
period of time you risk permanent damage  
to your television screen. Plasma display  
panel televisions and projection  
• Java is a trademark of Oracle and/or its  
affiliates.  
, “XMB,” and “xross media bar” are  
trademarks of Sony Corporation and Sony  
Computer Entertainment Inc.  
• This product incorporates High-Definition  
Multimedia Interface (HDMI™)  
technology. HDMI, the HDMI logo and  
High-Definition Multimedia Interface are  
trademarks or registered trademarks of  
HDMI Licensing LLC in the United States  
and other countries.  
• “Blu-ray Disc,” “DVD+RW,” “DVD-RW,”  
“DVD+R,” “DVD-R,” “DVD VIDEO,”  
“Super Audio CD,” and “CD” logos are  
trademarks.  
• “BD-LIVE,” “BD-LIVE” logo, and  
“BONUSVIEW” are trademarks of Blu-ray  
Disc Association.  
• “Blu-ray 3D” and “Blu-ray 3D” logo are  
trademarks of Blu-ray Disc Association.  
• “x.v.Colour” and “x.v.Colour” logo are  
trademarks of Sony Corporation.  
• “BRAVIA” is a trademark of Sony  
Corporation.  
televisions are susceptible to this.  
If you have any questions or problems  
concerning your player, please consult your  
nearest Sony dealer.  
Copy Protection  
Please be advised of the advanced content  
protection systems used in both Blu-ray  
Disc™ and DVD media. These systems,  
called AACS (Advanced Access Content  
System) and CSS (Content Scramble System),  
may contain some restrictions on playback,  
analogue output, and other similar features.  
The operation of this product and the  
restrictions placed may vary depending on the  
date of purchase, as the governing board of the  
AACS may adopt or change its restriction  
rules after the time of purchase.  
• “PhotoTV HD” and the “PhotoTV HD” logo  
are trademarks of Sony Corporation.  
5
 
• MPEG Layer-3 audio coding technology  
and patents licensed from Fraunhofer IIS  
and Thomson.  
copyright © 2000-present Gracenote.  
Gracenote Software, copyright © 2000-  
present Gracenote. One or more patents  
owned by Gracenote apply to this product  
and service. See the Gracenote website for a  
nonexhaustive list of applicable Gracenote  
patents. Gracenote, CDDB, MusicID,  
MediaVOCS, the Gracenote logo and  
logotype, and the “Powered by Gracenote”  
logo are either registered trademarks or  
trademarks of Gracenote in the United  
States and/or other countries.  
• This product incorporates proprietary  
technology under license from Verance  
Corporation and is protected by U.S. Patent  
7,369,677 and other U.S. and worldwide  
patents issued and pending as well as  
copyright and trade secret protection for  
certain aspects of such technology. Cinavia  
is a trademark of Verance Corporation.  
Copyright 2004-2010 Verance Corporation.  
All rights reserved by Verance. Reverse  
engineering or disassembly is prohibited.  
• Windows Media is either a registered  
trademark or trademark of Microsoft  
Corporation in the United States and/or  
other countries.  
Opera Browser  
Opera(r) Browser from Opera Software ASA.  
Copyright 1995-2010 Opera Software ASA. All  
rights reserved.  
This product contains technology subject to  
certain intellectual property rights of  
Microsoft. Use or distribution of this  
technology outside of this product is  
prohibited without the appropriate license(s)  
from Microsoft.  
Content owners use Microsoft PlayReady™  
content access technology to protect their  
intellectual property, including copyrighted  
content. This device uses PlayReady  
technology to access PlayReady-protected  
content and/or WMDRM-protected content.  
If the device fails to properly enforce  
restrictions on content usage, content  
owners may require Microsoft to revoke the  
device’s ability to consume PlayReady-  
protected content. Revocation should not  
affect unprotected content or content  
protected by other content access  
• This product includes SkypeKit Version 3  
Copyright 2003-2010, Skype Limited  
Patents Pending  
Skype, associated trade marks and logos and  
the “S” symbol are trade marks of Skype  
Limited.  
®
®
• Wi-Fi , Wi-Fi Protected Access and Wi-  
®
Fi Alliance are registered marks of the Wi-  
Fi Alliance.  
• Wi-Fi CERTIFIED™, WPA™, WPA2™  
and Wi-Fi Protected Setup™ are marks of  
the Wi-Fi Alliance.  
technologies. Content owners may require  
you to upgrade PlayReady to access their  
content. If you decline an upgrade, you will  
not be able to access content that requires  
the upgrade.  
• The Wi-Fi CERTIFIED Logo is a  
certification mark of the Wi-Fi Alliance.  
• The Wi-Fi Protected Setup Mark is a mark  
of the Wi-Fi Alliance.  
• Music and video recognition technology and  
®
®
related data are provided by Gracenote .  
• DLNA , the DLNA Logo and DLNA  
Gracenote is the industry standard in music  
recognition technology and related content  
delivery. For more information, please visit  
CD, DVD, Blu-ray Disc, and music and  
video-related data from Gracenote, Inc.,  
CERTIFIED™ are trademarks, service  
marks, or certification marks of the Digital  
Living Network Alliance.  
• All other trademarks are trademarks of their  
respective owners.  
6
 
Gracenote makes no representations or  
warranties, express or implied, regarding the  
accuracy of any Gracenote Data from in the  
Gracenote Servers. Gracenote reserves the right  
to delete data from the Gracenote Servers or to  
change data categories for any cause that  
Gracenote deems sufficient. No warranty is made  
that the Gracenote Software or Gracenote Servers  
are error-free or that functioning of Gracenote  
Software or Gracenote Servers will be  
uninterrupted. Gracenote is not obligated to  
provide you with new enhanced or additional data  
types or categories that Gracenote may provide in  
the future and is free to discontinue its services at  
any time.  
• Other system and product names are  
generally trademarks or registered  
trademarks of the manufacturers. ™ and ®  
marks are not indicated in this document.  
End User License Information  
®
Gracenote End User License  
Agreement  
This application or device contains software from  
Gracenote, Inc. of Emeryville, California  
(“Gracenote”). The software from Gracenote (the  
“Gracenote Software”) enables this application to  
perform disc and/or file identification and obtain  
music-related information, including name, artist,  
track, and title information (“Gracenote Data”)  
from online servers or embedded databases  
(collectively, “Gracenote Servers”) and to  
perform other functions. You may use Gracenote  
Data only by means of the intended End-User  
functions of this application or device.  
GRACENOTE DISCLAIMS ALL  
WARRANTIES EXPRESS OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO,  
IMPLIED WARRANTIES OF  
MERCHANTABILITY, FITNESS FOR A  
PARTICULAR PURPOSE, TITLE, AND NON-  
INFRINGEMENT. GRACENOTE DOES NOT  
WARRANT THE RESULTS THAT WILL BE  
OBTAINED BY YOUR USE OF THE  
GRACENOTE SOFTWARE OR ANY  
GRACENOTE SERVER. IN NO CASE WILL  
GRACENOTE BE LIABLE FOR ANY  
CONSEQUENTIAL OR INCIDENTAL  
DAMAGES OR FOR ANY LOST PROFITS OR  
LOST REVENUES.  
You agree that you will use Gracenote Data, the  
Gracenote Software, and Gracenote Servers for  
your own personal non-commercial use only.  
You agree not to assign, copy, transfer or transmit  
the Gracenote Software or any Gracenote Data to  
any third party. YOU AGREE NOT TO USE OR  
EXPLOIT GRACENOTE DATA, THE  
GRACENOTE SOFTWARE, OR  
GRACENOTE SERVERS, EXCEPT AS  
EXPRESSLY PERMITTED HEREIN.  
© Gracenote, Inc. 2009  
You agree that your non-exclusive license to use  
the Gracenote Data, the Gracenote Software, and  
Gracenote Servers will terminate if you violate  
these restrictions. If your license terminates, you  
agree to cease any and all use of the Gracenote  
Data, the Gracenote Software, and Gracenote  
Servers. Gracenote reserves all rights in  
Gracenote Data, the Gracenote Software, and the  
Gracenote Servers, including all ownership  
rights. Under no circumstances will Gracenote  
become liable for any payment to you for any  
information that you provide. You agree that  
Gracenote, Inc. may enforce its rights under this  
Agreement against you directly in its own name.  
The Gracenote service uses a unique identifier to  
track queries for statistical purposes. The purpose  
of a randomly assigned numeric identifier is to  
allow the Gracenote service to count queries  
without knowing anything about who you are.  
For more information, see the web page for the  
Gracenote Privacy Policy for the Gracenote  
service.  
The Gracenote Software and each item of  
Gracenote Data are licensed to you “AS IS.”  
7
 
