PRODUCT OVERVIEW
The MS424 is a 4 channel 1 into 4 Unity Gain Active Microphone Splitter in a compact 1U self powered case.
The MS424 is designed for applications where multiple feeds are required from one set of microphones without
the signal degradation experienced with most passive splitting solutions. The Unity Gain design philosophy
allows simple integration into existing systems without the need for lengthy recalibration.
Each of the MS424 channels has an electronically balanced input, which may be transformer balanced as an
option, and four independently transformer buffered floating outputs on XLR connectors. Output one of each
channel may be linked directly to the input via a rear panel switch. The unit may also be configured, by way of
internal links, to feed 8, 12 or 16 outputs from any one input, allowing the MS424 to be used for press box
applications.
The front panel of the MS424 gives access to outputs 3 and 4 as well as phantom power switching with
phantom presence LED, and Pad switching for line level signals. The inputs and outputs 1&2 are grouped on
the rear panel together with the output 1 Link switches.
The MS424's internal power supply makes it ideally suited to smaller installations where it becomes highly cost
effective when compared to externally powered alternatives.
SPECIFICATIONS
ELECTRICAL
PHYSICAL
Frequency response:
Equivalent Input Noise: > -121dBu
THD:
Gain:
20Hz to 20kHz (+0, -0.5dB)
Input Connector:
Output Connectors:
Power Connection:
XLR 3 Pin (Pin 2 hot)
XLR 3 Pin (Pin 2 hot)
Detachable lead.
< 0.01 % (1kHz, 150R load)
0dB (-20dB with Pad)
2k
IEC 3 pin socket
Input Impedance:
Maximum Input Level: 0dBu (+20dBu with Pad)
Output Impedance:
Load Impedance:
Dimensions:
483mm (19") W
208mm (8.2") D
44mm (1.75") H
4.4kg
< 50R
>150R
Weight:
Shipping Weight:
Temperature Range:
5.4kg
Operating: 0∫C to 50∫C
Storage: -30∫C to 75∫C
15VA, 115/230V, 50/60Hz
Power Requirement:
BLOCK DIAGRAM
1
LINK
switch
Channel
jumpers
+48V Pad
2
3
1
Mic
Internal
bus
4
Input stage
Output stage
In keeping with our policy of continuous improvement LA Audio reserves the right to alter specifications without prior notice.
Manufactured in the UK by LA Audio, 6-24 Southgate Road, London, N1 3JJ.
Tel: +44 (0)207 923 7447, FAX: +44 (0)207 241 3644. Web: www.laaudio.co.uk. email: [email protected]
An SCV International Group Company
British
Originals
|