Table of Contents  
8
 
Guide to Parts and Controls  
Front panel  
A [/1 (on/standby)  
Turns on the player, or sets to  
standby mode.  
To lock the disc tray (Child Lock)  
You can lock the disc tray to prevent it  
being opened by mistake.  
When the player is turned on, hold down  
N on the player for more than 10  
seconds. The disc tray is locked or  
unlocked.  
B Disc tray  
C Front panel display  
N, X: Lights up during playback  
or pause.  
About soft-touch buttons/indicators  
These buttons, 4, 5 and 6, function  
when the soft-touch button indicators are  
lit.  
: Lights up when enabling the  
repeat setting.  
: Lights up when outputting  
720p/1080i/1080p video signals.  
You can turn on/off the indicators by  
setting [Dimmer] in the [System  
Settings] setup (page 33).  
D Z (open/close)  
E N (play)  
F x (stop)  
b
These buttons work when you touch them  
lightly. Do not press them with excessive  
force.  
G
(USB) jack  
Connect a USB device to this jack.  
H Remote sensor  
z
These buttons still work, even if you turn off  
the indicators by setting [Dimmer] to [Off].  
9
 
       
Rear panel  
A LINE OUT (VIDEO) jack  
E LINE OUT (R-AUDIO-L) jacks  
F HDMI OUT 1 jack  
B DIGITAL OUT (COAXIAL)  
jack  
G HDMI OUT 2 jack  
C Ventilation holes  
H
(USB) jack  
D DIGITAL OUT (OPTICAL)  
I LAN (100) terminal  
jack  
10  
 
 
-TV- t (TV input select)  
Switches between TV and other  
input sources.  
Remote  
The available functions of the remote  
differ depending on the disc or the  
situation.  
-TV- [/1 (on/standby)  
Turns on the TV, or sets to standby  
mode.  
[/1 (on/standby)  
Turns on the player, or sets to  
standby mode.  
B Number buttons (0 - 9)  
Enters the title/chapter numbers, etc.  
2 (volume) +/–  
Adjusts the TV volume.  
(muting)  
Turns off the sound temporarily.  
Selects the language track when  
multi-lingual tracks are recorded on  
BD-ROMs/DVD VIDEOs.  
Selects the sound track on CDs.  
Converts 2D content into simulated  
3D content when connected to 3D-  
compatible devices.  
Selects the subtitle language when  
multi-lingual subtitles are recorded  
on BD-ROMs/DVD VIDEOs.  
C Colour buttons (red/green/  
yellow/blue)  
Shortcut keys for interactive  
functions.  
z
D TOP MENU  
Number 5, AUDIO, 2 +, and N buttons  
have a tactile dot. Use the tactile dot as a  
reference when operating the player.  
Opens or closes the BD’s or DVD’s  
Top Menu.  
SEN  
Accesses the “Sony Entertainment  
Network™” online service.  
A Z (open/close)  
Opens or closes the disc tray.  
11  
 
             
POP UP/MENU  
Opens or closes the BD-ROM’s  
N (play)  
Starts or re-starts playback.  
Pop-up Menu, or the DVD’s menu.  
Displays the playback and web  
OPTIONS (page 22)  
The options menu that can be  
browsing information on the screen.  
selected appears on the screen.  
X (pause)  
Pauses or re-starts playback.  
HOME  
Enters the player’s home menu.  
Displays the wallpaper when  
pressed on the category icon of the  
home menu.  
x (stop)  
Stops playback and remembers the  
stop point (resume point).  
The resume point for a title/track is  
the last point you played or the last  
photo for a photo folder.  
RETURN  
Returns to the previous display.  
</M/m/,  
Moves the highlight to select a  
displayed item.  
Home menu display  
Centre button (ENTER)  
Enters the selected item.  
The home menu appears when you press  
HOME. Select a category using </,.  
Select an item using M/m, then press  
ENTER.  
E ./> (previous/next)  
Skips to the previous/next chapter,  
track, or file.  
Item  
Category  
/
(replay/advance)  
Briefly replays the current scenes for  
10 seconds/briefly fast forwards the  
current scenes for 15 seconds.  
m/M (fast/slow/freeze  
frame)  
• Fast reverses/fast forwards the disc  
when pressed during playback.  
Each time you press the button  
during playback of videos, the  
search speed changes.  
• Plays in slow motion, when  
pressed for more than one second  
in pause mode.  
[Setup]: Adjusts the player settings.  
[Photo]: Displays photos.  
[Music]: Plays music.  
[Video]: Plays videos.  
• Plays one frame at a time, when  
pressed briefly in pause mode.  
[Network]: Displays network items.  
z
Playback in slow motion or one frame is  
not available for a Blu-ray 3D Disc.  
12  
 
         
Hookups and Settings  
Step 1: Connecting the Player  
Do not connect the mains lead until you have made all the other connections.  
For supplied accessories, see “Supplied accessories” (page 40).  
Connecting to your TV  
Select one of the following connection methods according to the input jacks on your  
TV.  
Match the colour of the plug to that of the jack when connecting.  
High quality  
High Speed HDMI Cable*1  
(not supplied)  
Audio/video cable*1  
Standard  
quality  
*1  
b
Do not connect the player through a VCR. Video signals fed through VCRs may be affected by  
copyright protection systems and the picture will be distorted on the television.  
13  
 
       
Connecting to your AV amplifier (receiver)  
Select one of the following connection methods according to the input jacks on your  
AV amplifier (receiver). When you select A or B, make the appropriate settings in  
the [Audio Settings] setup (page 31).  
High Speed HDMI Cable*1  
(not supplied)  
High Speed HDMI Cable  
(not supplied)  
*2  
*1  
t Set [BD Audio MIX Setting] (page 31).  
Coaxial digital cable (not supplied)  
or  
Optical digital cable (not supplied)  
t Set [Dolby Digital]*3/[DTS]*4 (page 31).  
Audio/video cable*5  
14  
 
 
U.S. and worldwide patents issued &  
pending. DTS-HD, the Symbol, & DTS-  
HD and the Symbol together are registered  
trademarks & DTS-HD Master Audio is a  
trademark of DTS, Inc. Product includes  
software. © DTS, Inc. All Rights Reserved.  
About AV Separation Mode  
This mode allows you to output video  
signals via the HDMI OUT 1 jack and  
audio signals via the HDMI OUT 2 jack  
separately (page 34).  
*5  
Example:  
The illustration below shows an example  
where a TV (3D-compatible) and an AV  
amplifier (not 3D-compatible) are  
connected.  
*1  
*1  
AV amplifier  
(not 3D-compatible)  
TV (3D-compatible)  
*1  
Use a High Speed HDMI Cable. We  
recommend using a Sony HDMI cable  
(available at your nearest Sony dealer or  
local authorized Sony service facility, with  
part number 1-834-169-22, as of February  
2012, or equivalent).  
To enjoy 3D viewing, connect a TV and an  
AV amplifier that are both 3D-compatible.  
Manufactured under license from Dolby  
Laboratories.  
*2  
*3  
Dolby, Pro Logic, and the double-D  
symbol are trademarks of Dolby  
Laboratories.  
Manufactured under license under U.S.  
Patent Nos: 5,956,674; 5,974,380;  
6,226,616; 6,487,535; 7,212,872;  
7,333,929; 7,392,195; 7,272,567 & other  
*4  
15  
 
 
Before setting the network settings  
When your wireless LAN router (access  
point) is Wi-Fi Protected Setup (WPS)-  
compatible, you can easily set the  
network settings with the WPS button.  
If not, check the following information  
in advance, and record it in the space  
provided below.  
Step 2: Preparing for  
Network Connection  
Wired Setup  
1
– The network name (SSID* ) that  
Use a LAN cable to connect to the LAN  
(100) terminal on the player.  
2
identifies your network* .  
1
SSID* :  
– If security is set on your wireless  
network, the security key (WEP key,  
WPA key)* .  
LAN cable  
(not supplied)  
2
Security key:  
*1  
ADSL modem/ Internet  
Cable modem  
Broadband  
router  
SSID (Service Set Identifier) is a name that  
identifies a particular wireless network.  
You need to check the setting of your  
*2  
wireless LAN router for information about  
the SSID and security key.  
For details:  
z
Using a shielded interface cable (LAN cable)  
is recommended.  
– visit the following website:  
For customers in European countries  
– refer to the instruction manual supplied  
with the wireless LAN router  
– consult the manufacturer of the wireless  
LAN router.  
Wireless Setup  
Use the wireless LAN that is built into  
the player.  
LAN cable  
(not supplied)  
ADSL modem/ Internet  
Cable modem  
Wireless  
LAN router  
z
Use a wireless LAN router supporting  
802.11b/g or 802.11b/g/n.  
16  
 
     
5 Perform [Easy Setup].  
Follow the on-screen instructions to  
make the basic settings using </M/  
m/, and ENTER on the remote.  
Step 3: Easy Setup  
When turned on for the first time  
Wait for a short while before the  
player turns on and starts [Easy  
Setup].  
</M/m/,  
ENTER  
1 Insert two R6 (Size AA) batteries  
by matching the 3and #ends on  
the batteries to the markings  
inside the battery compartment.  
2 Plug the player into the mains.  
to AC outlet  
3 Press [/1 to turn on the player.  
4 Turn on the TV, then switch the  
input selector on your TV so that  
the signal from the playerappears  
on your TV screen.  
17  
 
   
As your local storage, use a 1 GB or  
larger USB memory.  
Playback  
2 Prepare for BD-LIVE (BD-LIVE  
only).  
Playing a Disc  
• Connect the player to a network  
For playable discs, see “Playable discs”  
• Set [BD Internet Connection] to  
[Allow] (page 32).  
3 Insert a BD-ROM with  
BONUSVIEW/BD-LIVE.  
The operation method differs  
depending on the disc. Refer to the  
instruction manual supplied with the  
disc.  
1 Switch the input selector on your  
TV so that the signal from the  
player appears on your TV screen.  
2 Press Z, and place a disc on the  
disc tray.  
z
To delete data in the USB memory, select  
[Erase BD Data] in the  
[Video], and press  
ENTER. All data stored in the buda folder  
will be erased.  
Playing side facing down  
Enjoying Blu-ray 3D  
3 Press Z to close the disc tray.  
Playback starts.  
You can enjoy a Blu-ray 3D Disc with  
the “Blu-ray 3D” logo*.  
If playback does not start  
automatically, select  
[Video], [Music], or  
in the  
[Photo]  
*
category, and press ENTER.  
1 Prepare for Blu-ray 3D Disc  
playback.  
• Connect the player to your 3D-  
compatible devices using a High  
Speed HDMI cable.  
• Set [3D Output Setting] and [TV  
Screen Size Setting for 3D] in the  
[Screen Settings] setup (page 29).  
Enjoying BONUSVIEW/BD-  
LIVE  
Some BD-ROMs with the “BD-LIVE”  
logo* have bonus content and other data  
that can be downloaded for enjoyment.  
2 Insert a Blu-ray 3D Disc.  
The operation method differs  
depending on the disc. Refer to the  
*
1 Connect a USB memory to the  
USB jack on the rear of the player  
18  
 
       
instruction manual supplied with the  
disc.  
Bitrate, Repeat type, Elapsed time,  
and Total playing time.  
F Chapter number  
z
G The currently selected angle  
Refer also to the instruction manuals supplied  
with your TV and the connected device.  
Displaying the play  
information  
Playing from a USB  
Device  
You can check playback information,  
etc., by pressing DISPLAY.  
The displayed information differs  
depending on the disc type and player  
status.  
You can play video/music/photo files on  
the connected USB device.  
For playable USB devices, see “Playable  
1 Connect the USB device to the  
USB jack on the player (page 9).  
Refer to the instruction manual  
supplied with the USB device before  
connecting.  
Example: when playing a BD-ROM  
2 Select  
[Video],  
[Photo] on the home menu  
[Music],  
or  
using </,.  
3 Select  
[USB device (front)]  
using M/m, and press ENTER.  
A Output resolution/Video  
frequency  
Playing via a Network  
B Title number or name  
C The currently selected audio  
Enjoying Sony  
Entertainment Network  
(SEN)  
setting  
D Available functions (  
angle,  
audio,  
subtitle)  
E Playback information  
Serves as a gateway delivering the  
selected Internet content and a variety of  
on-demand entertainment straight to  
your player.  
Displays the Play mode, Playing  
status bar, Disc type, Video codec,  
19  
 
           
z
D Network transmission speed  
• Some Internet content requires registration  
via a PC before it can be played.  
• Some Internet content may not be available  
in some regions/countries.  
E The next video file name  
F The currently selected video file  
name  
1 Connect the player to a network  
Playing files on a Home  
Network (DLNA)  
2 Press SEN.  
3 Select the Internet content and a  
The player (DLNA Player) can play  
video/music/photo files stored on  
another DLNA-compatible product  
(DLNA Server) via a network.  
variety of on-demand  
entertainmentusing</M/m/,,  
and press ENTER.  
To use the control panel during video  
streaming  
The control panel appears when a video  
file starts playing. The displayed items  
may differ depending on the Internet  
content provider.  
Server  
Player  
1 Prepare for using DLNA.  
• Connect the player to a network  
To display again, press DISPLAY.  
• Prepare the other necessary  
DLNA-compatible products.  
Refer to the instruction manual  
supplied with the product.  
2 Select the DLNA Server icon from  
[Video], [Music], or  
A Control display  
[Photo] on the home menu.  
Press </M/m/, or ENTER for  
playback operations.  
3 Select the file you want to play  
using M/m, and press ENTER.  
B Playing status bar  
Status bar, Cursor indicating the  
current position, Playing time,  
Duration of the video file  
To control the player using another  
product (Renderer)  
C Network condition  
indicates the signal strength for  
wireless connection.  
indicates the wired  
When you play files from a DLNA  
Server on the player, you can use a  
connection.  
20  
 
 
DLNA Controller-compatible product (a  
phone, etc.) to control playback.  
2 Select a track in [Music] on the  
home menu.  
3 Select [Start PARTY] from the  
options menu.  
Server  
Renderer  
To join in a PARTY (for the PARTY  
guest only)  
Select  
[PARTY] in [Music], then  
Controller  
select the PARTY host device icon.  
z
To close the PARTY  
Select [Close PARTY] from the options  
menu.  
Refer to the instruction manual supplied with  
the DLNA Controller.  
z
Playing the same music in  
different rooms (PARTY  
STREAMING)  
The sale and lineup of products that are  
compatible with the PARTY STREAMING  
function differ depending on the area.  
You can play music files on the player  
(PARTY host) in other rooms  
simultaneously through Sony products  
(PARTY guest) which are compatible  
with DLNA and the PARTY  
Searching for the video/  
music information  
You can acquire content information  
based on Gracenote technology and  
search for the related information.  
STREAMING function, or vice versa.  
1 Connect the player to a network  
PARTY host  
2 Insert a disc you want to search.  
• Video: For a BD-ROM or DVD-  
ROM only  
PARTY guest  
PARTY guest  
• Music: For a CD-DA only  
3 Select  
[Video] or [Music]  
using </,.  
1 Prepare for PARTY STREAMING.  
• Connect the player to a network  
4 Select  
[Video Search] or  
[Music Search] using M/m,  
and press ENTER.  
• Connect the products which are  
compatible with the PARTY  
STREAMING function to a  
network.  
The content information is  
displayed.  
21  
 
   
Example: List of the selected cast’s  
works  
Item  
Details  
3D Menu  
• Simulated 3D:  
Adjusts the simulated  
3D effect.  
• 3D Depth  
Adjustment: Adjusts  
the depth of 3D  
image.  
Play/Stop  
Starts or stops the  
playback.  
A Content details  
Play from start Plays the item from the  
beginning.  
Displays a list of related  
information, such as title, cast, track,  
or artist.  
[Video] only  
Item  
Details  
B Playback History  
Displays a title in playback history  
of a BD-ROM/DVD-ROM/CD-DA.  
3D Output  
Setting  
Sets whether or not to  
output 3D video  
automatically.  
C Search History  
A/V SYNC  
Adjusts the gap  
Displays a list of search history.  
between picture and  
sound, by delaying the  
sound output in relation  
to the picture output (0  
to 120 milliseconds).  
To search for further related  
information  
Select an item in the lists, then select the  
service for searching.  
Available Options  
Various settings and playback  
operations are available by pressing  
OPTIONS. The available items differ  
depending on the situation.  
Common options  
Item  
Details  
Repeat  
Setting  
Sets the repeat mode.  
22  
 
     
Item  
Details  
Item  
Details  
Video Settings • Picture Quality  
Mode: Selects the  
picture settings.  
Angle  
Switches to other  
viewing angles when  
multi-angles are  
• Texture Remaster:  
Adjusts the sharpness  
and detail of the  
edges.  
• Super Resolution:  
Improves the  
recorded on BD-  
ROMs/DVD VIDEOs.  
IP Content NR Adjusts the picture  
Pro  
quality of Internet  
content.  
resolution.  
Video Search Displays information  
on the BD-ROM/DVD-  
ROM based on  
• Smoothing: Reduces  
on-screen banding by  
smoothing gradations  
on flat areas.  
Gracenote technology.  
• Contrast Remaster:  
Automatically  
arranges the black  
and white levels so  
that the screen is not  
too dark and the  
image is modulated.  
• Clear Black: Adjusts  
the display of the dark  
elements of the  
image. All shading is  
not suppressed; it  
allows beautifully  
reproduced black  
tones.  
[Music] only  
Item  
Details  
Add  
Slideshow  
BGM  
Registers music files in  
the USB memory as  
slideshow background  
music (BGM).  
Start PARTY Starts a PARTY with  
the selected source.  
This item may not  
appear, depending on  
the source.  
Leave PARTY Leaves from a PARTY  
which the player is  
participating in. The  
Pause  
Pauses the playback.  
PARTY STREAMING  
function continues  
among other  
Top Menu  
Displays the BD’s or  
DVD’s Top Menu.  
participating products.  
Menu/Popup Displays the BD-  
Menu  
ROM’s Pop-up Menu  
or DVD’s menu.  
Close PARTY Closes a PARTY which  
the player is  
participating in. The  
PARTY STREAMING  
function ends for all  
other participating  
Title Search  
Searches for a title on  
BD-ROMs/DVD  
VIDEOs and starts  
playback from the  
beginning.  
products.  
Music Search Displays information  
on the CD-DA based on  
Chapter  
Search  
Searches for a chapter  
and starts playback  
from the beginning.  
Gracenote technology.  
23  
 
 
[Photo] only  
Item  
Details  
Slideshow  
Speed  
Changes the slideshow  
speed.  
Slideshow  
Effect  
Sets the effect for  
slideshows.  
Slideshow  
BGM  
• Off: Turns off the  
function.  
• My Music from USB:  
Sets the music files  
registered in [Add  
Slideshow BGM].  
• Play from Music CD:  
Sets the tracks in CD-  
DAs.  
Switch Display Switchesbetween[Grid  
View] and [List View].  
Slideshow  
Rotate Left  
Plays a slideshow.  
Rotates the photo  
counterclockwise by  
90 degrees.  
Rotate Right  
Rotates the photo  
clockwise by 90  
degrees.  
24  
 
To quit the Internet browser  
Press HOME.  
Internet  
Internet browser display  
Browsing Websites  
You can check the website information  
by pressing DISPLAY.  
The display information differs  
depending on the website and page  
status.  
You can connect to the Internet and  
enjoy websites.  
1 Connect the player to a network  
2 Select  
[Network] on the home  
menu using </,.  
3 Select  
[Internet Browser]  
using M/m, and press ENTER.  
z
Some websites use functions which this  
browser does not support. Some websites may  
not be displayed correctly, or may not  
function.  
A Page title  
B Page address  
C Cursor  
To enter a URL  
To view a linked site, press </M/  
m/, to move the cursor, and press  
ENTER.  
Select [URL entry] from the options  
menu. Enter the URL using the software  
keyboard, then select [Enter].  
D SSL icon  
Appears when the website is  
secured.  
To set the default start page  
While displaying the page you want to  
set, select [Set as start page] from the  
options menu.  
E Signal strength indicator (wireless  
network connection only)  
F Progress bar/Loading icon  
Appears when the page is being  
read, or during file download/  
transfer.  
To return to the previous page  
Select [Previous page] from the options  
menu.  
When the previous page does not appear  
even if you select [Previous page], select  
[Window List] from the options menu  
and select the page you want to return to  
from the list.  
G Text input field  
Press ENTER and select [Input]  
from the options menu to display the  
software keyboard.  
25  
 
     
H Scroll bar  
Item  
Details  
Press </M/m/, to move the page  
display.  
URL entry  
Allows you to enter a  
URL when the software  
keyboard is displayed.  
Previous  
page/Next  
page  
Moves to the previous/  
next page.  
Available options  
Various settings and operations are  
available by pressing OPTIONS.  
The available items differ depending on  
the situation.  
Cancel  
loading  
Stops loading a page.  
Reloads the same page.  
Reload  
Item  
Details  
Add to  
Bookmark  
Adds the currently  
displayed website to the  
bookmark list.  
Browser  
Setup  
• Zoom: Increases or  
decreases the size of  
the displayed  
Set as start  
page  
Sets the currently  
displayed website as the  
default start page.  
contents.  
• JavaScript Setup:  
Enables or disables  
JavaScript.  
• Cookie Setup: Sets  
whether or not to  
accept cookies.  
• SSL Alarm Display:  
Enables or disables  
SSL.  
Open in new  
window  
Opens a link in a new  
window.  
Character  
encoding  
Sets the character code.  
Display  
certificate  
View server certificates  
sent from pages that  
support SSL.  
Input  
Displays the software  
keyboard to enter  
characters while  
browsing a website.  
Enjoying Skype  
Break  
Moves the cursor to the  
next line in the text  
input field.  
Skype is a communication software  
using the Internet.  
You can enjoy Skype-to-Skype video  
calls/voice calls for free with the player.  
Delete  
Erases one character on  
the left side of the  
cursor during text input.  
Window List  
Displays a list of  
currently opened  
windows of website.  
Allows you to return to  
a previously displayed  
website by selecting the  
window.  
PC  
Bookmark List Displays the bookmark  
list.  
1 Prepare for Skype.  
26  
 
   
• Connect the player to a network  
C Tab area  
• Contacts: Displays the contacts to  
• Connect the web camera with  
microphone to the USB jack  
call.  
• History: Displays the call history.  
• Tools: Enables useful functions  
such as contact search.  
• Settings  
2 Select  
[Network] on the home  
menu using </,.  
To make a call  
Select the contact icon you want to call  
in the Skype menu, and press ENTER.  
3 Select [Skype] using M/m, and  
press ENTER.  
When you start Skype for the first  
time, follow the on-screen  
instructions and sign in to use  
Skype. If you do not have your own  
account, create one.  
To receive a call  
Activate Skype and sign in.  
To quit Skype  
Press HOME.  
Once you sign in, your password will be  
saved in the player when you quit Skype.  
To delete your password, sign out of  
Skype before quitting.  
z
For information about available web cameras,  
visit the following website:  
For customers in European countries  
For customers in Australia/New Zealand  
To sign in using another account  
Select [Sign Out] from the options menu.  
Select  
on the home menu, and follow  
the on-screen instructions.  
Using the Skype menu  
After signing-in, you can make/receive a  
call or make Skype settings.  
Skype display  
A Your Skype name  
A Contact name  
B Signal strength indicator (wireless  
B Video of the contact (for video  
network connection only)  
calls only)  
27  
 
C Signal strength indicator/Network  
transmission speed (wireless  
network connection only)  
D Video of yourself (for video calls  
only)  
E Available buttons  
The available buttons differ  
depending on the situation.  
• Full screen/Window screen:  
Changes the display mode.  
• Hang Up  
• Hold/Resume  
• Mute/Unmute  
• Start My Video/Stop My Video:  
Displays/hides the video of  
yourself.  
• Voice call/Video call  
Available options  
Various settings and operations are  
available by pressing OPTIONS.  
The available items differ depending on  
the situation.  
Item  
Details  
Switch Display Changes the display for  
contact/history.  
Change  
Status  
Changes the Skype  
status.  
Sign Out  
Exits Skype.  
About Skype Displays the copyright  
screen.  
Help  
Displays the Skype  
help.  
28  
 
Icon  
Explanation  
Music Settings  
Settings and Adjustments  
Makes detailed settings for  
Super Audio CD playback.  
Using the Settings  
Displays  
System Settings  
Makes the player-related  
settings.  
Select  
[Setup] on the home menu  
when you need to change the settings of  
the player.  
The default settings are underlined.  
Network Settings  
Makes detailed settings for  
the Internet and network.  
1 Select  
[Setup] on the home  
menu using </,.  
Easy Setup (page 35)  
Re-runs the Easy Setup to  
make the basic settings.  
2 Select the setup category icon  
Resetting (page 35)  
Resets the player to the  
factory settings.  
using M/m, and press ENTER.  
Icon  
Explanation  
Network Update  
Updates the software of the  
player.  
Network Update  
Screen Settings  
Makes the video settings  
according to the type of  
connecting jacks.  
Select [OK] to update the player’s  
software via the network.  
z
• We recommend the network update every 2  
months or so.  
• For information about update functions,  
visit the following website:  
Audio Settings  
Makes the audio settings  
according to the type of  
connecting jacks.  
For customers in European countries  
For customers in Australia/New Zealand  
BD/DVD Viewing  
Settings (page 32)  
Makes detailed settings for  
BD/DVD playback.  
Parental Control  
Settings (page 33)  
Makes detailed settings for  
the Parental Control  
function.  
Screen Settings  
3D Output Setting  
Auto: Normally select this.  
29  
 
               
Off: Select this to display all content in  
2D.  
Cinema Conversion Mode  
Auto: Normally select this. The player  
automatically detects whether the  
material is video-based or film-  
based, and switches to the  
z
If you enjoy 4K/24p 3D contents, set to [Off]  
in [3D Output Setting].  
appropriate conversion method.  
Video: The conversion method suited for  
video-based material will always be  
selected, regardless of the material.  
TV Screen Size Setting for 3D  
Sets the screen size of your 3D-  
compatible TV.  
Output Video Format  
TV Type  
HDMI: Normally select [Auto]. Select  
[Original Resolution] to output the  
resolution recorded on the disc.  
When the resolution is lower than  
the SD resolution, it is scaled up to  
the SD resolution.  
16:9: Select this when connecting to a  
wide-screen TV or a TV with a wide  
mode function.  
4:3: Select this when connecting to a 4:3  
screen TV without a wide mode  
function.  
Video: Automatically sets the lowest  
resolution.  
Screen Format  
Full: Select this when connecting to a  
TV with a wide mode function.  
Displays a 4:3 screen picture in 16:9  
aspect ratio, even on a wide-screen  
TV.  
Normal: Changes the picture size to fit  
the screen size with the original  
picture aspect ratio.  
BD-ROM 24p Output  
Auto: Outputs 1080/24p or 4K/24p  
video signals only if you connect a  
1080/24p or 4K/24p-compatible TV  
with the HDMI OUT jack.  
On: Select this if your TV is compatible  
with 1080/24p or 4K/24p video  
signals.  
Off: Select this if your TV is not  
compatible with 1080/24p or 4K/  
24p video signals.  
DVD Aspect Ratio  
Letter Box: Displays a wide picture with  
black bands on the top and bottom.  
DVD-ROM 24p Output  
Auto: Outputs 1080/24p or 4K/24p  
video signals only if you connect a  
1080/24p or 4K/24p-compatible TV  
with the HDMI OUT jack.  
Off: Select this if your TV is not  
compatible with 1080/24p or 4K/  
24p video signals.  
Pan & Scan: Displays a full-height  
picture on the entire screen, with  
trimmed sides.  
30  
 
       
4K Output  
Pause Mode  
Auto: Outputs 4K/24p video signals  
automatically if you connect a 4K/  
24p -compatible device and make  
the appropriate settings in [BD-  
ROM 24p Output] or [DVD-ROM  
24p Output], and also outputs 4K/  
24p photo images if you play 2D  
photo files.  
Auto: Normally select this. Dynamic  
moving pictures appear without  
blurring.  
Frame: Displays static pictures at high  
resolution.  
Off: Turns off the function.  
Audio Settings  
YCbCr/RGB (HDMI)  
Audio (HDMI)  
Auto: Automatically detects the  
connected TV type, and switches to  
the matching colour setting.  
YCbCr (4:2:2): Outputs YCbCr 4:2:2  
video signals.  
Auto: Normally select this. Outputs  
audio signals according to the status  
of the connected HDMI device.  
PCM: Outputs PCM signals from the  
HDMI OUT jack.  
YCbCr (4:4:4): Outputs YCbCr 4:4:4  
video signals.  
RGB: Outputs RGB video signals.  
DSD Output Mode  
On: Outputs DSD signals from the  
HDMI OUT jack when playing a  
Super Audio CD. When [On] is  
selected, no signal is output from  
other jacks.  
Off: Outputs PCM signals from the  
HDMI OUT jack when playing a  
Super Audio CD.  
HDMI Deep Colour Output  
Auto: Normally select this.  
16bit/12bit/10bit: Outputs 16bit/12bit/  
10bit video signals when the  
connected TV is compatible with  
Deep Colour.  
Off: Select this when the picture is  
unstable or colours appear  
unnatural.  
BD Audio MIX Setting  
On: Outputs the audio obtained by  
mixing the interactive and  
secondary audio to the primary  
audio.  
Off: Outputs the primary audio only.  
Select this to output HD audio  
signals to an AV amplifier  
(receiver).  
SBM (Super Bit Mapping)  
On: Smooths the gradation of video  
signals output from the HDMI OUT  
jack.  
Off: Select this when outputting  
distorted video signals or unnatural  
colour.  
Dolby Digital / DTS  
Downmix PCM: Converts to output  
Linear PCM signals. Select this  
when connecting an audio device  
31  
 
                 
without a built-in Dolby Digital/  
DTS decoder.  
Bitstream: Select this when connecting  
an audio device with a built-in  
Dolby Digital/DTS decoder.  
BD/DVD Viewing  
Settings  
BD/DVD Menu Language  
Selects the default menu language for  
BD-ROMs or DVD VIDEOs.  
When you select [Select Language  
Code], the display for entering the  
language code appears. Enter the code  
for your language by referring to  
DTS Neo:6  
Cinema: Outputs the simulated multi-  
channel sound from 2 channel  
sources via the HDMI OUT jack  
according to the capability of the  
connected device using [DTS Neo:6  
Cinema] mode.  
Music: Outputs the simulated multi-  
channel sound from 2 channel  
sources via the HDMI OUT jack  
according to the capability of the  
connected device using [DTS Neo:6  
Music] mode.  
Audio Language  
Selects the default track language for  
BD-ROMs or DVD VIDEOs.  
When you select [Original], the  
language given priority in the disc is  
selected.  
When you select [Select Language  
Code], the display for entering the  
language code appears. Enter the code  
for your language by referring to  
Off: Outputs the sound with its original  
number of channels via the HDMI  
OUT jack.  
Audio DRC  
Auto: Performs playback at the dynamic  
range specified by the disc (BD-  
ROM only). Other discs are played  
back at the [On] level.  
Subtitle Language  
Selects the default subtitle language for  
BD-ROMs or DVD VIDEOs.  
When you select [Select Language  
Code], the display for entering the  
language code appears. Enter the code  
for your language by referring to  
On: Performs playback at a standard  
compression level.  
Off: No compression works. A more  
dynamic sound is produced.  
Downmix  
Surround: Outputs audio signals with  
surround effects. Select this when  
connecting an audio device that  
supports Dolby Surround (Pro  
Logic) or DTS Neo:6.  
BD Hybrid Disc Playback Layer  
BD: Plays BD layer.  
DVD/CD: Plays DVD or CD layer.  
Stereo: Outputs audio signals without  
surround effects. Select this when  
connecting an audio device that does  
not support Dolby Surround (Pro  
Logic) or DTS Neo:6.  
BD Internet Connection  
Allow: Normally select this.  
Do not allow: Prohibits Internet  
connection.  
32  
 
         
Parental Control  
Settings  
Music Settings  
Super Audio CD Playback Layer  
Super Audio CD: Plays the Super Audio  
CD layer.  
Password  
Sets or changes the password for the  
Parental Control function. A password  
allows you to set a restriction on BD-  
ROM or DVD VIDEO, and Internet  
video playback. If necessary, you can  
differentiate the restriction levels for  
BD-ROMs, DVD VIDEOs, and Internet  
videos.  
CD: Plays the CD layer.  
Super Audio CD Playback Channels  
DSD 2ch: Plays the 2ch area.  
DSD Multi: Plays the multi-channel  
area.  
Parental Control Area Code  
System Settings  
Playback of some BD-ROMs, DVD  
VIDEOs, or Internet videos can be  
limited according to the geographic area.  
Scenes may be blocked or replaced with  
different scenes. Follow the on-screen  
instructions and enter your four-digit  
password.  
OSD Language  
Selects your language for the player on-  
screen displays.  
Dimmer  
Bright: Bright lighting.  
Dark: Low lighting.  
Off: Turns off the lighting during  
playback. Low lighting other than  
during playback.  
BD Parental Control/DVD Parental  
Control/Internet Video Parental  
Control  
By setting Parental Control, scenes can  
be blocked or replaced with different  
scenes. Follow the on-screen  
instructions and enter your four-digit  
password.  
Control for HDMI  
On: The following BRAVIA Sync  
features are available:  
–One-Touch Play  
Internet Video Unrated  
Allow: Allows the playback of unrated  
Internet videos.  
Block: Blocks the playback of unrated  
Internet videos.  
–System Power-Off  
–Language Follow  
Off: Turns off the function.  
z
For details, refer to the instruction manual  
supplied with the TV or components. To  
enable the BRAVIA Sync features, connect  
your TV via the HDMI OUT 1 jack.  
33  
 
                   
HDMI:Linked to TV-off  
Software Update Notification  
On: Sets the player to inform you of  
newer software version information  
On: Automatically turns off the player  
and HDMI-compatible components  
when the connected TV enters  
standby mode (BRAVIA Sync).  
Off: Turns off the function.  
Off: Turns off the function.  
Gracenote Settings  
AV Separation Output Mode  
On: Outputs video signals via the HDMI  
OUT 1 jack and audio signals via the  
HDMI OUT 2 jack separately.  
Off: Outputs video signals and audio  
signals simultaneously via both the  
HDMI OUT 1 jack and the HDMI  
OUT 2 jack.  
Auto: Automatically downloads disc  
information when disc playback  
stops. Connect to the network for  
downloading.  
Manual: Downloads the disc  
information when [Video Search] or  
[Music Search] is selected.  
System Information  
Displays the player’s software version  
information and the MAC address.  
Quick Start Mode  
On: Shortens the startup time when  
turning on the player.  
Off: Reduces standby power  
consumption.  
Software License Information  
Displays the Software License  
Information.  
Auto Standby  
On: Automatically returns to standby mode  
if no button is pressed for more than 30  
minutes.  
Network Settings  
Off: Turns off the function.  
Internet Settings  
Auto Display  
Connect the player to the network  
beforehand. For details, see “Step 2:  
On: Automatically displays information  
on the screen when changing the  
viewing titles, picture modes, audio  
signals, etc.  
Wired Setup: Select this when you  
connect to a broadband router using  
a LAN cable.  
Off: Displays information only when  
you press DISPLAY.  
Wireless Setup(built-in): Select this  
when you use the wireless LAN that  
is built into the player for wireless  
network connection.  
View Network Status: Displays the  
current network status.  
Screen Saver  
On: Turns on the screen saver function.  
The screen saver image appears  
when you do not use the player for  
more than 10 minutes while an on-  
screen display is displayed.  
Off: Turns off the function.  
34  
 
               
z
Registered Media Remote Devices  
Displays a list of your registered “Media  
Remote” devices.  
For further details, visit the following website  
and check the FAQ contents:  
For customers in European countries  
Remote Start  
On: Permits turning on the system from  
the “Media Remote” device.  
Off: Turns off the function.  
Network Connection Diagnostics  
You can run the network diagnostic to  
check if the network connection has  
been made properly.  
Easy Setup  
Connection Server Settings  
Sets whether or not to display the  
connected server.  
Easy Initial Settings  
Runs [Easy Initial Settings] to make the  
basic settings. Follow the on-screen  
instructions.  
Renderer Set-up  
Automatic Access Permission: Sets  
whether or not to allow automatic  
access from a newly detected DLNA  
controller-compatible product.  
Renderer Name: Displays the player’s  
name as it is listed on other DLNA  
products on the network.  
Easy Network Settings  
Runs [Easy Network Settings] to make  
the basic network settings. Follow the  
on-screen instructions.  
Renderer Access Control  
Displays a list of DLNA controller-  
compatible products and sets whether or  
not each product is accessible via this  
player.  
Resetting  
Reset to Factory Default Settings  
You can reset the player settings to the  
factory default by selecting the group of  
settings. All the settings within the group  
will be reset.  
PARTY Auto Start  
On: Starts a PARTY or joins an existing  
PARTY at the request of a  
networked product compatible with  
the PARTY STREAMING function.  
Off: Turns off the function.  
Initialize Personal Information  
You can erase your personal information  
stored in the player.  
Media Remote Device Registration  
Registers your “Media Remote” device.  
35  
 
           
The display language on the screen  
switches automatically when  
connected to the HDMI OUT jack.  
, When [Control for HDMI] is set to  
[On] (page 33), the display language  
on the screen automatically switches  
according to the language setting of the  
connected TV (if you change the  
setting on your TV, etc.).  
Additional Information  
Troubleshooting  
If you experience any of the following  
difficulties while using the player, use  
this troubleshooting guide to help  
remedy the problem before requesting  
repairs. Should any problem persist,  
consult your nearest Sony dealer.  
Sound  
There is no sound or the sound is not  
output correctly.  
Picture  
, Check that all the connecting cables  
are securely connected (page 13).  
, Switch the input selector on your AV  
amplifier (receiver) so that the audio  
signals of the player are output from  
your AV amplifier (receiver).  
There is no picture or the picture is  
not output correctly.  
, Check that all the connecting cables  
are securely connected (page 13).  
, Switch the input selector on your TV  
to display the signal from the player.  
, Reset the video output resolution to the  
lowest resolution by pressing x on the  
player for more than 10 seconds.  
, For HDMI connections, try the  
following: 1Turn the player off and  
on again. 2Turn the connected  
, If the audio signal does not come  
through the DIGITAL OUT  
(OPTICAL/COAXIAL)/HDMI OUT  
jack, check the audio settings  
, For HDMI connections, try the  
following: 1Turn the player off and  
on again. 2Turn the connected  
equipment off and on again.  
equipment off and on again.  
3Disconnect and then reconnect the  
HDMI cable.  
3Disconnect and then reconnect the  
HDMI cable.  
, The HDMI OUT jack is connected to a  
DVI device that does not support  
copyright protection technology.  
, For HDMI connections, check the  
[Output Video Format] settings in the  
[Screen Settings] setup (page 30).  
, When the analogue signals are also  
output, set [BD-ROM 24p Output] or  
[DVD-ROM 24p Output] to [Off] in  
the [Screen Settings] setup (page 30).  
, For BD-ROMs, check the [BD-ROM  
24p Output] setting in the [Screen  
Settings] setup (page 30).  
, For HDMI connections, if the player is  
connected to a TV through an AV  
amplifier (receiver), try connecting the  
HDMI cable directly to the TV. Refer  
also to the instruction manual supplied  
with the AV amplifier (receiver).  
, There is no sound if you connect an  
AV amplifier to the HDMI OUT 1  
jack, and set [AV Separation Output  
Mode] to [On] (page 34). Set [AV  
Separation Output Mode] to [Off], or  
connect the AV amplifier to the HDMI  
36  
 
     
OUT 2 jack (See “About AV  
, The HDMI OUT jack is connected to a  
DVI device. (DVI jacks do not accept  
audio signals.)  
, The device connected to the HDMI  
OUT jack does not support the audio  
format of the player. Check the audio  
settings (page 31).  
USB device  
The player does not detect a USB  
device connected to the player.  
, Make sure that the USB device is  
securely connected to the USB jack.  
, Check if the USB device or a cable is  
damaged.  
, Check if the USB device is on.  
, If the USB device is connected via a  
USB hub, connect the USB device  
directly to the player.  
The HD Audio (Dolby Digital Plus,  
Dolby TrueHD, DTS-HD High  
Resolution Audio, and DTS-HD  
Master Audio) is not output by  
bitstream.  
, Set [BD Audio MIX Setting] to [Off]  
in the [Audio Settings] setup  
SEN (Sony Entertainment  
Network)  
The picture/sound is poor/certain  
programmes display a loss of detail,  
especially during fast-motion or dark  
scenes.  
, Check that the connected AV amplifier  
(receiver) is compatible with each HD  
Audio format.  
, Picture/sound quality may be poor  
depending on Internet content  
providers.  
The interactive audio is not output.  
, Set [BD Audio MIX Setting] to [On] in  
the [Audio Settings] setup (page 31).  
, Picture/sound quality may be  
improved by changing the connection  
speed. We recommend a connection  
speed of at least 2.5 Mbps for standard  
definition video (10 Mbps for high  
definition video).  
Disc  
The disc does not play.  
, The disc is dirty or skewed.  
, Not all videos will contain sound.  
, The disc is upside down. Insert the disc  
with the playback side facing down.  
, The disc has a format that cannot be  
played back by this player (page 40).  
, The player cannot play a recorded disc  
that has not been correctly finalised.  
, The region code on the BD or DVD  
does not match the player.  
The picture is small.  
, Press M to zoom in.  
37  
 
 
interrupt the communication. Move  
the player away from such devices, or  
turn off such devices.  
Skype  
There is severe humming or noise.  
, Set the volume of the connected TV  
lower.  
, Try moving the web camera with  
microphone away from the speakers of  
the connected TV.  
The desired wireless router is not  
shown in the wireless network list.  
, Press RETURN to return to the  
previous screen, and try [Wireless  
Setup(built-in)] again. If the desired  
wireless router is still not detected,  
select [Manual registration].  
Network connection  
The message [A new software version  
is available. Please go to the "Setup"  
section of the menu and select  
"Network update" to perform the  
update.] appears on the screen when  
turning the player on.  
The player cannot connect to the  
network.  
, Check the network connection  
(page 16) and the network settings  
update the player to a newer software  
version.  
You cannot connect your PC to the  
Internet after [Wi-Fi Protected Setup  
(WPS)] is performed.  
, The wireless settings of the router may  
change automatically if you use the  
Wi-Fi Protected Setup function before  
adjusting the settings of the router. In  
this case, change the wireless settings  
of your PC accordingly.  
You cannot start the PARTY  
STREAMING function.  
, Check that [PARTY Auto Start] is set  
to [On] in [Network Settings]  
You cannot connect the player to the  
wireless LAN router.  
“Control for HDMI” (BRAVIA  
Sync)  
, Check if the wireless LAN router is on.  
, Depending on the surrounding  
environment, such as the wall material,  
radio wave receiving condition, or  
obstacles between the player and the  
wireless LAN router, the  
The [Control for HDMI] function does  
not work (BRAVIA Sync).  
, Check that your TV is connected via  
the HDMI OUT 1 jack. If your TV is  
connected via the HDMI OUT 2 jack,  
BRAVIA Sync is disabled.  
communication distance may be  
shortened. Move the player and the  
wireless LAN router closer to each  
other.  
, Check that [Control for HDMI] is set  
to [On] (page 33).  
, Devices that use a 2.4 GHz frequency  
band, such as a microwave, Bluetooth,  
or digital cordless device, may  
, If you change the HDMI connection,  
turn the player off and on again.  
38  
 
 
, If power failure occurs, set [Control  
for HDMI] to [Off], then set [Control  
for HDMI] to [On] (page 33).  
, Check the following and refer to the  
instruction manual supplied with the  
component.  
Playback does not start from the  
resume point where you last stopped  
playing.  
, The resume point may be cleared from  
memory depending on the disc when  
– you open the disc tray.  
– the connected component is  
compatible with the [Control for  
HDMI] function.  
– the connected component’s setting  
for the [Control for HDMI] function  
is correct.  
– you disconnect the USB device.  
– you play other content.  
– you turn off the player.  
The disc tray does not open and  
“LOCK” or “D ON” appears on the  
front panel display.  
, When “LOCK” appears, the player is  
locked. To cancel the Child Lock, hold  
down N on the player until  
“UNLOCK” appears on the front panel  
, When “D ON” appears, contact your  
Sony dealer or local authorised Sony  
service facility.  
, When you connect the player to a TV  
through an AV amplifier (receiver),  
– if the AV amplifier (receiver) is not  
compatible with the [Control for  
HDMI] function, you may be unable  
to control the TV from the player.  
– if you change the HDMI  
connection, disconnect and  
reconnect the mains lead, or a power  
failure occurs, try the following:  
1Switch the input selector of the  
AV amplifier (receiver) so that the  
picture from the player appears on  
the TV screen. 2Set [Control for  
HDMI] to [Off], then set [Control  
for HDMI] to [On] (page 33). Refer  
to the instruction manual supplied  
with the AV amplifier (receiver).  
The disc tray does not open and you  
cannot remove the disc even after you  
press Z.  
, Try the following: 1Press down Z  
and N on the player for more than 10  
seconds, until the tray opens.  
2Remove the disc. 3When “OPEN”  
appears on the front panel display,  
press down [/1 on the player for more  
than 10 seconds, until the player turns  
off.  
The System Power-Off function does  
not work (BRAVIA Sync).  
, Check that [Control for HDMI] and  
[HDMI:Linked to TV-off] are set to  
“Exxxx” or “TEMP” appears on the  
front panel display.  
, When “Exxxx” appears, contact your  
nearest Sony dealer or local authorised  
Sony service facility and give the error  
code.  
, When “TEMP” appears, try the  
following: 1Check that the  
Others  
Playback does not start from the  
beginning of content.  
, Press OPTIONS, and select [Play from  
start].  
ventilation holes on the rear of the  
39  
 
   
player are not blocked. 2Place the  
player in a location with adequate  
ventilation to prevent heat build-up in  
the player.  
Wireless  
Wireless LAN standard:  
IEEE802.11b/g/n  
Frequency range:  
2.4 GHz band: Channels 1-13  
Modulation:  
The player does not respond to any  
button.  
DS-SS Modem and OFDM Modem  
, Moisture has condensed inside the  
General  
Power requirements:  
220–240 V AC, 50/60 Hz  
Power consumption:  
21 W  
, Hold down [/1 on the player for more  
than 10 seconds until the indicators on  
the front panel display turn off.  
If the player still does not respond to  
any button, disconnect then reconnect  
the mains lead.  
Dimensions (approx.):  
430 mm × 193 mm × 42 mm  
(width/depth/height) incl. projecting  
parts  
Mass (approx.):  
1.9 kg  
Operating temperature:  
5 ºC to 35 ºC  
Operating humidity:  
Specifications  
25 % to 80 %  
System  
Laser: Semiconductor laser  
Supplied accessories  
Audio/video cable (phono plug ×3) (1)  
(models for Australia and New  
Zealand only)  
Remote commander (remote) (1)  
R6 (Size AA) batteries (2)  
Inputs and outputs  
(Jack name:  
Jack type/Output level/Load  
impedance)  
Specifications and design are subject to  
change without notice.  
LINE OUT R-AUDIO-L:  
Phono jack/2 Vrms/10 kilohms  
DIGITAL OUT (OPTICAL):  
Optical output jack/–18 dBm  
(wave length 660 nm)  
DIGITAL OUT (COAXIAL):  
Phono jack/0.5 Vp-p/75 ohms  
HDMI OUT:  
Playable discs  
HDMI 19-pin standard connector  
LINE OUT VIDEO:  
Phono jack/1.0 Vp-p/75 ohms  
LAN (100):  
100BASE-TX Terminal  
USB:  
Blu-ray  
Disc  
BD-ROM  
BD-R /BD-RE  
*2  
*2  
*1  
*3  
DVD  
DVD-ROM  
DVD-R/DVD-RW  
DVD+R/DVD+RW  
USB jack Type A (For connecting a  
USB memory, memory card reader,  
digital still camera, and digital video  
camera)  
*3  
CD  
CD-DA (Music CD)  
CD-ROM  
CD-R/CD-RW  
Super Audio CD  
40  
 
               
*1  
Since the Blu-ray Disc specifications are  
new and evolving, some discs may not be  
playable depending on the disc type and the  
version.  
The audio output differs depending on the  
source, connected output jack, and selected  
audio settings.  
Note about double-layer BDs/DVDs  
The playback pictures and sound may be  
momentarily interrupted when the layers  
switch.  
Region code (BD-ROM/DVD VIDEO  
only)  
Your player has a region code printed on  
the rear of the unit and will only play  
BD-ROMs/DVD VIDEOs labelled with  
*2  
*3  
BD-RE: Ver.2.1  
BD-R: Ver.1.1, 1.2, 1.3 including organic  
pigment type BD-R (LTH type)  
The BD-Rs recorded on a PC cannot be  
played if postscripts are recordable.  
A CD or DVD disc will not play if it has not  
been correctly finalised. For more  
information, refer to the instruction manual  
supplied with the recording device.  
identical region codes or  
.
ALL  
Region code  
Discs that cannot be played  
• BDs with cartridge  
• BDXLs  
• DVD-RAMs  
• HD DVDs  
• DVD Audio discs  
• PHOTO CDs  
• Data part of CD-Extras  
• Super VCDs  
• Audio material side on DualDiscs  
Note on Discs  
This product is designed to playback  
discs that conform to the Compact Disc  
(CD) standard. DualDiscs and some of  
the music discs encoded with copyright  
protection technologies do not conform  
to the Compact Disc (CD) standard,  
therefore, these discs may not be  
playable by this product.  
Note on playback operations of BDs/  
DVDs  
Some playback operations of BDs/  
DVDs may be intentionally set by  
software producers. Since this player  
plays BDs/DVDs according to the disc  
contents the software producers  
designed, some playback features may  
not be available.  
41  
 
 
*5  
The player plays AVCHD format files that  
are recorded on a digital video camera, etc.  
The AVCHD format disc will not play if it  
has not been correctly finalised.  
The player does not play coded files such as  
Lossless.  
The player does not play animated PNG or  
animated GIF files.  
For MPO files other than 3D, the key image  
or the first image is displayed.  
Playable types of files  
Video  
*6  
*7  
*8  
File format  
Extensions  
MPEG-1 Video/  
PS  
“.mpg,”  
“.mpeg,”  
*1*2  
MPEG-2 Video/PS, “.m2ts,” “.mts”  
*1*3  
TS  
*1*2  
b
MPEG-4 AVC  
“.mkv,” “.mp4,”  
“.m4v,” “.m2ts,”  
“.mts”  
• Some files may not play depending on the  
file format, file encoding, recording  
condition, or DLNA server condition.  
• Some files recorded or edited on a PC may  
not play.  
• The player can recognise the following files  
or folders in BDs, DVDs, CDs and USB  
devices:  
*1*2  
WMV9  
“.wmv,” “.asf”  
*2*4  
*5  
AVCHD  
Xvid  
“.avi”  
– up to folders in the 9th layer, including the  
root folder  
– up to 500 files/folders in a single layer  
• The player can recognise the following files  
or folders stored in the DLNA server:  
– up to folders in the 19th layer  
– up to 999 files/folders in a single layer  
• Some USB devices may not work with this  
player.  
• The player can recognise Mass Storage  
Class (MSC) devices (such as flash memory  
or an HDD), Still Image Capture Device  
(SICD) class devices and 101 keyboard  
(front USB jack only).  
Music  
File format  
Extensions  
MP3 (MPEG-1 Audio “.mp3”  
Layer III)  
*1*2*6  
AAC/HE-AAC  
WMA9  
“.m4a”  
“.wma”  
*1*2*6  
Standard  
LPCM  
“.wav”  
Photo  
File format  
JPEG  
PNG  
Extensions  
• To avoid data corruption or damage to the  
USB memory or devices, turn the player off  
when connecting or removing the USB  
memory or devices.  
“.jpg,” “.jpeg”  
7
“.png* ”  
• The player may not play high bit rate video  
files on DATA CDs smoothly. You are  
recommended to play such files using a  
DATA DVD or DATA BD.  
7
GIF  
“.gif* ”  
8
MPO  
*1  
“.mpo* ”  
The player does not play coded files such as  
DRM.  
The player does not play this file format on  
a DLNA server.  
The player can only play standard  
definition video on a DLNA server.  
The player can play AVCHD Ver. 2.0  
(AVCHD 3D/Progressive) format files.  
*2  
*3  
*4  
42  
 
 
About wireless LAN security  
Notes About the Discs  
• To keep the disc clean, handle the disc by its  
edge. Do not touch the surface.  
Dust, fingerprints, or scratches on the disc  
may cause it to malfunction.  
Since communication via the wireless  
LAN function is established by radio  
waves, the wireless signal may be  
susceptible to interception. To protect  
wireless communication, this player  
supports various security functions. Be  
sure to correctly configure the security  
settings in accordance with your network  
environment.  
• Do not expose the disc to direct sunlight or  
heat sources such as hot air ducts, or leave it  
in a car parked in direct sunlight as the  
temperature may rise considerably inside  
the car.  
• After playing, store the disc in its case.  
• Clean the disc with a cleaning cloth. Wipe  
the disc from the centre out.  
No Security  
Although you can easily make settings,  
anyone can intercept wireless  
communication or intrude into your  
wireless network, even without any  
sophisticated tools. Keep in mind that  
there is a risk of unauthorized access or  
interception of data.  
WEP  
WEP applies security to  
communications to prevent outsiders  
from intercepting communications or  
intruding into your wireless network.  
WEP is a legacy security technology that  
enables older devices, which do not  
support TKIP/AES, to be connected.  
• Do not use solvents such as benzine, thinner,  
commercially available disc/lens cleaners,  
or anti-static spray intended for vinyl LPs.  
• If you have printed the disc’s label, dry the  
label before playing.  
• Do not use the following discs.  
– A lens cleaning disc.  
– A disc that has a non-standard shape (e.g.,  
card, heart).  
– A disc with a label or sticker on it.  
– A disc that has cellophane tape or sticker  
adhesive on it.  
• Do not resurface the playing side of a disc to  
remove surface scratches.  
WPA-PSK (TKIP), WPA2-PSK (TKIP)  
TKIP is a security technology developed  
to correct for the deficiencies of WEP.  
TKIP assures a higher security level than  
WEP.  
WPA-PSK (AES), WPA2-PSK (AES)  
AES is a security technology that uses an  
advanced security method that is distinct  
from WEP and TKIP.  
AES assures a higher security level than  
WEP or TKIP.  
43  
 
     
Code Language  
Code numbers of  
controllable TVs  
1144 English  
1149 Spanish  
1151 Basque  
1165 Finnish  
1171 Faroese  
1181 Frisian  
1186 Scots Gaelic 1194 Galician  
1196 Guarani  
1209 Hausa  
1226 Croatian  
1233 Armenian  
1239 Interlingue  
1248 Indonesian  
1254 Italian  
1261 Japanese  
1283 Javanese  
1297 Kazakh  
1145 Esperanto  
1150 Estonian  
1157 Persian  
1166 Fiji  
1174 French  
1183 Irish  
While holding down -TV- [/1, enter the  
TV manufacturer’s code using the  
number buttons.  
If more than one code number is listed,  
try entering them one at a time until you  
find the one that works with your TV.  
1203 Gujarati  
1217 Hindi  
1229 Hungarian  
1235 Interlingua  
1245 Inupiak  
1253 Icelandic  
1257 Hebrew  
1269 Yiddish  
1287 Georgian  
Manufacturer  
Sony  
Code number  
01 (default)  
Hitachi  
24  
LG/Goldstar  
Loewe  
76  
1298 Greenlandic;  
Kalaallisut  
45  
1299 Cambodian; 1300 Kannada  
Khmer  
Panasonic  
Philips  
17, 49  
06, 08, 72  
71  
1301 Korean  
1307 Kurdish  
1313 Latin  
1305 Kashmiri  
1311 Kirghiz  
1326 Lingala  
Samsung  
Sharp  
1327 Laothian; Lao 1332 Lithuanian  
29  
1334 Latvian  
1347 Maori  
1350 Malayalam  
1353 Moldavian  
1357 Malay  
1345 Malagasy  
1349 Macedonian  
1352 Mongolian  
1356 Marathi  
1358 Malese;  
Maltese  
Toshiba  
38  
Language code list  
1363 Burmese  
1369 Nepali  
1379 Norwegian  
1403 Oromo  
1417 Punjabi;  
Panjabi  
1435 Pashto;  
Pushto  
1365 Nauru  
1376 Dutch  
1393 Occitan  
1408 Oriya  
1428 Polish  
For details, see “BD/DVD Viewing  
The language spellings conform to the  
ISO 639: 1988 (E/F) standard.  
Code Language  
1436 Portuguese  
1027 Afar  
1028 Abkhazian  
1039 Amharic  
1045 Assamese  
1052 Azerbaijani  
1057 Byelorussian  
1060 Bihari  
1066 Bengali  
1070 Breton  
1093 Corsican  
1103 Welsh  
1463 Quechua  
1481 Rhaeto-  
Romance  
1032 Afrikaans  
1044 Arabic  
1051 Aymara  
1053 Bashkir  
1059 Bulgarian  
1061 Bislama  
1067 Tibetan  
1079 Catalan  
1097 Czech  
1105 Danish  
1482 Kirundi; Rundi 1483 Romanian  
1489 Russian  
1495 Sanskrit  
1501 Sangho;  
Sango  
1503 Singhalese; 1505 Slovak  
Sinhalese  
1506 Slovenian  
1508 Shona  
1511 Albanian  
1491 Kinyarwanda  
1498 Sindhi  
1502 Serbo-  
Croatian  
1507 Samoan  
1509 Somali  
1512 Serbian  
1109 German  
1142 Greek  
1130 Bhutani;  
Dzongkha  
44  
 
 
Code Language  
1513 Siswati; Swati 1514 Sesotho;  
Sotho  
southern  
1515 Sundanese  
1517 Swahili  
1525 Telugu  
1528 Thai  
1516 Swedish  
1521 Tamil  
1527 Tajik  
1529 Tigrinya  
1532 Tagalog  
1531 Turkmen  
1534 Setswana;  
Tswana  
1535 Tonga; Tonga  
islands  
1538 Turkish  
1540 Tatar  
1539 Tsonga  
1543 Twi  
1557 Ukrainian  
1572 Uzbek  
1587 Volapük  
1632 Xhosa  
1684 Chinese  
1703 not specified  
1564 Urdu  
1581 Vietnamese  
1613 Wolof  
1665 Yoruba  
1697 Zulu  
Parental control/area code  
Code Area  
2044 Argentina  
2046 Austria  
2070 Brazil  
2047 Australia  
2057 Belgium  
2090 Chile  
2092 China  
2115 Denmark  
2174 France  
2200 Greece  
2248 India  
2093 Colombia  
2165 Finland  
2109 Germany  
2219 Hong Kong  
2238 Indonesia  
2254 Italy  
2239 Ireland  
2276 Japan  
2304 Korea  
2333 Luxembourg 2363 Malaysia  
2362 Mexico 2376 Netherlands  
2390 New Zealand 2379 Norway  
2427 Pakistan  
2428 Poland  
2489 Russia  
2149 Spain  
2086 Switzerland  
2528 Thailand  
2424 Philippines  
2436 Portugal  
2501 Singapore  
2499 Sweden  
2543 Taiwan  
2184 United  
Kingdom  
45  
 
DLNA 20, 21, 35  
Dolby Digital 31  
DSD Output Mode 31  
DTS 31  
PARTY STREAMING  
Play information 19  
Playable discs 40  
POP UP/MENU 12  
Index  
Numerics  
3D 11, 18  
DVD 40  
3D Output Setting 29  
4K Output 31  
E
Q
Easy Setup 17, 35  
Quick Start Mode 34  
A
G
R
AUDIO 11  
Audio Settings 31  
Auto Standby 34  
Gracenote 21  
Gracenote Settings 34  
Region code 41  
Remote 11  
Resetting 35  
Resetting the player 35  
Resume 12, 39  
H
B
HDMI 30, 31  
HOME 12, 29  
Home menu 29  
BD/DVD Viewing  
Settings 32  
S
BD-LIVE 18  
BD-R 40  
BD-RE 40  
Bitstream 37  
Blu-ray Disc 40  
BONUSVIEW 18  
BRAVIA Sync 38  
Screen Settings 29  
SEN 11, 19  
I
Setup 29  
Skype 26  
Internet Browser 25  
Internet content 19  
IP Content NR Pro 23  
Software update 29, 34  
SUBTITLE 11  
System Settings 33  
M
MAC address 34  
Music Settings 33  
C
T
TOP MENU 11  
Troubleshooting 36  
TV Screen Size Setting  
for 3D 30  
Child Lock 9, 39  
Colour buttons 11  
Connecting  
AV amplifier  
(Receiver) 14  
Network 16  
N
Network Settings 34  
Network Update 29  
TV Type 30  
O
U
OPTIONS 12  
OSD Language 33  
Update 29  
USB 19  
Control for HDMI 33,  
P
W
D
Parental Control 33  
Parental Control  
Settings 33  
WEP 43  
Deep Colour 31  
Dimmer 33  
Display 12  
WPA2-PSK (AES) 43  
WPA2-PSK (TKIP) 43  
46  
 
 
WPA-PSK (AES) 43  
WPA-PSK (TKIP) 43  
47  
 
The software of this player may be updated in the future. For information about any  
available updates and the latest Operating Instructions, please visit the following  
website:  
For customers in European countries  
For customers in Australia/New Zealand  
To find out useful hints, tips and information about Sony products and services  
z
4-418-507-11(3)  
© 2012 Sony Corporation  
Printed in Malaysia  
 

Kyocera Printer FS 2000DN User Manual
Lexmark Printer Z13 Z23 Z33 User Manual
LG Electronics Cell Phone VI5225 User Manual
Liebert Sewing Machine CW026 User Manual
Life Fitness Treadmill 97TE XXXX 08 User Manual
Lincoln Electric Welder 11079 User Manual
Lindy TV Receiver 32898 User Manual
Linksys Network Card WUSB54AG User Manual
Makita Brush Cutter RBC411 User Manual
MartinLogan Speaker Ascent LoudSpeaker User Manual